Clean, bright style that blends easily with your RV comes from a white wood laminate top with no visible grain. Sizes include 36L x 30W inch, 38L x 30W inch, 40L x 30W inch, 42L x 30W inch, and 44L x 30W inch to match your layout. During install, choosing careful screw length for flanges can help prevent slight bumps from telegraphing to the surface.
Pre-mark leg locations since some tops don't have guidance circles. Use hand tools and avoid overdriving; long screws can telegraph slight bumps on the surface, so confirm screw length before install. If screws tend to strip at the mount, add a reinforced plate at the end. Hand-tighten and recheck after initial use.
Yes, it can be used as part of a dinette bed setup. Use two legs instead of one to increase support, and secure the top to side cleats. These aren't specifically designed for bed duty, so disperse weight across the table and benches; putting all your weight on the table can break it. Verify your bench spacing and support points before committing.
White Wood Laminate is plain white with no visible grain. If you're matching other finishes, note that Maple and Cherry are the options with wood grain. Grain direction isn't a factor on the white finish since there isn't one to align.
Sturdiness varies with pedestal style and tabletop weight. If you notice bounce or are worried about spills, two legs can reduce movement. Some tops weigh about 20 lbs while others can be heavier, so check your pedestal's support capacity. If the post mounts to the tabletop, confirm solid anchoring to prevent screws from stripping out.
White Wood Laminate tables are available in 36L x 30W Inch, 38L x 30W Inch, 40L x 30W Inch, 42L x 30W Inch, and 44L x 30W Inch. The 30" width measurement is exact. Measure your dinette opening before choosing a length to keep aisle space and cushion fit where you want them.
Filters
RV Dinette Table Parts or Accessories
