Patio Accessories - Camco

Hey Albert; it is hard to say without knowing what table you have and what exactly those legs are like. The #e79RR is designed for the etrailer tables but it could be used on something else. Are you planning to add additional legs or replace the…

It might be Dan but I wasn't able to pull any specific information off of the UFP 13674 part number you gave me. What you'll need to do is pull one of the hubs and read the part numbers stamped into the sides of the bearings. This information…

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

Hey Danny, what you would want is the ShakeStopper Heavy Duty 2 inch hitch part #MNT72VR which has a 400 lb tongue weight capacity and was designed with heavier bike racks in mind. The hitch you mentioned only has a 100 lb capacity so it would not be…

Many RV bumper manufacturers construct their product with a plastic cap or a hinged door instead of endcap, allowing bumper to be used for storage; apparently you have this type. Open that end piece to examine if the seam has spot welds (short welds…

Hi George, Most OEM bumpers are typically 4" x 4" so you could just go with the the #MNT72VR instead and add on the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets #MO34VR to increase the capacity of the OEM bumper to 400lbs.…

You could probably get away with using just one leg, but If you're wanting maximum sturdiness I'd definitely suggest going with at least two Replacement Leg Kit for etrailer RV Dinette Tables #e79RR or #e69RR. The #e69RR are recessed mounted,…

Hey Becky, The only replacement legs we currently offer for an RV dinette table would be the surface mount #e79RR or recessed mount #e69RR. If this is a collapsible leg that closing down into itself to turn the dinette into a bed then I'd reach…

Hey Martin! Carrier is no longer making RV AC units. Although there were some plug and play replacements available in the past, everything has switched to the new R32 refrigerant following 2025 EPA guidelines. This means a complete system replacement…

Hello Jeremy, I sent that number over to lippert and they were not able to find anything. Can you please send me a picture of the sticker if it is still on there? Should have a S/N number and and RPO number, I included a picture of what the stickers…

Thanks for the photo and it looks like we have the exact replacement for you, which is the Thule Replacement Ratcheting Wheel Strap #853-6512. This strap has the same measurements as the one in your photo and will work perfectly as a replacement.

I went out to the warehouse and pulled replacement strap #853-6512 to measure it for you. It is 10-7/8 inches long overall. This strap is meant as a replacement for the Thule Criterium bike rack.