Hey Bryan, we don't have any license plate holders that were specifically designed for the 24x60 etrailer Enclosed Cargo Carrier for 2" Hitches #e54VV but I am sure you could make the LP10SB work which is a universal style license plate…
Hey Virgil, welcome back! We no longer carry the 724860519 Goodyear Endurance ST235/85R16 Radial Trailer Tire. The closest comparable option I have is the Karrier ST235/85R16 Radial Trailer Tire item #KE83KV. Karrier ST235/85R16 item #KE83KV is a…
Hello Jackie, there are actually locks included in the Aluma-Tow adjustable 2" & 2-5/16" ball mount kits for 2" receivers: -silver #UR45PR -black #UR95PR There are actually 2 locking pins; 1 for the shank in the receiver, and 1 for…
Good day Brooke! That's a valid question as we just started carrying the Aluma-Tow ball mounts (Aluma-Tow 360 Adjustable 2-Ball Mount - 2" Hitch Silver #UR45PR and Black#UR95PR). They are very comparable in quality to the Trimax Adjustable…
Good morning Elijah. You are in luck, because Aluma-Tow does a really nice job of building these 360 adjustable ball mounts with extremely tight tolerances, making sure they don't have much play or wobble. I've towed with some lower quality…
Hey Ecimale, the Saris Edge Bike Rack part #SAR74YR that you referenced can be used with bikes that have fenders due to the angle the wheel clamp grabs the tire and the fact it's spring loaded. No need to buy an adapter! What kind of bike do you…
I am attaching a picture of the instructions for your application to the product page. The instructions say to put the jack in the proper location for your trailer application, then weld on both sides of the jack length using a 3/16 inch fillet…
Probably not unless you want to cut that round hole into a 2-1/4" square. The Square A-Frame Jack w/ Footplate item #e74VV is designed for a-frame trailer's that have a square cut out not the standard 2-1/4" circular cut out which I am…
Hey Walter, the Karrier tires part #AM10210 and #KE78KV both are really similar tires from Karrier. They both have same speed rating of 81 mph, Load Range of D, and weight capacity of 1,650 lbs. The only really noteworthy difference is the tread…
The style of roof rack you are looking for is referred to as a "flush bar" rack which means the bars of the rack do not extend out past the feet of it. The flush bar style of rack that fits your 2019 Subaru Outback Touring with flush rails…
Hello Justin, thanks for reaching out. Going from a load range C tire up to a load range D likely will not change the ride quality in any noticeable way. You would not be increasing the carrying capacity of your trailer, but the higher rated tires…
Scott, here are our 2 options closest to the dimensions you gave. 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles #e54SR 25-1/8" eye center to eye center 3-1/4" height from eye center to top of leaves center spring 3-Leaf Double-Eye…
Hey Bryan, we don't have any license plate holders that were specifically designed for the 24x60 etrailer Enclosed Cargo Carrier for 2" Hitches #e54VV but I am sure you could make the LP10SB work which is a universal style license plate…
Hey Virgil, welcome back! We no longer carry the 724860519 Goodyear Endurance ST235/85R16 Radial Trailer Tire. The closest comparable option I have is the Karrier ST235/85R16 Radial Trailer Tire item #KE83KV. Karrier ST235/85R16 item #KE83KV is a…
Hello Jackie, there are actually locks included in the Aluma-Tow adjustable 2" & 2-5/16" ball mount kits for 2" receivers: -silver #UR45PR -black #UR95PR There are actually 2 locking pins; 1 for the shank in the receiver, and 1 for…
Good day Brooke! That's a valid question as we just started carrying the Aluma-Tow ball mounts (Aluma-Tow 360 Adjustable 2-Ball Mount - 2" Hitch Silver #UR45PR and Black#UR95PR). They are very comparable in quality to the Trimax Adjustable…
Good morning Elijah. You are in luck, because Aluma-Tow does a really nice job of building these 360 adjustable ball mounts with extremely tight tolerances, making sure they don't have much play or wobble. I've towed with some lower quality…
Hey Ecimale, the Saris Edge Bike Rack part #SAR74YR that you referenced can be used with bikes that have fenders due to the angle the wheel clamp grabs the tire and the fact it's spring loaded. No need to buy an adapter! What kind of bike do you…
I am attaching a picture of the instructions for your application to the product page. The instructions say to put the jack in the proper location for your trailer application, then weld on both sides of the jack length using a 3/16 inch fillet…
Probably not unless you want to cut that round hole into a 2-1/4" square. The Square A-Frame Jack w/ Footplate item #e74VV is designed for a-frame trailer's that have a square cut out not the standard 2-1/4" circular cut out which I am…
Hey Walter, the Karrier tires part #AM10210 and #KE78KV both are really similar tires from Karrier. They both have same speed rating of 81 mph, Load Range of D, and weight capacity of 1,650 lbs. The only really noteworthy difference is the tread…
The style of roof rack you are looking for is referred to as a "flush bar" rack which means the bars of the rack do not extend out past the feet of it. The flush bar style of rack that fits your 2019 Subaru Outback Touring with flush rails…
Hello Justin, thanks for reaching out. Going from a load range C tire up to a load range D likely will not change the ride quality in any noticeable way. You would not be increasing the carrying capacity of your trailer, but the higher rated tires…
Scott, here are our 2 options closest to the dimensions you gave. 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles #e54SR 25-1/8" eye center to eye center 3-1/4" height from eye center to top of leaves center spring 3-Leaf Double-Eye…
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
Sleek and Simple: Plain License Plates and Frames
Plain license plates and frames offer a clean, modern look that complements any vehicle. They are designed to provide full visibility of your license plate while adding a touch of elegance. Made with durable materials, these frames are built to withstand
Plain frames are versatile and designed to fit standard license plates, making them suitable for a wide range of vehicles, including cars, bikes, trailers, and watercraft. Their universal design ensures they can be easily adapted to different vehicle types.
Yes, many plain frames come with a variety of installation hardware, including marine-grade stainless steel screws and bolts. Some even include screw cap coverings to ensure a seamless look, making installation straightforward and the final appearance neat and tidy.
Plain frames offer a minimalist design that enhances the vehicle's aesthetics without overshadowing the license plate. They provide a clean, modern look that complements any car, bike, or trailer, making them a popular choice for those who appreciate understated elegance.
Plain frames protect the license plate by providing a sturdy border that prevents bending and damage. They also help keep the plate clean from dirt and bugs, ensuring it remains visible and in good condition, which is especially beneficial for specialty plates.
Plain license plate frames are often crafted from high-quality materials like marine-grade stainless steel, ensuring durability and resistance to rust. This makes them ideal for withstanding harsh weather conditions, from snow to intense sun, while maintaining a sleek appearance.
Filters
