Hitch Adapter

Welcome back Rex and thanks for all of the information! For a e-bike rated bike rack with a ramp, I recommend the Yakima OnRamp LX item #Y88DJ. The Yakima OnRamp LX item #Y88DJ is designed to fit a 2" receiver and is rated for use behind a 5th…

Hey, David! Nope, when the removable receiver is taken off the Stealth Hitches Hidden Rack Receiver #SH34CR, nothing will hang below your bumper or fascia. That's one of the main things that Stealth Hitch focuses on when designing their hitches.…

Hi Martin! You're actually looking at the reducer sleeve I'd recommend. The BTBRV Magnetic Hitch Receiver Reducer Sleeve, Part #BTBRV64FR, is the tightest fitting 2-1/2 inch to 2 inch reducer we carry, and it's my favorite for minimizing…

I spoke with my contact at Lock N Roll about the Lock N Roll Articulating Hitch part #336VS503505 and they were not quite sure what measurements you are looking for nor was I. That said, I went out to our warehouse for you and jotted down a few…

The Tekonsha T-One Vehicle Wiring Harness #TK99FR does include both the converter and the 4 Flat plug and will be very similar to the OEM Toyota parts you found, just put together in one kit. I included an image that should clear everything up for…

Hey Kevin, welcome back! You are correct, since you have ParkSense on your 2026 Rubicon the #RM-152 is not the correct wiring kit. What you need instead is the Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights #RM47ZR. This will get…

The Ford Transit if equipped with the factory tow package would have came with both a trailer hitch and trailer connector and they would both be located directly under the rear bumper so odds are you do not have either because they are not hard to…

Greetings David, thanks for reaching out. The Replacement 18:1 Tuson Motor for Lippert Through-Frame Slide-outs #LC125802 is the correct replacement for the Thomson 7828696. The #TUS24FR you mentioned is similar, but according to Lippert this is not…

Hi Steve, The Curt Hitch Receiver Reducer Sleeves - 3inch to 2-1/2inch or 2-inch part #C45408 has a pin hole diameter of 3/4". However, since this is adapting all the way down to a 2 inch, you'll need to use a 5/8" pin because the pin…

Hey Pat, so we have the RockyMounts hitch extension part #RKY10011 which is an 8 inch extension that has an anti-rattle hitch pin/lock built into it like it sounds like you are looking for.

The hitch I recommend that fits a 2017 Honda Accord hybrid is the Curt #C11496. This hitch has a 1-1/4 inch receiver and will bolt on to your Accord hybrid. Note that this hitch is going to require the trimming of the underbody panel on your Accord…

I went ahead and spoke to my contact at Thule, and while you can technically use a hitch extender like the Roadmaster #RM-071-75, this will void the warranty if a problem were to occur with your Thule Apex XT 4 #TH9025XT. Although, the Roadmaster…