Use of a Hitch Extender for a Short Pinhole Distance to Use a Thule Apex XT 4 # TH9025XT
Published 06/23/2022 >
Products Featured in This Question
Question:
Good morning. We purchased a Thule Apex XT 4 Bike Rack for 1-1/4inch and 2inch Hitches - Tilting - TH9025XT from etrailer.com a few years ago. We now have a 2019 Toyota Highlander, but were disappointed to discover that the vehicles factory-installed standard 2inch tow receiver is not compatible. According to the Thule specs, the distance from the center of the hitch pin hole to the face of the hitch must be 1-1/2inch or greater to use this rack, and the vehicles hitch pin hole is less than 1-1/2 inch inch. Is it possible to use something like the Roadmaster Hitch Extender for Tow Bars - 2inch Hitches - 7-3/4inch Extension Item # RM-071-75 to make the bike rack compatible with the vehicle? We plan to place three regular bicycles on the rack, so the weight would be minimal. Thank you.
asked by: Pamela F
Expert Reply:
I went ahead and spoke to my contact at Thule, and while you can technically use a hitch extender like the Roadmaster # RM-071-75, this will void the warranty if a problem were to occur with your Thule Apex XT 4 # TH9025XT. Although, the Roadmaster provides you with 2-1/2" of length from the center of the outer pinhole to the face of the extender. It is also important to note that you decrease your overall hitch weight capacity by 50% when using this hitch extender.
If you are set on continuing to use your Thule Apex XT 4 # TH9025XT, the absolute safest option that won't void the warranty is to install a different hitch. I recommend the etrailer Hitch - 2" # e98844. The hitch pinhole distance from the face of the hitch is definitely compatible with the requirements by Thule. You can also rest assured that the rack won't interfere with your rear bumper when used on the # e98844.
Product Page this Question was Asked From
Roadmaster Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
- Hitch Adapters
- Hitch Extender
- Tow Bars
- 7-3/4 Inch Extension
- Fits 2 Inch Hitch
- 6000 lbs
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Thule Bike Rack Compatibility With Factory Hitch With Less Than 1.5 Inches From Pin Hole To End
- Shop: Trailer Hitch
- Q&A: Can a 2000 Ford Van 1-1/4" Hitch and Adapter be Used with the Swagman Swivel Swing Arm?
- Q&A: How Long are the Curt Hitch Extenders C45791 C76DR?
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Is There A 12" Hitch Extension I Can Use While Flat Towing?
- Q&A: How Much Weight will the Hitch Extender # RM-071-1075 Support?
- Q&A: Recommendation for Hitch Lock and Anti-Rattle Device for Roadmaster Hitch Extender
- Q&A: What Hitch Extension Can be Used For Motorhome With 5,000 lb Towing Capacity
- Article: Hitch Adapters and Extenders
- Article: Trailer Wiring Diagrams
- Article: Best Bike Racks for Electric Bikes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Ball Mount Basics: Weight Capacity, Class, and Size


