Generators - 9000 Starting Watts

Hi John; that's alright I couldn't find it either so I spoke with Weigh Safe to get the information for you. The head assembly on the #WS64RR weighs 35 lbs. The 2-1/2" shank is 32 lbs, and the spring bars weigh 21-1/2 lbs each.

Hey Judah, For below bed you would need to go with the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1108 and then use either the fixed base Companion #BWRVK3500 or slider base Companion #BWRVK3400-5W depending on whether you have a…

Dave, it is strongly recommended to remove the batteries when storing your RV for the winter, but i understand the pain behind it so a kit like the Go Power Overlander Solar Charging System with Digital Solar Controller #34282181 will be more than…

Hi Mark; there may be some TorkLift tie-downs compatible with those running boards but it depends on your total configuration. For example, you can use the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL66PR if you have the 8' bed…

Hey Steve! The PullRite SuperGlide #PUL83RR will not contact the tailgate on your 2025 GMC Sierra 2500. They have tested this extensively and said making contact and causing damage is not a concern. This is a really great hitch and autoslide is the…

Hey Steve, yes the Power Watchdog Surge Protector #HU82VR that you referenced is the most current version.

Hello Nathan, Great question. There are 2 key factors with finding the right Gen-Y Gooseneck, the pin box number, and the pin weight (tongue weight). I was able to look up the GVWR of your 2022 GD Reflection 367BHS which is 14,995 lbs. They have a…

The Go Power Solar Extreme Charging System #34282185 system paired with an 800 hour lithium battery bank will get you approximately a half day of run time for your 6,000 Btu window a/c unit. So while it is possible to run for emergency situations, it…

A keen observation indeed, Brett. The mounting hole spacing on the Square D-Ring Tie-Down Anchor #ABS69FR is 3" horizontally and 3-1/4" vertically. I edited a picture for you to help illustrate.

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

The CC316-01 number you referred to is the original part number of the fan motor. Is it a replacement fan blade or motor you're needing? If that's the case, you'd use the #BVD0218-00-R replacement motor. If you were needing a replacement…

Since you have a 400ah lithium battery bank the best option is going to be the Redarc In-Vehicle BCDC Battery Charger #331-BCDC1240D. This DC to DC charger works with 12V or 24V vehicle systems with standard or smart alternators and is compatible…