1. Home
2. Vehicle
3. Emergency Vehicle Lights
4. 12 Flash Patternsx

Hello Les, On the Shocker Hitch Air Shock Absorbing Gooseneck Coupler - 4" Round Tube - 30K - Bulldog Fit #SHK77MR from the very bottom to the first pin hole it is 13".

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…

The problem is either the power or the ground side of the wiring of the LED assemblies. First thing to do is check that 12 volts are making it to the trailer connector. You can use a circuit tester like our part #3808. Next, trace the wiring back to…

Most often the root cause for issues with trailer lighting is a weak ground. Strange as it may sound, a loose or rusty/corroded ground can cause a vehicle's trailer wiring harness to badly misbehave and shut down some functions. It may also just…

Hey Shawn, the MaxxAir II RV and Trailer Roof Vent Cover part #MA26JR that you referenced is translucent. It would allow the most light to pass through it of all options.

The Peterson 426E is a grommet mount lamp which is 4 inches in diameter. We don't offer that particular lamp, but it cross referenced to several lamps offered by Optronics. Here's what's available: • #BU45CB is a in incandescent lamp that…

The EB01-140 and EB01-145 are Redneck Trailer Supply part numbers for a Dexter 12-1/4 x 3-3/8 7-bolt brake assemblies for a 9-10K axle. The proper replacements are available as part #23-450-451, which includes the left and right self adjusting brake…

If you are simply needing to replace some worn equalizers then we actually do carry the part you are searching for. It is listed as part #K13-142-02 on our site and is a direct replacement for the 13-142 equalizer that you referenced. I confirmed…

I have a perfect solution for you! In order to attach the magnetic Blazer Amber Warning Light Bar #C4850AW to your aluminum body Ford F-250 I recommend using the Buyers Products Magnetic Mounting Plates #3378895404. These self adhesive magnetic mount…

The Custer 40-LED Light Bar w/ Controller Box - Magnet/Suction Cup Mount - 23" Long #STR-40-S will work well for your Hurst and funeral services. The magnets will not come into play with a fiberglass roof, but the suction cups will keep the…

Hey Kevin, What you had there was a Lippert 258998 triple step on your 5th wheel trailer. Lippert has told us that the correct replacement for this step is the Alumi-Tread Manual Pull-Out Step for RVs #LC432696.

Hello Les, On the Shocker Hitch Air Shock Absorbing Gooseneck Coupler - 4" Round Tube - 30K - Bulldog Fit #SHK77MR from the very bottom to the first pin hole it is 13".

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…

The problem is either the power or the ground side of the wiring of the LED assemblies. First thing to do is check that 12 volts are making it to the trailer connector. You can use a circuit tester like our part #3808. Next, trace the wiring back to…

Most often the root cause for issues with trailer lighting is a weak ground. Strange as it may sound, a loose or rusty/corroded ground can cause a vehicle's trailer wiring harness to badly misbehave and shut down some functions. It may also just…

Hey Shawn, the MaxxAir II RV and Trailer Roof Vent Cover part #MA26JR that you referenced is translucent. It would allow the most light to pass through it of all options.

The Peterson 426E is a grommet mount lamp which is 4 inches in diameter. We don't offer that particular lamp, but it cross referenced to several lamps offered by Optronics. Here's what's available: • #BU45CB is a in incandescent lamp that…

The EB01-140 and EB01-145 are Redneck Trailer Supply part numbers for a Dexter 12-1/4 x 3-3/8 7-bolt brake assemblies for a 9-10K axle. The proper replacements are available as part #23-450-451, which includes the left and right self adjusting brake…

If you are simply needing to replace some worn equalizers then we actually do carry the part you are searching for. It is listed as part #K13-142-02 on our site and is a direct replacement for the 13-142 equalizer that you referenced. I confirmed…

I have a perfect solution for you! In order to attach the magnetic Blazer Amber Warning Light Bar #C4850AW to your aluminum body Ford F-250 I recommend using the Buyers Products Magnetic Mounting Plates #3378895404. These self adhesive magnetic mount…

The Custer 40-LED Light Bar w/ Controller Box - Magnet/Suction Cup Mount - 23" Long #STR-40-S will work well for your Hurst and funeral services. The magnets will not come into play with a fiberglass roof, but the suction cups will keep the…

Hey Kevin, What you had there was a Lippert 258998 triple step on your 5th wheel trailer. Lippert has told us that the correct replacement for this step is the Alumi-Tread Manual Pull-Out Step for RVs #LC432696.