Yes we do, I attached a picture that shows the installation instructions for the Timbren Front Suspension Enhancement System #TGMFK15CA that you referenced.
Hello Hoan, thanks for reaching out. I double checked with the manufacturer, and they confirmed that yes, the etrailer Class 3 Hitch #e27KR will indeed fit the 2025 Honda Pilot Elite. It will be a no drill install and you will not need to cut any of…
I have a perfect solution for you! In order to attach the magnetic Blazer Amber Warning Light Bar #C4850AW to your aluminum body Ford F-250 I recommend using the Buyers Products Magnetic Mounting Plates #3378895404. These self adhesive magnetic mount…
Hey Bob, great question. It was about 7 degrees here in Missouri this morning, so I can relate to the cold. I do have a good solution for this too. What I would do is replace your current 7-way cord with the Curt Cold Weather 7-Way RV Style Connector…
Hello Tim, I am happy to get you into the right spring, but we need to know the weight of the door. You mentioned that the one you are replacing is "orange coded" but the issue is that there is not a real standard and companies use…
Your photo shows the 7-way trailer wiring setup that we call the RV format. The photo I linked shows an actual trailer plug #A10-7W6 like yours and the circuit arrangement is the same as your photo diagram. For reference, the included article covers…
It sounds like you have tested your truck with other trailers and your trailer with other trucks and have found the wiring circuits to connect and function correctly. This tends to suggest that there is just an issue between the two specific…
The reason that 10 Gauge #10-1-1 or 12 Gauge #12-1-1 wire is recommended for 10" brake assemblies, like part #AKEBRK-35-SA, is because they pull more power than the lights on your trailer. I believe the green wire you are referring to carries…
Hardware is not included for the Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens Item #LPL55CB, but you can make a trip to the local hardware store and pick up some bolts and nuts to secure the license plate, light…
A longer ball mount would be a decent idea I would think but since its going to be a Class II 1-1/4 inch ball there aren't super long options. Mostly everything will be about same length with some variations. If you can determine the rise/drop…
I confirmed with Progressive Dynamics that the replacement part you need is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V.
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Filters
