2020 Ford Ranger Truck Bed Mat

Hi Quintin! We do have bed mats that are confirmed to fit your 2025 Ford F150 with the 5.7 foot bed, but the Black Armour ones have not been yet. They will likely have one in the near future, I just can't say when that will be. That said, if you…

Hi Cody; are you looking for a particular tonneau cover style? If you want a soft roll-up cover you can use the Access Toolbox Edition #A62339. We also have the Extang Trifecta 2.0 Soft #EX93455 or Extang Solid Fold 2.0 Hard #EX84455 which are both…

Hey Gene, congrats on the new truck. For your 2026 Ford F-350 with a 6-1/2' bed, I recommend the BedTred Impact Truck Bed Mat - Trucks w/ Bare Beds or Spray-In Liners item #IMQ17SBS. This bed mat is made of 3/4" thick thermoplastic and also…

Yes, it is! You're going to need to cut out more than just the holes though when installing the DeeZee Custom-Fit Truck Bed Mat item #DZ28GJ. The mat is 3/8" thick so you'll have to cut out more of an H pattern or your 5th wheel hitch…

Hey Marshall, the Deezee Truck Bed Mat #DZ26GJ is 70 inches long and 71-1/2 inches wide and the width between the wheel housings 50-1/2 inch. Would these dimensions work for you?

Hey Justin, thanks for reaching out! I went out to the warehouse and confirmed that the Curt Adjustable 2-Ball Mount #C79NR measures 12-1/4" from the center of the hitch pin hole to the center of the hitch ball. Not sure what tape measure Curt…

Hey Don, we have the Westin part #W35XV that is a confirmed fit for your 2025 GMC Sierra 1500 with a 6-1/2 foot bed. It is 3/8 inch thick, would that work?

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

It sure will Jeremy. The DeeZee Custom-Fit Truck Bed Mat item #DZ28GJ will fit the 8' bed on a 2024 Ram 3500 dually. What kind of cargo do you haul in the bed of your truck?

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

When fitting a fifth-wheel hitch like the Curt A20 #C16034 on your 2022 Ford F-350 Super Duty with the BedRug Custom Truck Bed Liner - Full Bed Protection for Trucks with Bare Beds or Spray-In Liners #BRQ17LBK, it is important to the hitch completely…

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…