2018 Ram 2500 Truck Bed Mat

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Hey Joshua, with a utility knife the WeatherTech TechLiner part #WT52UK will not be difficult to cut to open up to your 5th wheel prep pucks. What hitch do you have?

Hello John, I have listed the different Torklift tie-downs, along with their weights, for your 2024 Ford F-350 below based on you looking at the #TL87DR. Both are designed to fit the 8' bed with a factory hitch or Torklift SuperHitch Magnum. The…

Yes, it will! The Hellwig Adjustable Big Wig Rear Anti-Sway Bar item #HE96XR is indeed compatible with air bags when installed on your 2024 GMC Sierra 3500. This is the right bar for your stock height truck. I would stay away from the Air Lift air…

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

Yes, it is! You're going to need to cut out more than just the holes though when installing the DeeZee Custom-Fit Truck Bed Mat item #DZ28GJ. The mat is 3/8" thick so you'll have to cut out more of an H pattern or your 5th wheel hitch…

No, I am sorry it does not Dave. None of our mats like the DeeZee Custom-Fit Truck Bed Mat item #DZ35GJ come with the puck pattern shown on the mat. If you have any additional questions feel free to reach out below in the comment box.

Hey Jim, thanks for reaching out! The DeeZee Custom-Fit Truck Bed Mat #DZ28GJ will fit your 2024 Ram 3500 as long as it's an 8' bed, the TorkLift Tie Downs #TL75FV will fit the truck as well, and then the TorkLift Locking FastGun Turnbuckles…

Hi Scott; the DeeZee Custom-Fit Truck Bed Mat #DZ88GJ is specifically designed to fit the 6-1/2' bed on your 2025 Ram 1500. No trimming or any kind of alteration will be required to install it in your truck bed.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hello Al, Great question. The Black Armour Heavy-Duty Custom Truck Bed Mat - Rubber - Black #BA56AR is custom cut for the 2006 Toyota Tacoma with the 6 foot bed. You will have access to the tie down anchors that you already have in the bed of the…

Hey Dave, we can definitely help but we don't have any kits that work as both trailer wiring and tow bar lighting for your 2024 Ford Bronco so you'll need to install both kits separately. But they will work fine together. For tow bar lighting…