Best Chevrolet Avalanche Cargo Carriers

change vehicle


Cargo Carriers Videos

Surco Hitch Cargo Carrier Review - 2013 Chevrolet Avalanche

Today on our 2013 Chevrolet Avalanche we'll be test fitting the 24x60 Cargo Carrier by Surco, part number 52018. To begin our test fit we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and install our pin and clip. Now we'll go ahead and go over some clearance measurements.We have a ground clearance here at the rear of the carrier of about 16 inches. The closest point of the carrier to the rear of the vehicle is 2 inches. We've added about 28 inches to the overall length of our vehicle.



Rola Dart Folding Hitch Cargo Carrier Review - 2013 Chevrolet Avalanche

Today on our 2013 Chevrolet Avalanche, we'll be test fitting the 23 by 56 Rola Dart Cargo Carrier, Part Number 59550. To begin our test fit, we'll slide the shank of our carrier into the receiver tube of our hitch, lineup the pinhole, and thread in our anti-rattle bolt, tightening it with a wrench. Now, we'll go ahead and go over a few clearance measurements. We have a ground clearance here of 16 inches. The closest point of our carrier to the rear of the vehicle is 4 inches. We've added 12 inches to the overall length of our vehicle when the cargo carrier is in its folded position. Now, we'll go ahead and pull their orange handle at the top of the carrier to lay our platform down. In this position, we have a ground clearance now at the rear of the carrier of 21 inches and we've added 38 inches to the overall length of our vehicle. Now, we'll go ahead and open up our tailgate.



Curt Folding Hitch Cargo Carrier Review - 2013 Chevrolet Avalanche

Today on our 2013 Chevrolet Avalanche we'll be test fitting the 24x60 Folding Cargo Carrier from Curt, part number c18132. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch. Line up the pin hole and install our pin and clip. Now we'll go ahead and go over a few clearance measurements.We have about 16 inches of ground clearance. With the cargo carrier in the folded position we've added about 11 inches to the overall length of our vehicle. Now we'll go ahead and pull the pin and clip at the base of the carrier to unfold our carrier.



Curt Folding Aluminum Cargo Carrier Review - 2013 Chevrolet Avalanche

Today on our 2013 Chevrolet Avalanche we'll be test fitting the Curt 20 x 60 Folding Aluminum Cargo Carrier, part number c18100. To begin our test fit we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. Now we'll go ahead and go over a few clearance measurements. We have a ground clearance of 15 inches. The closest part of the carrier to the rear of the vehicle is about 1/2 inch. With the carrier in the folded position we've added about 7 inches to the overall length of our vehicle.



Curt Hitch Cargo Carrier Review - 2013 Chevrolet Avalanche

Today on our 2013 Chevrolet Avalanche we'll be test fitting the Curt 20 x 48 Cargo Carrier, part number c18145. To begin our test fit we want to make sure that our shank has the adapter on it. Then we'll place the shank of our carrier into the receiver tube of our hitch, line up the pin hole, and thread in our anti-rattle bolt tightening it with a wrench. Now we'll go ahead and go over some clearance measurements. We have a ground clearance of 16 inches. The closest part of the carrier to the rear of the vehicle is 2 1/2 inches.



Pro Series Hitch Cargo Carrier Review - 2011 Chevrolet Avalanche

Today on our 2011 Chevrolet Avalanche, we're going to do a test fit on the Pro Series Solo. This cargo carrier is 31 x 47. It offers a 400 pound weight capacity. As you can see, it's been designed for use with 2 inch hitches. Part number on it is Ps1040100. As you can see, this is one of the larger cargo carriers that we offer. We'd recommend maybe having two people to help put it in the vehicle.



Curt 17x46 Hitch Cargo Carrier Review - 2011 Chevrolet Avalanche

Today on our 2011 Chevrolet Avalanche, we're going to do a test fit on the 17 x 46 Curt Cargo Carrier. Now as you can see here, they have designed this for use with inch and a quarter or with the hardware two inch hitches, part number on it is C18145. Now this compact cargo carrier is still going to offer us a very large five hundred pound weight capacity, so you're not giving up anything other than a little bit of space with it as compared to some of the other ones. The first step is that we need to slide the shank into the receiver tube of our hitch and line up our threaded hole with our hitch pinhole. With those in line, we've got an anti-rattle bolt which is provided. We're going to place that in and begin threading it through. As you can see, when we just have it hand tight, we've still got some play and some movement to our carrier.



MaxxTow Hitch Cargo Carrier Review - 2011 Chevrolet Avalanche

Today on our 2011 Chevrolet Avalanche we're going to do a test fit on the MaxxTow 20 by 47 aluminum cargo carrier. No they've designed this for use in 2" hitches. It offers a 500 pound weight capacity. The part number on it is MT70108. Now we've got a nice strong steel shank, but the aluminum construction really keeps the weight down on this, so if weight's going to be an issue this might be a really good choice. To begin our test fit we'll slide the shank of the carrier right into the receiver tube of our hitch. We've got a pinhole here.



MaxxTow Hitch Cargo Carrier Review - 2011 Chevrolet Avalanche

Today on our 2011 Chevrolet Avalanche we're going to do a test fit on the 17x50 MaxxTow Cargo Carrier. This is designed for use with 2-inch edges. Even with its compact design, it's going to offer us a 500-pound weight capacity. The Part Number on it is Mt70107. To begin our test fit, we're going to slide the shank of the carrier into the receiver tube of our hitch. We're going to slide it in far enough to line up our pin hole with our hitch pin hole. We're then using a standard 5/8 pin.



Detail K2 20x60 Hitch Cargo Carrier Review - 2011 Chevrolet Avalanche

Today on our 2011 Chevrolet Avalanche, were going to do a test-fit on the 24X60 Detail K2 Folding Cargo Carrier. Now, theyve designed this for use, as you can see, with two inch-hitches. It offers a 500-pound weight capacity. The part number on it is K2HCC602. Now to begin our test-fit, we slide the shank of the carrier right under the receiver tube of our hitch. As we do this, we will going to line up our pinhole with our hitch pin hole. We can take a standard 5/8 pin. Were going to slide that through.



Curt 24x60 Hitch Cargo Carrier Review - 2011 Chevrolet Avalanche

Today on our 2011 Chevrolet Avalanche, we're going to do a test fit on the 24 by 60 Curt Folding Cargo Carrier. They've designed this for use with 2 inch hitches, it has a 500 pound weight capacity. The part number on it is C18153. To begin our test fit, we need to slide the shank right into the receiver tube of our hitch. As we do, we line up our pin hole with our hitch pin hole. With those in line, we'll slide through our standard 5/8th pin and we'll slide our clip in the other side to secure it. The pin and clip are sold separately.



Curt 19x60 Hitch Cargo Carrier Review - 2011 Chevrolet Avalanche

Today on our 2011 Chevrolet Avalanche we're going to do a test fit on the 19 by 60 CURT folding cargo carrier. This has been designed for use in 2" hitches, offers a 500 pound weight capacity. Part number is C18100. Now the aluminum construction of this carrier makes it a very light one for installing in your vehicle, so if you've got any kind of weight limit or weight restriction this may be a really good choice for you. We're going to begin by sliding the shank into the receiver tube of our hitch. We'll need to line up our pinhole with our hitch pinhole. With those lined up we'll take our standard 5/8 pin, we'll slide this through.



Rola Dart Hitch Cargo Carrier Review - 2011 Chevrolet Avalanche

Today on our 2011 Chevrolet Avalanche we're going to do a test fit on the Rola Dart. This is a 23 by 56 folding cargo carrier. They've designed it for use with 2" hitches and it offers a 450 pound weight capacity. The part number on it is 59550. To begin our test fit we slide the shank of the carrier into the receiver tube of our hitch. As we do this we will want to line up our threaded hole with our hitch pinhole. With those in line we'll take our provided anti-rattle bolt; we'll slide that in and begin threading it through.



Surco Products 24x60 Hitch Cargo Carrier Review - 2011 Chevrolet Avalanche

Today on our 2011 Chevrolet Avalanche, we're going to do a test fit on the 24 by 60 Surco cargo carrier. This has been designed for use in 2 inch hitches. It offers a 500 pound weight capacity. The part number on it is 52018. To begin our test fit, we want to slide the shank of the carrier into the receiver tube of our hitch. As we do this, we need to line up our pin hole with our hitch pin hole. With those in line with one another, we'll take a standard 5/8 pin.





Chevrolet Avalanche Cargo Carriers Questions