Most Popular Steel Shank - Gloss Black for 2022 GMC Acadia

eTrailer is awesome. Product is of excellent quality and received it in only two days.

I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.

Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.

eTrailer is awesome. Product is of excellent quality and received it in only two days.

Hitch was great for my 2011 Acadia. Customer rep’s advice on electrical wiring package, etc. was invaluable. Hitch came in 2 days. I will definitely be ordering from them again.

The product was exactly what I needed. I have a GMC Acadia and the hitch is under the bumper by aprox 4". With a standard length ball mount I was not able to raise my lift gate on vehicle without hitting the trailer. The extra long ball mount did the trick. The service from eTrailer was excellent. The product shipped the same day I ordered it and I was able to track it with the provided shipping info. Thanks Juanita

definitely solid as a rock

Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.

Click to Enlarge

Click to Enlarge

Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.

With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

the product looks good. I'll use it next season.

Nice

This is a beast of a drawbar, solid forged steel & well finished. It's also very heavy and E-Trailer needed to ship 3 times because the first two broke out of the box they were packed in. (Someone in the USPS has a couple nice draw bars.) Fortunately the 3rd effort was much better packed in a reinforced box and was successfully delivered. E-Trailer customer service was exemplary in resolving the shipment issue & I will definitely shop with them again.

A nice solid constructed hitch. It should handle everything I hook up to

Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!

Click to Enlarge

Works great used for 3 different trailer we have handy it's heavy well made.

The product was exactly what I needed. I have a GMC Acadia and the hitch is under the bumper by aprox 4". With a standard length ball mount I was not able to raise my lift gate on vehicle without hitting the trailer. The extra long ball mount did the trick. The service from eTrailer was excellent. The product shipped the same day I ordered it and I was able to track it with the provided shipping info. Thanks Juanita

Hitch was great for my 2011 Acadia. Customer rep’s advice on electrical wiring package, etc. was invaluable. Hitch came in 2 days. I will definitely be ordering from them again.

Excellent construction. Heavier than I expected. Great draw bar for the price. Delivered quickly. No issues.

Haven't used it yet. I bought it because of CURT's quality. It was beat up in shipping though.

I recently had gotten a new tow vehicle and my 13' trailer was hooked up to and showed a lift to my hitch and back of trailer was lower. I called etrailer and talked with Cathy T who helped me with my problem. Very Satisfied with outcome.*****

Click to Enlarge

Fits my Forester dealer-installed 2 inch receiver perfectly with the pin (purchased separately) in the first hole. The gas tank is in the way so I can't push it in further to the second hole. It is impressively strong, so there is no problem with it extending rearward a bit, but ideally I would get a shorter hitch if I could have a do-over, just for ease of storage.

Hitch was great for my 2011 Acadia. Customer rep’s advice on electrical wiring package, etc. was invaluable. Hitch came in 2 days. I will definitely be ordering from them again.

The product was exactly what I needed. I have a GMC Acadia and the hitch is under the bumper by aprox 4". With a standard length ball mount I was not able to raise my lift gate on vehicle without hitting the trailer. The extra long ball mount did the trick. The service from eTrailer was excellent. The product shipped the same day I ordered it and I was able to track it with the provided shipping info. Thanks Juanita

great kit for my Acadia. this should cover me for almost any trailer is randomly have to grab.

Came in less than a week and was very easy to install. Have yet to use to pull a trailer.

Purchased for a 2006 Jeep liberty. the only issue I have is that it connects right below the spare tire, making trailer attachment more difficult that it should be. If I had gotten a slightly longer hitch, wouldn't have been an issue. It's not a deal breaker, and the hitch itself has works perfectly.

I haul a 5.5x10 open trailer w/ a 900 lb. ZTR, a push mower, and a handful of other tools 3 days a week. It is what it is. It does the job, no problem. A little finish wear and rust on the ball, but nothing major. I LIVE ON A DIRT ROAD, which is probably responsible for the wear.

Click to Enlarge

Heavy duty , very good quality.

Good quality part. Easy Install. Used for a year so far. No problems.

Great Hitch, reasonably priced

Hitch was great for my 2011 Acadia. Customer rep’s advice on electrical wiring package, etc. was invaluable. Hitch came in 2 days. I will definitely be ordering from them again.

The product was exactly what I needed. I have a GMC Acadia and the hitch is under the bumper by aprox 4". With a standard length ball mount I was not able to raise my lift gate on vehicle without hitting the trailer. The extra long ball mount did the trick. The service from eTrailer was excellent. The product shipped the same day I ordered it and I was able to track it with the provided shipping info. Thanks Juanita

Great quality and heavy duty. Perfect for my horse trailer and now my trailer is level with my new truck.

I was unable to find the correct size hitch in my small town, so I purchased the hitch, ball and pin from etrailer. The items were received in a timely maner and were securely packed. The hitch is well built and fits perfectly on my Ford F-250. Very pleased

Click to Enlarge

Absolutely outstanding! Everything fit perfectly and was easy to install. Customer service was the best I have ever experienced, far and away so. Very professional, friendly and helpful. I highly recommend this company and I wish everyone did business like them.

Nice combination to go with my front hitch for the F150.