# 1
B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw - 20,000 lbs
really like how well built the hitch is. It's heavy to lift but manageable. Head can be easily separated from frame by removing both quick pins to lift out of truck in 2 pieces. I plan on installing an electric hoist from Harbor freight in my garage to lift hitch in and out of truck in one piece. Definitely would recommend this hitch to anyone.
Very impressed with the quality and performance of this product
# 2
B&W Companion OEM 5th Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw - 25,000 lbs
Easy to install. F350 dually puck system. BakFlip cover doesn't make contact when closed with the hitch in the highest position.
This hitch is the finest engineered 5th wheel hitch I have used over a forty year period. I am very happy with my purchase and your finest service!!!
# 3
B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package - Dual Jaw - 20K
my companion 5th wheel hitch(rvk3370) hitch was delivered on 3/11, I installed it in a couple hours on 3/12. It was a piece of cake, the delivery was made with a lift gate truck that I back my truck up to and had the driver lower the lift gate down onto my tailgate, I unpackaged the hitch and was able to Maneuver it by myself into the puck system on my truck, I have the slider hitch so much heavier than the standard one, but still very easy for my 65 year old body to handle, the B t W was the only hitch I considered because of the ruggedness and quality of their products my truck is a 2023 Ford F 350
Will at eTrailer.com did a great job walking me through the 5th wheel hitch and air lift options that I needed. The B&W Companion Slider Hitch installed like a charm, and looks to be great quality! Nice fit and finish, B&W.
# 4
Demco Autoslide 5th Wheel Hitch w/ Slider - Single Jaw - Ford Super Duty Prep Package - 18K
Well built fifth wheel hitch. Haven't got a chance to tow our new Montana High Country 295RL. But I know a guy that has towed his fifth wheel with this same hitch. I'm sure this 18K hitch will be excellent! Or I wouldn't have bought it. I recommend e trailer for everything.
Item works exactly as described. I have a shortbed (6.5') Ford F350. Probably towed our 5th wheeler 5000+ miles with no problem. Then last year it happened! We were making a sharp turn in an uneven lot and POW, the 5vr hit the rear window and it exploded. After that I became gun shy about turning with the 5vr attached so I started looking at sliding hitches. A slider that you had to get out and unlatch to make work, didn't make sense to me. At what point do you get out? So, an auto slider hitch was purchased. Now when I get to a certain degree turn the auto-slide hitch moves back in its carriage and then auto-slides to the normal location once straightened out. Not gun shy anymore. Pro: Well packaged Well made Easy install It WORKS. Cons: Price Very heavy Some clunking after it straightens out from a turn
# 5
Demco Autoslide 5th Wheel Hitch w/ Slider - Single Jaw - Ford Super Duty Prep Package - 21K
Very high quality product. Used on a extended cab short bed F250 and the sliding mechanism provides plenty of clearance between the Fifth Wheel front and the truck's cab. Fits Ford's factory fifth wheel bed mount holes perfectly. Used to tow a 42' fifth wheel regularly. Foot print is small enough to allow me to retain my tool box in the truck during towing. The hitch is heavy! Do not plan to try to install with one person with out an engine hoist or gantry crane. Two strong people can, but extreme caution should be taken as the hitch weighs nearly 300lbs and is awkward.
I have a F350 Super Duty Short bed. This slider works as expected. The ease of backing or tight turns makes this product excellent without the need to pulls pins for extension. I can remove or install in 7 minutes without a problem without any assistance. I am pulling a 44 foot trailer and have not experience any chucking or sway even in windy conditions. Tows very smoothly
# 6
B&W Companion 5th Wheel Trailer Hitch - Dual Jaw - 20,000 lbs
I wanted to be able to easily utilize my truck bed and this hitch provides that in spades! Easy to remove and install. I absolutely have to give a shout out to Paula on customer service. She was amazing! My first shipment was damaged and missing a vital part. Paula had another one shipped right away and made my return shipment a breeze. She stayed in contact with me to the end. I felt like she shared in my joy once the install was complete! The hitch is super adjustable for optimal placement in the bed and height of the trailer. Make a few quick measurements and it just goes together quickly. Love the dual jaw release lever. Our last 5th wheel hitch had the standard pull to release lever and it was often very difficult to operate. This lever style is a game changer. Overall, I couldn't be more pleased with the product and customer service!
I installed this system in my classic square body Silverado after installing the Turnover Ball BK1400 gooseneck hitch. Both work great together and this companion installed beautifully. I tow a 40’ Cougar camper with it.
# 7
Curt A25 5th Wheel Trailer Hitch for Ford Towing Prep Package - Dual Jaw - 24,000 lbs
I received two packages and one package was damaged BUT no damage to components inside. I put the hitch together and installed it in truck everything was in boxes and there was no damage or scratches on all components. I haven't towed my rig yet BUT I did couple & uncouple it, everything seems smooth and really quiet couldn't even hear when it latched so for very impressed can't wait to tow. I give it a 4 star rating only because I haven't towed yet will be back in touch.
Hitch has worked great so far. Install took about 10 minutes in the Ford puck system. Height adjustment took about 2 hours, I started with the hitch at the top position, then moved to bottom, then moved to 2nd from the top for final. You just won't know where you want it until you hook up, tow it a mile, come back on level ground and check where you are at. Don't forget to retorque the bolts once a year, have had zero problems with hitch after a year. One thing of note, if you uneven raise/lower sometimes the hitch latch will not lock/unlock. if this happens, make sure your coach is as level as you can get it at the front. (3,500 miles towed, F450, Pinnacle 18k, tandem tow Seaark 2,400 lbs)
# 8
Curt A20 5th Wheel Trailer Hitch with Ford OEM Legs - Dual Jaw - 20,000 lbs
Delivery was quick and assembly was easy enough. I give it 4 stars instead of 5 because the jaws won't open consistently to unhitch without moving the truck back and forth. This is compounded when not on level ground. I had to pry the jaws apart to get them to open. My previous Curt hitch did not do this unless the truck and camper were very uneven.
Great experience. Called etrailer to ensure I had selected the proper 5th wheel hitch for my F-250 with OEM goose neck puck system. Hitch arrived earlier than expected in perfect condition. Installation was very simple (you will need a torque wrench at least 100 ft pounds). Coupling / uncoupling very smooth and positive color indicator very helpful.
# 9
B&W Companion 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 20,000 lbs
Extremely easy install. You will need a torque wrench that’ll go up to 110 ft/lbs. glad I did my research and went with the B&w gooseneck hitch in anticipation of getting this 5th wheel companion hitch at a later time.
Fast shipping and the box was in perfect condition. I appreciate the amazing customer service. They were friendly and had a good attitude when I called with questions. I look forward to shopping with them in the future. The shipping company called ahead of time and scheduled the delivery because it was such a large item they were friendly and was within their timeframe. Thank you etrailer.com I appreciate it.
# 10
Curt A16 5th Wheel Trailer Hitch with Ford OEM Legs - Dual Jaw - 16,000 lbs
Installation Instructions and Hardware provided -vs- exploded Views do not agree. 14mm Bolts and Nuts with Nylon Inserts we’re only provided NO Flat or Lock Washers were provided as shown in the exploded views.
easy to assemble and install. A bit confusing since it came lock nuts and not flat washer lock nut.
# 11
Demco UMS Double Pivot 5th Wheel Hitch - Single Jaw - Ford Super Duty Prep Package - 21K
Hitch is nice and makes me feel more comfortable being a more novice RV'er with the large steel bar that acts as a secondary safety, unlike one of the other big brands that just has teeth that close around the pin. Assembly took a couple hours of blood and sweat even though it really is very easy.... You have to make time to torque about 20 or so bolts, but that's pretty typical of anything you plan to drop up to 21k pounds on and jerk around all over the country. Install into/out of the truck bed is now a 5 minute project thanks to a block and tackle in the garage ceiling. Extremely easy to put in or remove as long as you have an overhead weight bearing device of some sort. Beyond my experience with dragging a 17k pound RV with it, the mfgr is VERY responsive if you call for help. I was missing 1 washer upon assembly and the sticker decal was damaged in shipping but the MFGR had new ones in my mailbox in 2 days at no charge. They are also VERY good on tech support. The only caution I have on this is make 100% sure you know what grade bolts you have and what you should torque them to. Novice mistake: I rated the bolts based on the chart in the instruction guide but I rated on head size, not the diameter and thus I over-torqued. Luckily I did not have the means to torque to the actual higher spec or I would have snapped them at 250ft-lbs. If you have any questions on correct torque, call the mfgr and as for tech support! As for usage experience: Carry a long stick with you. We end up on crooked camping sites frequently and the only issue is that while this hitch moves ALOT to accommodate, sometimes you may get up under the pin-box and you just can't get the hitch to snap shut. Having a long stick on-board will let you push on the spring-loaded part and cause it to snap closed. One last thing from experience: lube, lube, lube. Keep the thing lubed as per the manual and do not be stingy with it on the parts that slide and grab your king-pin. It helps out drastically in getting it to snap closed on the 1st try. As for lubing the top plate, everyone is using those plastic lube discs these days. They work fine BUT: They WILL cause you a bit of grief in getting the pin exactly where it needs to be to snap closed on occasion. The hitch has enough wiggle room to accomodate them but it is not 'designed' for it, so once you're 1/4" higher out of the hole than spec, sometimes you will have to play with it to get it shut. If you ever find yourself just TOTALLY unable to get it to close on the pin, put your jacks back down and pull out from under your trailer. I totally destroyed one of those plastic discs a week ago and spent 40 minutes fighting and cussing at the thing b/c it wouldn't close on my pin far enough to put the safety pin in the handle... I finally yanked the hitch out from under the trailer and I had caught the lube disc at an angle on the 1st try and it had ripped a gash in in. That extra misplaced material up under there was preventing me from being able to secure the pin. Aggravating: Yes. But I kinda like it. You will KNOW that there is an issue with your current hitching job with this thing. It can be unforgiving at times but when I have $80k of truck and $110k of RV depending on it, I'd rather it be unforgiving and tell me in a loud voice: "You screwed up your mount attempt, try again" than to get to the end of an entrance ramp and have the trailer come down on the truck bed. If I had to buy one again, I'd buy the same one.
Very simple install. Very well built unit. Had to remove 1 shim on 3 of the feet because the handles were way too tight. Had ro use a rubber mallet to turn them at first. After removing the shims, it is perfect. I purchased a small master lock to replace one of the cotter pins for the safety pins so that noone steals the hitch. No noise while driving with just the hitch installed at all. I have not had a chance to tow anything as of yet--- pick up my 40' 5er wed! Seems to be a very well made, good looking, compact hitch. This was installed in a 2018 F350 long bed dually woth the oem under bed puck system.
# 12
B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package - Dual Jaw - 20,000 lbs
6000 miles towing this year; loaded trailer weight 16,480 lbs (based on CAT scale weight tickets). Hitch is awesome. Very secure with no noticeable chucking. I can remove and install this hitch by myself. The two pieces are very manageable. My fifth B&W hitch over the years; 2 turnover ball goosenecks and 2 tow & stows. Quality hitches which I recommend highly.
Very happy with the B&W hitch we received. etrailer and their staff were excellent to work with. Shipping was sooner than projected. And the installation was extremely easy. Would absolutely use etrailer again as well as B&W products. Thank you all!
# 13
B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs
From the start,the folks at etrailer were very courteous and helpful. I called many times during the decision making process and everyone was always right there to help. When I finally decided to purchase the B&W 18K Patriot w/slider Bailey was there to help with the order. She explained the free freight shipping and it was a done deal. It arrived 1 day earlier than stated, as soon as I opened the cartons it was in fact the good ol' American made quality I was accustomed to growing up. I proceeded to install on the B&W rails I purchased and installed locally on my 2022 F250 Lariat/ Tremor.I had a small hick- up with the install and etrailer gave me B&W's # as they like to handle issues themselves. Stephanie at B&W was just as courteous. Overall a very pleasant experience. The Patriot was basically plug and play. I then connected my 2021 Grand Design 303RLS Reflection and rolled down yhe road. What a smooth and quiet ride, loved it! I would definitely recommend etrailer and their products. Thank you all that helped.
So far so good. Hitch appears to be good quality. It was easy to install after installing the mounting kit. I haven't used it yet so I can't comment on how it handles when pulling a camper.
# 14
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
Demco auto slide hitch works very well with my crew cab short bed Ram. Fits under my tonneau cover nicely. Trouble free thus far. Had to purchase a Demco plate for the camper to make the Rhino box hitch work. etrailer personnel were great in helping ensure I had the right products and kept me well informed of shipping dates.
My wife and I are full-time RVers, and have used this slider hitch from the get-go while traveling around seeing the country over the past year. We are happy with our purchase, which has proven to be both easy to hook up, adjust, and functions well, as advertised. The only matter I think you may want to address are the thick plastic removable maintenance access covers which tend to bow, and the areas around the attachment holes have melted, in the hot weather. Perhaps instead using a light metal for the covers would be better solution. We are very happy overall with this hitch, and plan to keep it . Thank you.
# 15
Curt A16 5th Wheel Trailer Hitch w/ Slider for Ford Towing Prep Package - Dual Jaw - 16,000 lbs
Curt A16 with Slider base for Ford OEM Pucks I went through a good bit of anxiety after trading my 2013 F-250 for a 2018 F-250 due to the height of the 2018. I did not pay close enough attention to bedrail and rear height and I was beside myself sick over it so this review might be a bit long while I explain my journey. I replaced a 2013 F-250 4WD with a Reese Pro Series 16K square tube slider universal mount with a 2018 F-250 with OEM pucks. I pull a 2015 Prime Time Crusader 315RST. I measured, I had boards with levels, mock up on hitch height, I read every forum and article I could find and still I was worried I had made a big mistake. Finally, I called eTrailer and talked to Molly and she had, (or went and got) plenty of answers as I had narrowed it down to the B&W BWRVK3370 20K Companion Slider and the Curt A12. I decided to not go for the “the most expensive is better” and went with the Curt A12 saving me about $300. The 20K B&W was the smallest they had and with an F-250 I would never really come close to that weight before I passed the GCVW limit so it made no sense. The Slider base for the Curt says it is the same base used up to 24K so if I ever do I can just buy the new head I believe. Ordered on a Saturday it arrived on Thursday at noon. No issues with shipping at all, the hitch came in 2 boxes strapped to a pallet. No damage like others experienced. Assembly took me about an hour because it is heavy and awkward to line up the slider linkage but all in all nothing too difficult. I set the hitch head mount at the 2nd from the bottom (18 inch) hitch height because I had measured the truck and camper and was worried about having 6 inches of clearance camper to bed rail. Turns out on a 2018 F-250 4WD at the 18-inch level on the hitch I have 8 inches all around and 7 inches at the highest point on the tailgate. After I installed the hitch and put the camper on the truck and applied weight I got about 3-4 inches of squat, which made the already rear high truck sink to near level. I do have more nose high attitude on the trailer than I had before but it was not terrible. I moved the height adjustment down to the 17 inch (lowest) today to lessen the nose high attitude by another inch and I have 6+ inches clearance still. The hitch. Like I said before I had a Reese Pro Series 16K slider and it was noisy as hell. Kingpin clunk starting and stopping, creak at every bump and turn. I put the Curt A16 in and took the trailer for a drive with the rear slider window open and heard nothing. Absolutely nothing. No start/stop clunk, no creaking, nothing. Hook up was very easy and the interlaced kingpin jaws make visual check very easy. Operating the slide takes a bit more effort but it worked fine and locked securely. It did not latch back to maneuver and then back again to towing automatically like the video without jostling the handle a little but I am sure it will once broken in and I grease it a bit more. The puck system was easy to adjust and make a solid connection to the truck with no play. I could not be more pleased with the hitch. Cons- The hardware was packaged like one would expect and it was all there but the bolt for the center connection of the slider linkage was different than the handle and passenger side joints. It is too small and caused a lot of play. I used it anyway but it allows play in the handle and not firm for unlatching. I will replaced it today and now it works great. eTrailer is now my go to store for trailering supplies.
2017 F250 curt A16 slider Ford prep package
# 16
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Underbed - 18,000 lbs
This was the best solution for my Dodge RAM 2500 towing my Alliance 340RL 38' 5th Wheel. My son helped me install the rails under the bed and now it is very easy to remove the hitch when I am not using it. It is very strong and I highly recommend this for anyone with a short bed truck.
When you use google chrome it does not move you to the next page to custom fit. So it just tells you your truck shows you the product and I order 6k worth of items without putting in the custom specs that you don't know to hit. Somehow with the info I put in my two other products work but this one doesn't and I have to pay for shipping to this to fix it. Wish if you ordered 6k worth of Items they would be a little more understanding that their site does not walk you what needs to be done and help you fix the problem without charging you more. Prep and Puck systems are two different things now I know.
# 17
Curt A16 5th Wheel Trailer Hitch w/ R16 Slider - Dual Jaw - 16,000 lbs
So far it works great. Only pulled in a short distance and backed it up into my driveway. Make sure you have help lifting this. Very Very heavy. Directions were average but got the job done. Love the extra turning radius on my short bed F250. Make sure all the parts are there. The handle to release the king pin off the hitch was not in the packaging. The box that the hitch and slide came in were all in tacked and looked good. Emailed etrailer and within a few hours they sent were processing the order for the handle. Arrived in 2 days. That's great customer service.
Looks like a received a returned hitch. All my hardware is missing. And still waiting on one box. The sliding rails. Starting off to a bad start.
# 18
B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000 lbs
The shipper’s had issues with the box it wouldn’t fit on their conveyor belts the outside of the box was dinged up pretty good and the other two boxes were together but undamaged the frame took a few dings where it rattled around in the trailer to me.
This B&W 25k 5th wheel hitch is amazing and tuff. So glad I purchased this one from you all. Thanks my Ram 3500 love it. Lol
# 19
B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package - Dual Jaw - 20,000 lbs
Great hitch, super easy to install Stepped up to a 20k hitch for my new truck
The hitch works very well, the only thing I didn't like is one of the handles for the headpiece is welded a little off. It's like this is a factory second. You can see that the one is not parallel.
# 20
B&W Patriot 5th Wheel Trailer Hitch - Dual Jaw - 18,000 lbs
This 5th wheel has exceeded all my expectations. It’s worked flawlessly for thousands of miles and many different type of 5th wheels trailers. Not a peep, B&W FTW!!
So far this has been a great hitch. Takes up a lot less space than the massive auto slider hitch that I had previously, and have had no problem with any sharp turns so far. It is also much easier to handle by myself taking it out of the truck. The only thing I’ve had some problems with is getting the handle lock pin out once I’m ready to disconnect. To solve, I’ve started wedging the flat part of my crowbar under the head of the pin and tapping it with a rubber mallet from underneath.
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."