Most Popular 7500 lbs TW for 2020 Ram 2500

Followed the instructions and it worked correctly on my 2020 Chevy 2500 HD. It fit perfectly. I may have missed it but it would be helpful if they told you what socket and drill bit you would need. I had to make a couple runs to the hardware store to pickup a 15/16" socket and then a 11/16" drill bit for the safety chain holes. I used the Irwin Unibit step drill bit instead of the 11/16" drill bit. That worked really well. Drilling the 4" hole was a bit freaky but it matched perfectly following their instructions. I had to add almost a 1/4" for the spray bed liner to their short bed dimensions. As long as you leave a little play in the bolts underneath, their is room for error within 1/8 to a 1/4" in the hole drilling so don't worry as I did. Definitely helps to have a second person to hold the center piece up while you attach the bolts. I tried by myself and it was very difficult with the weight of the centerpiece on one arm. No issues though installing it. I just used my ramps to get the back end up higher and definitely will have to remove the spare tire. Tip: The key to unlock the spare tire is inside the key remote.

The easiest i ever installed.

Thank you for your prompt service! Product was just as described!

Installed easy came esrly

The easiest i ever installed.

Relatively easy install. The lever could use a bit more engineering to improve its function.

Followed the instructions and it worked correctly on my 2020 Chevy 2500 HD. It fit perfectly. I may have missed it but it would be helpful if they told you what socket and drill bit you would need. I had to make a couple runs to the hardware store to pickup a 15/16" socket and then a 11/16" drill bit for the safety chain holes. I used the Irwin Unibit step drill bit instead of the 11/16" drill bit. That worked really well. Drilling the 4" hole was a bit freaky but it matched perfectly following their instructions. I had to add almost a 1/4" for the spray bed liner to their short bed dimensions. As long as you leave a little play in the bolts underneath, their is room for error within 1/8 to a 1/4" in the hole drilling so don't worry as I did. Definitely helps to have a second person to hold the center piece up while you attach the bolts. I tried by myself and it was very difficult with the weight of the centerpiece on one arm. No issues though installing it. I just used my ramps to get the back end up higher and definitely will have to remove the spare tire. Tip: The key to unlock the spare tire is inside the key remote.

The easiest i ever installed.

Followed the instructions and it worked correctly on my 2020 Chevy 2500 HD. It fit perfectly. I may have missed it but it would be helpful if they told you what socket and drill bit you would need. I had to make a couple runs to the hardware store to pickup a 15/16" socket and then a 11/16" drill bit for the safety chain holes. I used the Irwin Unibit step drill bit instead of the 11/16" drill bit. That worked really well. Drilling the 4" hole was a bit freaky but it matched perfectly following their instructions. I had to add almost a 1/4" for the spray bed liner to their short bed dimensions. As long as you leave a little play in the bolts underneath, their is room for error within 1/8 to a 1/4" in the hole drilling so don't worry as I did. Definitely helps to have a second person to hold the center piece up while you attach the bolts. I tried by myself and it was very difficult with the weight of the centerpiece on one arm. No issues though installing it. I just used my ramps to get the back end up higher and definitely will have to remove the spare tire. Tip: The key to unlock the spare tire is inside the key remote.

The easiest i ever installed.

Followed the instructions and it worked correctly on my 2020 Chevy 2500 HD. It fit perfectly. I may have missed it but it would be helpful if they told you what socket and drill bit you would need. I had to make a couple runs to the hardware store to pickup a 15/16" socket and then a 11/16" drill bit for the safety chain holes. I used the Irwin Unibit step drill bit instead of the 11/16" drill bit. That worked really well. Drilling the 4" hole was a bit freaky but it matched perfectly following their instructions. I had to add almost a 1/4" for the spray bed liner to their short bed dimensions. As long as you leave a little play in the bolts underneath, their is room for error within 1/8 to a 1/4" in the hole drilling so don't worry as I did. Definitely helps to have a second person to hold the center piece up while you attach the bolts. I tried by myself and it was very difficult with the weight of the centerpiece on one arm. No issues though installing it. I just used my ramps to get the back end up higher and definitely will have to remove the spare tire. Tip: The key to unlock the spare tire is inside the key remote.

The easiest i ever installed.

Missing hardware took 2 weeks to get new hardware and it was the wrong hardware so I had to go spend extra money and aggravation to buy my own hardware that should have came in the kit

Easy to put in and after a year I’ve had no issues.

Followed the instructions and it worked correctly on my 2020 Chevy 2500 HD. It fit perfectly. I may have missed it but it would be helpful if they told you what socket and drill bit you would need. I had to make a couple runs to the hardware store to pickup a 15/16" socket and then a 11/16" drill bit for the safety chain holes. I used the Irwin Unibit step drill bit instead of the 11/16" drill bit. That worked really well. Drilling the 4" hole was a bit freaky but it matched perfectly following their instructions. I had to add almost a 1/4" for the spray bed liner to their short bed dimensions. As long as you leave a little play in the bolts underneath, their is room for error within 1/8 to a 1/4" in the hole drilling so don't worry as I did. Definitely helps to have a second person to hold the center piece up while you attach the bolts. I tried by myself and it was very difficult with the weight of the centerpiece on one arm. No issues though installing it. I just used my ramps to get the back end up higher and definitely will have to remove the spare tire. Tip: The key to unlock the spare tire is inside the key remote.

The easiest i ever installed.

Good hitch easy install just had to loosen the bed bolts to fish the nut plates above the frame other than that pretty straight forward

Click to Enlarge

I haven’t pulled with it yet, but installation went well and it it a strong and well made item.

Click to Enlarge

Followed the instructions and it worked correctly on my 2020 Chevy 2500 HD. It fit perfectly. I may have missed it but it would be helpful if they told you what socket and drill bit you would need. I had to make a couple runs to the hardware store to pickup a 15/16" socket and then a 11/16" drill bit for the safety chain holes. I used the Irwin Unibit step drill bit instead of the 11/16" drill bit. That worked really well. Drilling the 4" hole was a bit freaky but it matched perfectly following their instructions. I had to add almost a 1/4" for the spray bed liner to their short bed dimensions. As long as you leave a little play in the bolts underneath, their is room for error within 1/8 to a 1/4" in the hole drilling so don't worry as I did. Definitely helps to have a second person to hold the center piece up while you attach the bolts. I tried by myself and it was very difficult with the weight of the centerpiece on one arm. No issues though installing it. I just used my ramps to get the back end up higher and definitely will have to remove the spare tire. Tip: The key to unlock the spare tire is inside the key remote.

The easiest i ever installed.

Perfect fit, can’t wait to hook up the gooseneck trailer

Hitch was as promised. Installed by myself and fit perfect in a 2018 2500 HD Chevy. I lost a u-bolt spring during installation and CURT replaced it free of charge. etrailer employees were great and hitch was delivered quick. I highly recommend etrailer, CURT and this hitch.

I like the hitch but when ai am pulling my trailers, and I am moving them around at low speeds it seems that there is a good amount of movement in the hitch and the feel in the truck. I’m not sure what that is but I have used trucks that didn’t have that feel in them but mine definitely does. We followed all directions and torqued all bolts to the required amount. Maybe someone can shed some light on what that maybe. Thanks

Followed the instructions and it worked correctly on my 2020 Chevy 2500 HD. It fit perfectly. I may have missed it but it would be helpful if they told you what socket and drill bit you would need. I had to make a couple runs to the hardware store to pickup a 15/16" socket and then a 11/16" drill bit for the safety chain holes. I used the Irwin Unibit step drill bit instead of the 11/16" drill bit. That worked really well. Drilling the 4" hole was a bit freaky but it matched perfectly following their instructions. I had to add almost a 1/4" for the spray bed liner to their short bed dimensions. As long as you leave a little play in the bolts underneath, their is room for error within 1/8 to a 1/4" in the hole drilling so don't worry as I did. Definitely helps to have a second person to hold the center piece up while you attach the bolts. I tried by myself and it was very difficult with the weight of the centerpiece on one arm. No issues though installing it. I just used my ramps to get the back end up higher and definitely will have to remove the spare tire. Tip: The key to unlock the spare tire is inside the key remote.

The easiest i ever installed.

Followed the instructions and it worked correctly on my 2020 Chevy 2500 HD. It fit perfectly. I may have missed it but it would be helpful if they told you what socket and drill bit you would need. I had to make a couple runs to the hardware store to pickup a 15/16" socket and then a 11/16" drill bit for the safety chain holes. I used the Irwin Unibit step drill bit instead of the 11/16" drill bit. That worked really well. Drilling the 4" hole was a bit freaky but it matched perfectly following their instructions. I had to add almost a 1/4" for the spray bed liner to their short bed dimensions. As long as you leave a little play in the bolts underneath, their is room for error within 1/8 to a 1/4" in the hole drilling so don't worry as I did. Definitely helps to have a second person to hold the center piece up while you attach the bolts. I tried by myself and it was very difficult with the weight of the centerpiece on one arm. No issues though installing it. I just used my ramps to get the back end up higher and definitely will have to remove the spare tire. Tip: The key to unlock the spare tire is inside the key remote.

The easiest i ever installed.

Hitch was as promised. Installed by myself and fit perfect in a 2018 2500 HD Chevy. I lost a u-bolt spring during installation and CURT replaced it free of charge. etrailer employees were great and hitch was delivered quick. I highly recommend etrailer, CURT and this hitch.

EASY FAST INSTALLATION

Followed the instructions and it worked correctly on my 2020 Chevy 2500 HD. It fit perfectly. I may have missed it but it would be helpful if they told you what socket and drill bit you would need. I had to make a couple runs to the hardware store to pickup a 15/16" socket and then a 11/16" drill bit for the safety chain holes. I used the Irwin Unibit step drill bit instead of the 11/16" drill bit. That worked really well. Drilling the 4" hole was a bit freaky but it matched perfectly following their instructions. I had to add almost a 1/4" for the spray bed liner to their short bed dimensions. As long as you leave a little play in the bolts underneath, their is room for error within 1/8 to a 1/4" in the hole drilling so don't worry as I did. Definitely helps to have a second person to hold the center piece up while you attach the bolts. I tried by myself and it was very difficult with the weight of the centerpiece on one arm. No issues though installing it. I just used my ramps to get the back end up higher and definitely will have to remove the spare tire. Tip: The key to unlock the spare tire is inside the key remote.

The easiest i ever installed.

Followed the instructions and it worked correctly on my 2020 Chevy 2500 HD. It fit perfectly. I may have missed it but it would be helpful if they told you what socket and drill bit you would need. I had to make a couple runs to the hardware store to pickup a 15/16" socket and then a 11/16" drill bit for the safety chain holes. I used the Irwin Unibit step drill bit instead of the 11/16" drill bit. That worked really well. Drilling the 4" hole was a bit freaky but it matched perfectly following their instructions. I had to add almost a 1/4" for the spray bed liner to their short bed dimensions. As long as you leave a little play in the bolts underneath, their is room for error within 1/8 to a 1/4" in the hole drilling so don't worry as I did. Definitely helps to have a second person to hold the center piece up while you attach the bolts. I tried by myself and it was very difficult with the weight of the centerpiece on one arm. No issues though installing it. I just used my ramps to get the back end up higher and definitely will have to remove the spare tire. Tip: The key to unlock the spare tire is inside the key remote.

The easiest i ever installed.

Hitch was as promised. Installed by myself and fit perfect in a 2018 2500 HD Chevy. I lost a u-bolt spring during installation and CURT replaced it free of charge. etrailer employees were great and hitch was delivered quick. I highly recommend etrailer, CURT and this hitch.

Unit installed and pulled my fifth wheel to provincetowne Mass. Unhooked and pulled the ball out and picked up some firewood. Nice flat surface. Love it. Only way to go.

Followed the instructions and it worked correctly on my 2020 Chevy 2500 HD. It fit perfectly. I may have missed it but it would be helpful if they told you what socket and drill bit you would need. I had to make a couple runs to the hardware store to pickup a 15/16" socket and then a 11/16" drill bit for the safety chain holes. I used the Irwin Unibit step drill bit instead of the 11/16" drill bit. That worked really well. Drilling the 4" hole was a bit freaky but it matched perfectly following their instructions. I had to add almost a 1/4" for the spray bed liner to their short bed dimensions. As long as you leave a little play in the bolts underneath, their is room for error within 1/8 to a 1/4" in the hole drilling so don't worry as I did. Definitely helps to have a second person to hold the center piece up while you attach the bolts. I tried by myself and it was very difficult with the weight of the centerpiece on one arm. No issues though installing it. I just used my ramps to get the back end up higher and definitely will have to remove the spare tire. Tip: The key to unlock the spare tire is inside the key remote.

The easiest i ever installed.

Always a great purchase with this company!

Well made hitch. Item was delivered in a timely manner and well packaged. Couldn’t be happier. Thanks