# 1
24x60 Reese Cargo Carrier for 2" Hitches - Steel - 500 lbs
I received the cargo carrier in great condition and put together in 1.5 hrs. Instruction easy to follow. Fits excellent on 2008 Jeep and good clearance from spare tire. Was worried about that.
# 2
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
We needed this to replace the spare tire carrier on our R-pod180 so that we could carry our Generac iQ2000 generator and a 18 gallon "turd tank". Assembly was straightforward and the product appears to be well made. We chose this particular item because it was fairly light in weight and fit in the R-pod's 1-1/4" receiver. I would recommend this product.
I ordered the Curt, 60x24x6 hitch carrier. It arrived in two days. It's pretty burly and as advertised. Can't wait to start using it.
# 3
20x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
Installation: Easy Assembly: Easy Attached to: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # C13163 Use: Camping equipment. Cooler, Chairs, Sleeping bags, firewood, etc. Like: The fact that it folds is a huge positive. What I would change: perhaps adding a ring or two on the sides to allow for bungee cords or rope. Because the hitch is already a bit low on the 2017 Mitsubishi Outlander (stock wheels, tires, suspension) the back part of the basket can bottom out rather easily. It has nothing to do with the carrier itself though. I would definitely recommend this product! I'm going to use it again in a month for our next camping trip.
This carrier was super easy to assemble. It is a bit heavy but I was able to mount it onto my hitch alone. I’m using an anti-rattle lock and they work great together.
# 4
GearSpace 34 Enclosed Cargo Carrier for 2" Hitch - Slide Out - 34 cu ft - 300 lbs - Dark Gray
We looked all over for a hardshell storage pod, one that would fit 300 pounds of embroidery hardware. This one from Gearspace fit the bill. Super easy checkout with etrailer.com, and they were the only ones to offer free shipping, and since this is a larger, heavier item, that means LTL Freight. Not [online vendor] and not the Mfg. The GearSpace 34 arrived earlier than promised, and it was an easy unload if you have room for a sixty foot tractor trailer. 190 lbs on a pallet, but it will load right into the back of a pickup real easy. Took about 30 minutes to install, and it went like a breeze. Light test, check... signals, check. Ready to roll on our next RV trip, with lots more room for goodies along the way. This item gets an A+, it works as advertised, and etrailer.com was GREAT. They communicate often and update on order status. even sent out an email to get customer feedback and review, along with some pictures. I'm sure after this stellar review they will send me a nice etrailer hat & Koozie Pictures show the Gearspace 34 loaded with about 200 lbs right now. It never moved an inch and is solid on the mounting hitch hardware. You will not be disappointed with this product, it's top of the line for RV rear storage.
The gear space was delivered assembled; it took m15 minutes to attach mount into receiver and secure. My wife and I were able to lift onto mount with no problems. Looks great on the back of our Renegafe Vienna. An excellent solution to additional storage for full time Rv.
# 5
24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs
I’m totally psyched this came earlier than expected. We are going on a trip next weekend with our Jeep Wrangler to Barnstable Beach out in Cape Cod. It took maybe half hour 45 minimum to put together and was very easy. After assembling of course I had to see how it fit and couldn’t be any happier it is perfect. I have an oversized tire and had concerns of it fitting past the spare tire but thankfully Etrailer has the measurements online and I took measurement prior to ordering. I just have one problem my spare tire is big so it doesn’t let the rack fold up enough to allow pin in to secure it in the upward position but I can easily modify and drill the hole a little bigger, I literally need 1/8 - 1/16 of an inch to get pin in. I guess I could try letting air out of spare tire that may work. I can’t wait to try it out it will definitely make a huge difference in packing up the Jeep. Thank you etrailer for the speedy delivery and and the great information about the product online. It’s great to have good info prior to purchasing.
Works great easy to use
# 6
20 x 59 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs
We needed this to replace the spare tire carrier on our R-pod180 so that we could carry our Generac iQ2000 generator and a 18 gallon "turd tank". Assembly was straightforward and the product appears to be well made. We chose this particular item because it was fairly light in weight and fit in the R-pod's 1-1/4" receiver. I would recommend this product.
I ordered the Curt, 60x24x6 hitch carrier. It arrived in two days. It's pretty burly and as advertised. Can't wait to start using it.
# 7
24x60 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs
I ordered the Curt, 60x24x6 hitch carrier. It arrived in two days. It's pretty burly and as advertised. Can't wait to start using it.
We needed this to replace the spare tire carrier on our R-pod180 so that we could carry our Generac iQ2000 generator and a 18 gallon "turd tank". Assembly was straightforward and the product appears to be well made. We chose this particular item because it was fairly light in weight and fit in the R-pod's 1-1/4" receiver. I would recommend this product.
# 8
20x48 Reese Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
Well built - Great price and value - All pieces fit perfectly - No rattles when driving highways/county roads
# 9
GearDeck 17 Enclosed Cargo Carrier for 2" Hitches - Slide Out - 17 cu ft - 420 lbs - Black
Perfect sized box for carry sized luggage and softball game day gear. Proven space saver. Receiver is showing signs of rust otherwise would be a ten. Would buy again.
The cargo carrier generally performed as intended, but it took a lot of tinkering and a warranty replacement of the lid to complete things to our satisfaction. On delivery we found that both two aluminum side stiffeners had been bent during shipment, and were replaced fairly quickly. We then found excessive play in the fit with the receiver, and it was impossible to accommodate a "noise reduction clamp" properly at the hitch, so I used part of a bent aluminum stiffener to apply pressure across the connection between the receiver and the hitch. And lastly, the lid section was warped by over 1", which still kept rain out, but did not keep fine dust out, and it was very unsightly. After a bit of discussion, a replacement lid was provided at no cost, which I have not yet had the chance to inspect as it was delivered to our Arizona home over the summer, and we spend the summer in Canada.
# 10
23x59 Stromberg Carlson Cargo Carrier for 2" Hitches - Steel - 500 lbs
A good size and very strong. I like the fact that it has a grated bottom, as opposed to a few bars like many of its competitors. There are many holes and notches present for any customization desired. Also makes for a great chair to relax. I also ordered the anti-rattle pin so as to fasten this tightly to the hitch. IMO that should be included with any of these trailer-hitch-Mount accessories.
Exceeded delivery time, and came well packaged & undamaged. High quality & high value. I would recommend a purchase to
# 11
19x60 Curt Cargo Carrier for 2" Hitches - Aluminum - Folding - 500 lbs
Purchased this 1 year ago. Worked awesome for a 9.000 mile cross country trip with three off road adventures at geology tour road Joshua tree, west side road Death Valley, and kingman wash lake mead. No rattle, always secure, great clearance. Would purchase again.
It works, but I only put two electric bikes on it. The mesh seems to bend pretty easy.
# 12
32x48 Reese Solo Cargo Carrier for 2" Hitches - Steel - 400 lbs
Product is awesome. Only thing better was the logistics behind it. I ordered it, it was packaged for shipping the same day and I received it within a week. For a product this large and heavy that is amazing, to boot there was no shipping charges for me. Great product, great service.
I received the package in a pretty rough exterior condition but everything was fine inside. The previous comments about having to cut away the expanded metal flooring in order to install the carriage bolts wasn't true in my case. Apparently, this quality control issue has been addressed by the manufacturer. Assembly went well and wasn't complicated. A different carriage bolt with a longer square shoulder should be used. The shoulder doesn't grip too well to the square cutout in the frame and even while pressing firmly on the head of the bolt, it wanted to turn as I was tightening the nut. All in all, it seems to be a solid product and I look forward to using it.
# 13
Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 77" Long - 500 lbs
I can't say I'm entirely happy with my purchase. The instructions were more confusing than helpful. Note in "instruction.jpg" photo of STEP 1 that the text says to put the 8 small bolts in from the inside first, but the drawing clearly shows them as going in from the outside. The last step says to place the ramp onto the receiver as shown.... glad I didn't throw away the box because there is no drawing that shows ramp installation. Actually, the photo on the box was more helpful than any of the instructions. Also, I need to make a trip to the hardware store to buy longer medium bolts because the ones that came with the carrier were not long enough to fully engage the self locking feature of the nylon lock nuts. At a minimum a couple of threads should protrude beyond the nylon. See photo "nut.jpg". The bolt threads don't reach the end of the nylon, so the self locking feature is not fully engaged. I did tighten the nut, but that was as far as it would go. I think once I get back from the hardware store with the new medium bolts and after I reverse the 8 small bolts (I followed the drawing and not the text of the instructions), I'll be OK with the carrier.
"Instantly Get Rid of Wobble and Upgrade With Lights" This is not a 5 because ramp should be longer & there should be some type stabilizer to temporary hold bike while strapping down, I'd pay more for those upgrades. The wobble can instantly be solved by hooking Tie-Straps closest to vehicle directly to the receiver where you hook your chains, rather than hooking them to the provided holes on carrier itself. You of course use the provided strap holes ones on the opposite side. When strapped down as stated, the carrier now becomes one with the vehicle & @ 80mph there is no wobble. (*TIP: Put ramp back in its place before strapping down or else it won't fit with the strap hooks in the way.) I upgraded mine with lights for both safety reasons & not needing the Police any reason to pull me over. It was very simple and cost me nothing but time & maybe $50. I recommend this product whole heartedly.
What our customers are saying:
"I just wanted to let you guys know how great I think your website is. I am a very handy guy, but was weary about installing an electric brake controller on my 2001 F150. That changed after viewing the excellent instructions and pictures on your site! Thanks a bunch, Tim"