Best 2018 Toyota 4Runner Trailer Suspension Parts

This product did exactly what we needed it to. Bought a replacement axle from Dexter but it created clearance issues in the wheel wells. After installing this kit we have much more clearance and the trailer rides like a dream.

Outstanding product. I am so grateful the install video was added to the page. I am a hands on individual and struggle reading directions with numerous steps at times and it made it so much easier to install this. The explanation of how the mount has to sit flush with the axle seat once you tighten down the spacers was very helpful during the alignment stage. I still have to weld the brackets to the axle for extra support as recommended but I did notice that I will be gaining roughly 4” of clearance height to my trailer. This will allow me to sit more evenly with my lifted truck and get my trailer in my driveway easier since I have a water drainage built in to the entrance way with a big dip.

New suspension parts made a real difference in trailer handling. Original shackles holes were severely elongated, spring eye mounts were also needing attention. Thank you, etrailer for the needed parts and support.

These parts were a perfect replacement for my old rusted u bolts. I would recommend buying flat and lock washers to place on the u bolts under the nuts due to the holes in the plates being big enough that the nuts get a little torn up when you tighten them, also the nuts it came with aren't lock nuts.

Excellent products are only sold through e-trailer. I trust them and will continue to purchase through them for all my trailer needs. Thanks!

Looked under my trailer and the u bolts and plates wer rusted away, it's an old trailer so I had no details like make or model number. Called and talked to Kelly S. She was very knowledgeable and overly efficient! Got my parts super fast, the u bolts wrer very thick and the plates were even thicker. Quality parts at a good price. Would highly recommend and a big thanks to Kelly

I have received significant support from e-trailer over the past 10 days as I have made several purchases for a new axle, springs, and hangars for my utility trailer. William and others have went out of their way to assist. I have been very satisfied with all products received. I will post another review when the trailer is completed.

Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.

Excellent, had everything I needed and more for my trailer. Everything fit well!

I bought a axle, springs wheels, hubs etc. to build a utility trailer, I inadvertently had ordered incompatible hubs for the selected axle the person filling the order noticed this and contacted customer service to alert them of the issue who then called me to correct the problem. This saved me the time and expense of returning the part and delaying the project. great service, attentive, knowledgeable employees and great products. Thanks E trailer.

This trailer sees some use off pavement. The added ground clearance provided by the kit is very helpful. The lifting blocks are well constructed and the hardware is high quality. Installation was straightforward, but great care must be taken when lifting the trailer off the ground to remove the axles and also to ensure that the new fasteners are tightened properly. Not a job for inexperienced mechanics.

This kit arrived packaged very well and exactly as described. Inventory of included parts complete. It will be a straight forward job to install and solve my problem of having the trailer too low at the rear since I can't lower my hitch any further. I recently replaced both 20 year old Dexter #10 Torflex axles with 10 deg down vs 0 deg down spindles. I am glad for the improved ride instead of basically a solid axle, but still needed this kit to solve the angle of the trailer because I'm as low as I can go with my weight distribution hitch at the ball.

All parts fit my rebuild of new springs for my 1999 Bear trailer that my G3 Bassboat sat on for 26 yrs(used a lot for fishing on weekends)

Direct replacement, good quality

Not a trailer, but... We needed a set of shocks for a three-wheeled motorcycle truck conversion for our resort/farm in upper Thailand. I had to pack it in my luggage for the trip over. The vehicle came with no shocks on the back axle and the ride was really bad. This kit, with a bit of modification, really did the job and the ride is now significantly better in terms of smoothness and handling. Shocks were a bit long, but it worked out OK.

The second bottom plate isn't correct. The u bolt don't fit the plate. I need a replacement part. The u bolts need to be longer also. I received this item over a week ago and was able to work on this Saturday and when unboxing the items, I noticed the difference is size of bottom shock plate bolt pattern was wrong. Please send me the correct item and I'll send this defective item back. Thank you

Excellent service and prices. Needed to replace curved equalizer, shackles and bolts, nylon spring bushings, u-bolts, and wheel bearing seals on my sailboat trailer. etrailer had everything and shipped it fast. Staff at etrailer was excellent!

These were just what we needed for repairs on our 1983 stock trailer. The old parts were quite worn. We gave the trailer a face lift as well, and it should last another 37 years.

Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!

Worked great fit was good. I did not use standard nuts furnished but used Nylon lock nuts instead.

Perfect fit for the 2020 Geopro 19FD with the 3500# torflex axle. This resolves the issues with bottoming out on any road ramp angles and the ultra low tank discharge ports. The parts are really well made and the installation is simple. Be prepared for the 150 ft-lbs of torque on those bolts. (Always use a torque wrench!)

Straightforward instructions, only had to extend wires on my 2022 E-pro bunkhouse. Follow the instructions to the T and it’ll take a handful of hours. I’ve lifted a jeep and two trucks, so have lowered axels before, this was a piece of cake. Had to also adjust my equalizer hitch but after having two busted pipes from traveling, hoping this keeps them away from those deep potholes. Only time will tell! I installed on my own and love the result! Before and after lift pictures attached.

great product

Just had these installed on our 30' Airstream Globetrotter and it looks great. The extra lift gives us the ability to explore more BLM areas and boondocking opportunities.

The package arrived with a tear and the hardware bag busted so a washer was missing. Contacted trailer and they sent out a replacement right away.

These nests are kind of hard to get wrong really. I welded them into position, haven’t thought about them since. So,… I mean,… that’s good right?

I havent really gotten a chance to use the trailer much since my purchase of the leaf springs. But they went on perfect and the stance is perfect. With a weight load , they should be just right.

So glad I stumbled on these. Perfect fit for early Jeep CJ’s with 1.75” wide leaf springs . Saved me hours of cutting, welding, drilling to make my own.n

Perfect for installing updated axle in my 54 Chevy 3100. Thanks for the quality product and quick service.

Arrived well packed and as advertised. I'm going to pull the azle out of the boat trailer and wanted to have this 'on hand' should I break some of my U bolts. I've bought from you before - always been happy, thanks

Product and service are excellent. You should consider using better shipping containers or using a different shipper. My box showed up with a hole in the bottom and the tape ripped almost gave way. By reading other comments this is not the first time.

Got these parts quickly and was able to rebuild my trailers entire suspension before hauling a car on a 1000 mile weekend road trip. Very glad I found E-trailer.

New leaf springs, heavy duty Dexter hardware and U-bolts. Everything fit like a charm and fairly easy to install. Also, etrailer support was awesome! Super helpful.

We purchased these parts for a custom build trailer for hauling heavy tool boxes over steep grades. Since completion of the build about a year ago, we have been using it and put a lot of miles on it. The hydraulic surge brake system makes it worry free. We can tow it behind different vehicles of differing weights and wheel bases and not worry about setting trailer braking, it is very nice. We will continue to use E-trailer for our trailer needs.

Always what you need and what is delivered!!!

Purchased replacement springs, equalizers, shackles and all the needed hardware to put it all together for my tandem axle boat trailer. While I was trying to figure out all the parts I needed on-line, I made a couple calls to etrailer's customer service and they were awesome! Parts arrived quickly and are exactly what I needed. I put together one of the spring / equalizer / spring set-ups and placed it on the trailer frame to confirm fit. Perfect! Looking forward to swapping all the parts out this weekend. And I'll be shopping with etrailer again soon to get a trailer hitch for my new Durango! Thanks etrailer!

Other than cotter pin is way too small and had to add a couple washers so castle nut reached keeper hole a great product at a good price.

I am rebuilding my tandem axle utility trailer and the center shackle bolts were rusted tight. Upon removing them, they were also badly worn. I went into my local auto parts store and they didn't carry nor could they get through their suppliers the replacement size. Only place I could find the 3/4" zerked bolt was eTrailer.com. I ordered two, they arrived quickly and were the exact size I needed. They installed easily and are working great!