# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Needed to pull a 5x8 trailer with a 22 forester. This ball mount had the perfect rise to brink the hitch ball to 18 & 3/4” at the center of the ball.
# 2
Curt Class II Drawbar - 3/8" Rise, 1" Drop - 7-13/16" Long - 3,500 lbs
The hitch works great and it was delivered FAST. I was very happy with the purchase. It was cake to install.
Great service, very prompt, with good customer contact and follow-up.
# 3
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Just submitted a review. You guys always do a great job - thank you!
It looks tiny compared to other hitches, but is solid metal. The welds are fine and fits like it should. A necessary item for the trailer hitch.
# 4
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
I purchased a Curt class II hitch for my wifes subaru. I recieved it right away and the installation was a breeze. There was a simple little piece of two sided tape missing from the light wire kit. I called etrailer and George sent it to me that day. Service after the sale is what makes a good company great. I couldn't be happier. Thanks alot etrailer!
This trailer hitch was easy to install. I am eighty six years and a disabled Vet. I took my time and had it on in one and half hours. I also installed the heat deflector back on. I think this heat deflector should be reinstalled as the muffler creates a lot of heat. Saved a lot of money also as the dealer here wanted $500.00 for the hitch $60.00 for the wiring and half day to install. Thought he had a sucker but I didn't bite. Thanks much George J
# 5
Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K
Just submitted a review. You guys always do a great job - thank you!
Every Item I have ordered from etrailer.com has been top of the line . Easy ordering , prompt service , and excellent installment instructions . I watch the video , more than once , and follow the expert's direction . I wouldnt order trailer parts anywhere else . Thank You
# 6
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
This got installed on my wife's Forester and we have used it several times for pulling a utility trailer and also for pulling our dock and raft at our camp. Very happy with the options it offers for moving more than fits in the car. Since the Forester had the dual exhaust, i did cheat and have my mechanic do the install. He did it within the hour that is advertised, but did say it would have been a bit of a challenge working at ground level. I think I still ended up paying less in total than going to a hitch installer overall, very happy with the hitch, wiring harness, and drawbar. It's especially nice to have the harness tucked away, as it doesn't get used that often.
Item was as stated and fit receiver perfectly. I used this to get my 30 year old tilt bed trailer to the correct height for my Subaru, as I no longer have a pickup truck.
# 7
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Needed to pull a 5x8 trailer with a 22 forester. This ball mount had the perfect rise to brink the hitch ball to 18 & 3/4” at the center of the ball.
# 8
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
Just submitted a review. You guys always do a great job - thank you!
GREAT PRODUCT, FITS MY CAR PERFECT.
# 9
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
Well made, heavy duty hitch. Fit the Curt hitch on my 2007 Forester perfectly.
# 10
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
Just submitted a review. You guys always do a great job - thank you!
This drawbar was clearly used. See the picture. I asked etrailer about it and sent this picture but the person that replied, Noah, thought it must have been bumped around in shipping. If shipping caused this much damage, it's a poor quality product. If it was, in fact, used, then etrailer lied to me. Either way...not good.
# 11
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
Just submitted a review. You guys always do a great job - thank you!
# 12
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
Item shipped fast and exactly as described. No hesitation in ordering again from this company. Thanks.
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
# 13
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Needed something to raise the hitch carrier on our subaru forester to clear the tailpipes. This was the ticket. Super fast shipping from etrailer and curt makes a sturdy, well finished product.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 14
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
Just submitted a review. You guys always do a great job - thank you!
I installed the trailer wiring and a friend helped install the hitch. Etrailer website is excellent. I got the right items on time and the fit is better than my wife’s dealer installed hitch. Videos on the etrailer site are clear and correct. One caveat, don’t try installing the hitch without at least one other person and having a way to lift the car(we used ramps) is a great help. The only possible way etrailer could be any more helpful is if they could recruit some local shops that would be willing to do the installation. I especially like having my wiring in the passenger compartment when not in use. It keeps it out of the Salt here in the northeast.
# 15
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 16
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
This got installed on my wife's Forester and we have used it several times for pulling a utility trailer and also for pulling our dock and raft at our camp. Very happy with the options it offers for moving more than fits in the car. Since the Forester had the dual exhaust, i did cheat and have my mechanic do the install. He did it within the hour that is advertised, but did say it would have been a bit of a challenge working at ground level. I think I still ended up paying less in total than going to a hitch installer overall, very happy with the hitch, wiring harness, and drawbar. It's especially nice to have the harness tucked away, as it doesn't get used that often.
# 17
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Really slick package with frame, 2 inch tongue and wiring harness. All fit perfect and the end results look great. Pretty amazing how simple and easy it was. This hitch went on my new 2018 Subaru Forester. If you order the wiring harness recommend you also get the 4 way tester.
Good quality! Exactly how it was described.
# 18
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Really slick package with frame, 2 inch tongue and wiring harness. All fit perfect and the end results look great. Pretty amazing how simple and easy it was. This hitch went on my new 2018 Subaru Forester. If you order the wiring harness recommend you also get the 4 way tester.
Good quality! Exactly how it was described.
# 19
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Just submitted a review. You guys always do a great job - thank you!
I installed the trailer wiring and a friend helped install the hitch. Etrailer website is excellent. I got the right items on time and the fit is better than my wife’s dealer installed hitch. Videos on the etrailer site are clear and correct. One caveat, don’t try installing the hitch without at least one other person and having a way to lift the car(we used ramps) is a great help. The only possible way etrailer could be any more helpful is if they could recruit some local shops that would be willing to do the installation. I especially like having my wiring in the passenger compartment when not in use. It keeps it out of the Salt here in the northeast.
# 20
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
What our customers are saying:
"very easy to shop"