# 1
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
A little loose, noise but does the job.
Product was packaged well and item was as described. Very well made and very happy with purchase! Thank you etrailer!!
# 2
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
A little loose, noise but does the job.
The tow hitch on my daily driver (Kia Soul) is much lower than our other tow vehicle (1926 model T) Using this hitch allows us to tow with the trailer near level. Only important because it's a super light weight teardrop. It is not set up with a landing leg or levelers. So the trailer can only be used when hitched to a vehicle. It's two pieces of steel welded together with two holes drilled in it. As long as it doesn't fall apart it's excellent. E-trailer shipped quickly, no hassles! Sometimes it's not the product. It's the seller.
# 3
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
A little loose, noise but does the job.
I over measured my new trailer so there is a tilt to the trailer, I needed a 3" lift and ordered a 5" lift thinking i need the maximum by guessing , the trailer was level. Use a level if you want a level trailer. I,m a pinhead. Great product, they didn't know that I was a pinhead when I ordered so they sent me very quickly what i asked for. MEASURE MEASURE MEASURE
# 4
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
The item I ordered came in fast and was exactly as described. I will use them again.
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system. Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect. Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
# 5
Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
it is pretty and it is work well. thank
It isbthe right size and helps with the height difference to make the trailer more even with the back end of my Accord.
# 6
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 4-5/8" Rise - 3,500 lbs
it is pretty and it is work well. thank
Perfect for my Honda Fit as it has a low carriage, the Euro shape gave me a few extra inches to tow a small trailer across the country from Oregon to North Carolina with no issues.
# 7
Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
it is pretty and it is work well. thank
Incorrectly listed on etrailers as a 3-1/8” rise, when really this is a 5-1/8” rise (marked correctly on the item itself, but listed incorrectly on this website).
# 8
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
This is an excellent product. The packaging was superior as I had 6 other items shipped at the same time. Everything secured in one box so no rattling around or damage. The instructional video made everything easy to understand. When I came to a dead end I reviewed the video, picked up what I had missed and proceeded right along. Highly recommend.
Excellent product. Fits perfectly and securely.
# 9
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 3-1/8" Rise - 3,500 lbs
it is pretty and it is work well. thank
Service from eTrailer was great, they even wrote to ensure I got the order correct when I ordered a different size hitch cover than the drawbar that I ordered. Picture attached of the somewhat unique application for the Euro style setup I’m using – I’m dragging my race tires to racing events with my 750HP Cobra!
# 10
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
# 11
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
A little loose, noise but does the job.
I ordered a hitch and wiring kit for my 2010 Kia soul.ordering was easy and it was delivered when they said it would .got in my shop that evening and installed both on my car .it was easy and really didn't take that long and saved me a bunch of money .if I would have bought it locally it would have cost me several hundred dollars more.good prices
# 12
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
A little loose, noise but does the job.
The tow hitch on my daily driver (Kia Soul) is much lower than our other tow vehicle (1926 model T) Using this hitch allows us to tow with the trailer near level. Only important because it's a super light weight teardrop. It is not set up with a landing leg or levelers. So the trailer can only be used when hitched to a vehicle. It's two pieces of steel welded together with two holes drilled in it. As long as it doesn't fall apart it's excellent. E-trailer shipped quickly, no hassles! Sometimes it's not the product. It's the seller.
# 13
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
A little loose, noise but does the job.
The tow hitch on my daily driver (Kia Soul) is much lower than our other tow vehicle (1926 model T) Using this hitch allows us to tow with the trailer near level. Only important because it's a super light weight teardrop. It is not set up with a landing leg or levelers. So the trailer can only be used when hitched to a vehicle. It's two pieces of steel welded together with two holes drilled in it. As long as it doesn't fall apart it's excellent. E-trailer shipped quickly, no hassles! Sometimes it's not the product. It's the seller.
# 14
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.
Product is exactly as described on the etrailer.com website and measurements and dimensions fit perfect. Easy phone order process and prompt delivery, standard shipping arrived 3 business days after the order was placed. The extra long version of the ball mount makes it perfect for me to put on the bike rack while towing my horses.
# 15
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
This is an excellent product. The packaging was superior as I had 6 other items shipped at the same time. Everything secured in one box so no rattling around or damage. The instructional video made everything easy to understand. When I came to a dead end I reviewed the video, picked up what I had missed and proceeded right along. Highly recommend.
Excellent product. Fits perfectly and securely.
# 16
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
This is an excellent product. The packaging was superior as I had 6 other items shipped at the same time. Everything secured in one box so no rattling around or damage. The instructional video made everything easy to understand. When I came to a dead end I reviewed the video, picked up what I had missed and proceeded right along. Highly recommend.
Excellent product. Fits perfectly and securely.
# 17
Curt Class II Drawbar - 3-1/8" Rise - 9-1/2" Long - 3,500 lbs
A little loose, noise but does the job.
The tow hitch on my daily driver (Kia Soul) is much lower than our other tow vehicle (1926 model T) Using this hitch allows us to tow with the trailer near level. Only important because it's a super light weight teardrop. It is not set up with a landing leg or levelers. So the trailer can only be used when hitched to a vehicle. It's two pieces of steel welded together with two holes drilled in it. As long as it doesn't fall apart it's excellent. E-trailer shipped quickly, no hassles! Sometimes it's not the product. It's the seller.
# 18
Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount - 7" Rise to 9-1/2" Drop - 5,000 lbs
We bought this to tow our 3,000 lbs. boat with our Subaru Ascent with a 5,000 lbs. towing capacity. With the OEM ball mount, we could really feel every jolt and jiggle from hard stops, going over bumps in the road, and trailering down dirt roads. However, the dual cushion ball has really improved our trailing experience. Once we get up to speed, we hardly notice we are towing our boat. It's also great because some of the lakes we visit are down dirt roads, and the cushion makes this a much more pleasant experience. I would highly recommend this to anyone towing a boat or larger trailer with a SUV as it maintains that comfortable ride and the jostling of the trailer is much less noticeable.
Rusted within 30 days. The manufacturer refused to warranty the product. I have continued to use it, but it has required some serious rust mitigation and is a flawed product.
# 19
Curt Class III Drawbar - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
A little loose, noise but does the job.
The tow hitch on my daily driver (Kia Soul) is much lower than our other tow vehicle (1926 model T) Using this hitch allows us to tow with the trailer near level. Only important because it's a super light weight teardrop. It is not set up with a landing leg or levelers. So the trailer can only be used when hitched to a vehicle. It's two pieces of steel welded together with two holes drilled in it. As long as it doesn't fall apart it's excellent. E-trailer shipped quickly, no hassles! Sometimes it's not the product. It's the seller.
# 20
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
This extreme rise ball mount is what I need to make my passenger car into a back-up trailer puller. It is well built and has a welded strut to reinforce the long rise/drop ball mount. The "shock damper" feature is sure to help absorb the leverage movement that a rise/drop ball mount passes on to the hitch receiver itself.
What our customers are saying:
"Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair."