# 1
Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 6K to 8K
Looked at another brand, decided I liked the Lippert better. Although it was $[XX] more than where I started I was willing to pay the extra due to it having a variable width and it being heavier built than the product I was looking at. Paula was excellent in assisting me with this product, (4) springs, u bolts, wet blots / shackle kit.
These will be going back. Lippert did a terrible job prepping these for shipment. They showed up with evidence of metallic grinding, dropping, and less than a quality piece. The bubble wrap that was around the pieces wouldn’t protect a Christmas ornament from the dollar tree. Definitely not going on my trailer like this.
# 2
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 6,000 lbs
etrailer support staff gets 5 stars. However... The kit I received was incomplete. Bushings were missing, two shackle links and a shackle link assembly were missing. Additionally, one of the shackle link assemblies would not accept its' mating link - the bolt shafts were spread apart. one of the equalizer assemblies did not have that gold anodize coating, another had incomplete anodize coating. see pic. etrailer staff shipped me the bushings and the shackle link assemblies to complete my project. As for the finish, POR 15 gloss black is a lovely color. The issue here is with Dexter, not etrailer
Missing parts - Missing two shackle links and eight backing plates… please overnight missing parts as I am stranded and unable to leave…
# 3
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
We broke down on a Saturday near Cincinnati and couldn't find any parts, so I called etrailer and luckily they had a wet bolt kit in stock. They shipped it next day, which means business day, next day, aka Tuesday " thanks UPS ". I had the kit installed by a mobile mechanic and I was back on the road by 3:30pm.
Had to replace the axles and decided while there, just do the whole suspension too. Got the axles directly from Dexter but purchased the suspension kit from etrailer. Replacing the equalizer was the easiest part of this project and if I didn't have to replace the axles, probably would have had it done in under 2 hours. Time will tell how well it rides and the tires wear.
# 4
Dexter Trailer Springs Over-Under Conversion Kit
Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.
Great conversion kit, easy to get the plates lined up perfectly. I welded the new saddles onto the axle and welded the nuts to the bolts so there is zero chance of anything moving. Having the plates held in perfect position while welding made it simple. Solved the "dragging wheels problem" without having to cut off and reweld the fenders (which had been welded without enough clearance to the tires at the factory.)
# 5
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
Order received was missing significant pieces as per my notification to customer service. Looks like all parts, nuts bolts flanges were all packed loose in the box, UPS destroyed the package and reboxed, resulting in missing items. Attached picture is what I received.
Parts r good quality fit good would order from trailer again
# 6
Road Armor Shock Absorbing Equalizer Kit - Tandem Axle - Qty 2
Installed these with the Dexter Bronze Bushings and Lippert AP wet bolt kit. No more clanking and banging from the trailer going down the road and especially making tight turns.
I would give these equalizers 5 stars for performance but due to packaging I will drop them to a 4 star. Our trailer tows considerably better after installing these. After a bump, the trailer smooths out without the chucking that I was used to. Packaging wise, the bolts from one equalizer marred the powder coated finish of the other in transit.
# 7
Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
Worked great, paint is holding up, hardware was good quality, bolted right in…no issues, hold load at least as good as factory springs. Would recommend and buy again!!
Not only were the parts the right parts the kit had all I needed to do it right the videos made it as easy as it could be. The right parts that work and good videos on how to do it. I did call to be sure I was ordering everything I was going to need and was given great advise and was not encouraged to get things that I did not need. They are my go to team to get anything trailer done.
# 8
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
We installed the kit on a home-built 25' gooseneck trailer that we were converting from 2 axles to 3. This kit, along with new leaf springs on all 3 axles, went on with no issues, and it has been running strong with no problems since the installation. We've put quite a bit of weight on the trailer between logs, lumber, tractors, and equipment, and there have been no issues so far. It was great to have everything we needed, (other than springs), in one kit! And etrailer has always been good about fast delivery, easy purchasing, and great updates on status. Things have gone so smoothly that we have never had to contact Customer Service, so I can't comment on how they do!
I ordered this kit for a trailer that I bought as scrap iron to haul logs so I wouldn't tear up my good trailer. The first load I broke 3 shackles and 2 equalizers. I looked at parts and found this kit at a great price to rebuild my suspension. I had it within 3 days of the time I ordered, And the service was great!! The best part....... when I got the box I thought they knew me personally and had already seen the trailer I was working on, Redneck Trailer Parts LOL. I plan on getting rid of the redneck dually setup with a different set of axles and get rid of the trailer house wheels and make it into a gooseneck. I will for sure get all my parts from Etrailer.com for the rest of this project and any other trailer parts I need. VERY VERY pleased with the parts, service and fast shipping!!
# 9
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
These hangers are great for the center. They provide just enough clearance for your equalizer. Because of the length and being that I am a welder I added a support inside the hanger to keep them rigid!
Megan was very helpful with helping get this order together and communicating with parts being shipped from other locations. Thank you so very much Megan!!!!
# 10
Equalizer for 1-3/4" Wide Double-Eye Springs - 6-3/4" Long - 9/16" Center Hole
Fit was great and replacement went smoothly.
The equalizers fit great, and the pin holes are the correct size to accept bronze bushings! I have found that some other places sell equalizers with oversize holes that will not hold bronze bushings. I appreciate you selling good parts that are made properly !
# 11
Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt Hole
Perfect fit, welded to frame of fifth wheel trailer without any issues and has made the trip to Tucson and back home about 3500 miles without breaking. So far so good
Product was received expeditiously. Product is as advertised. Thank you.
# 12
MORryde Premium Rubber Suspension Kit for Triple Axle Trailers w/ Correct Track - 35" Wheelbase
One of the equalizers (SRE4000) failed after less than 500 miles. Had to go through MorRyde and they sent me replacements and stated that the SRE4000 has been replaced by AllTrek4000 (which is the replacements they sent. They are also cheaper than what I bought but they would not refund the difference or the labor I had to pay to the the SRE4000’s installed. I ended up installing the AllTrek 4000’s in the campground while I was on vacation due to the failure.
Kit looks awesome and can already tell the difference on the suspension while driving or the train tracks on my way home.
# 13
Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front
Worked for what I needed. No issues so far.
These are the lippert brackets, I bought for spares just in case I was to break one in travels. Alsome product.
# 14
MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
Ordered these a few days ago ,arrived as scheduled , was surprised by the ease of installing the MORryde Shock Absorbing Equalizers, along with their shackle upgrade kit. Time will tell!!
Shipped in a timely manner, parts were packaged good and delivered undamaged. Looking forward to install soon as MoRryde CRE 3000 looks much more heavy duty than what was originally installed by Grand Design.
# 15
Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
Got the kit today. Some of the nuts were oval and would not fit on the bolt of course. Now I have to go to box store and find nuts that fit! Not very good quality control!!
After all of the bad weather I was able to finish installing my new suspension system on my 1992 Lance Fifth Wheel. The task was much easier than I had anticipated. The instructional video you provide access to were a big help. Other than having to grind off a nut or two I had no difficulties (See attached photos). The 'list' that had developed on the fifth wheel is now resolved, and towing has already proven to be better.
# 16
MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K
These equalizers should be standard on all trailers. Improved the ride tremendously and is a stouter product than the original equalizers that came on the trailer.
After taking off my Equa flex and seeing the cracked welds and the complete junk that they produce, the MORryde 3000 is built extremely well 100% better. The wett bolt kit is definitely a must have! I’m so glad I noticed the cracked welds around the bolts and housing when my trailer was parked at home versus on the road. Calling etrailer for tech-support and making sure I had all the measurements right was super easy and their customer service is superior. I highly recommend etrailer!
What our customers are saying:
"Excellent service both on the phone asking for information and the web. Look forward to recieving the item.... Thanks"