Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front
(49 reviews)
Price: $51.95
In Stock
Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front
Item # H248
Our Price: $51.95
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (49)
- Q & A (0)
- Photos
Redline Trailer Leaf Spring Suspension - H248
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 3-1/4 Inch Tall
- Tandem Axle
- Redline
Hangers suspend leaf springs from the frame of your tandem-axle trailer. Designed to be used with equalizer kit AP233. Front and rear hangers are 3-1/4" tall. Center hangers are 3-5/8" tall.
Features:
- Attach 4 leaf springs (sold separately) to your trailer frame
- Use table below to determine hanger location (when used with AP233) based on type of leaf springs
- Achieve 4-1/2" or 5" clearance between trailer frame and axle, depending on axle size
- Include:
- (4) 3-1/4" Tall front and rear hangers (28-5)
- (2) 3-5/8" Tall center hangers (29-31)
- Use in conjunction with AP233 for complete kit
- AP233 includes equalizers, bolts and shackle straps
- Designed for use on trailers with tandem, 2,000-lb to 7,000-lb axles
- Do not include components for mounting axle to springs
| Leaf Springs | A - Distance Between Front and Center Hangers | B - Distance Between Center and Rear Hangers | C - Distance Between U-Bolts | D - Distance Between Center of Axle and Trailer Frame | Axle Diameter |
|---|---|---|---|---|---|
| 1020 | 25" | 25" | 29" | 5" | 1-3/4" (typical 2,000-lb trailer axle) |
| PR722, PR3, PR4, PR4B, PR5, PR6 | 29-1/2" | 29-1/2" | 34" | 4-1/2" | 2-3/8" (typical 3,500-lb trailer axle) |
H248 Tandem Axle Hanger Kit - 1.75" Double Eye Springs - 2,000 lbs to 7,000 lbs
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- etrailer mistake
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front - H248
Average Customer Rating: 5.0 out of 5 stars (49 Customer Reviews)
Hangers suspend leaf springs from the frame of your tandem-axle trailer. Designed to be used with equalizer kit AP233. Front and rear hangers are 3-1/4" tall. Center hangers are 3-5/8" tall.by: Timothy 02/09/2023
These are the lippert brackets, I bought for spares just in case I was to break one in travels. Alsome product.
by: Edward07/01/2023
Thank you for quick delivery
by: Matt W. 06/26/2014
Rebuilding a 1995 Escort tandem axle boat trailer for a 24` Trophy. If anyone is rebuilding one, you know aftermarket parts are impossible to find as they are bolt on hangers. Had to slot out one of the holes on each bracket (didn't use equalizer bracket) to make it work and coated with galvanized spray paint. Did the trick but haven't reassembled suspension yet as parts are being sourced from 5 different companies.
by: Tom B09/27/2022
The items arrived in a timely manner. The hangers are exactly the same as the original hangers that are still on the trailer. Now to cut the old one off and have one of our certified welders weld the new one back on.
by: Terry 03/15/2023
Great business on time and reasonable prices
by: Shackle Hangers09/07/2015
Product was as advertised. I did have to modify the center one as I was unaware there are high/low equalizers. I ended up drilling a new hole and it worked fine. 10/10.
by: Connie 12/06/2021
Excellent for moving the springs towards the rear as we lengthened the frame and need to correct the spring location.
by: Ray M.10/30/2013
Came in a timely fashion,working out quite well! Not done w/ trailer, will be ordering more parts. Great job!
by: Robert 09/30/2020
These brackets are thicker than the ones I originally put on my trailer.Stronger is better,
highly recommend these.Planing on building another trailer and will get these again.
by: Jim s06/10/2017
Thanks etrailer, I received my order all the parts were there, can't wait to install them on my trailer. good price ,heavy duty, I will let you know more after I install the parts. Thanks again for your excellent service.
by: Brian06/01/2022
My order was handled perfectly. It was shipped immediately and arrived on time. I had work set up reliant on this shipment and we able to move forward on our schedule. Thanks to everyone!!
by: John 01/09/2020
Great product, way better than what came off the trailer. Super fast free shipping.
by: Aaron Nelson11/05/2014
High quality hangers fast shipping awesome company to work with and very knowledgeable
by: Michael06/14/2022
Worked great.
by: Budhead06/03/2014
Fantastic service, great prices, this is the place.
by: john b04/01/2017
good stuff everything went together fine will be doing business with your company in the near future
by: Ray S10/07/2020
One year and multiple uses still holding up like day 1.
by: Mark 06/03/2020
Good product and price . Shipping was great got it a few days early
by: Mike b 12/31/2016
Very easy to view and purchase Nice tech sheets attached to catalog item on website. I would definitely use agIn
Thanks Mike
by: Dave 07/14/2021
They are exactly what I needed. They arrived faster than I thought they would.
by: Robert D10/18/2014
Once again great service and great product. Thanks
by: Brian 01/21/2021
excellent
by: Pete C09/12/2016
Order was processed and shipped very fa st!
by: Don D08/06/2013
Fast service, just like the product description, very good quality.
by: Larry05/31/2018
Excellent
25
49
Show More Reviews
See what our Experts say about this Redline Trailer Leaf Spring Suspension
- How to Raise Trailer Suspension When Springs are Above AxleThe best way to get additional lift at this point would be to go with taller hangers on your trailer. Increasing the length of your shackle straps won't give you a level lift since it would only increase the one side of the axle. Going with taller hangers will raise both sides of where the axle mounts. You will want to measure the length of your current hangers and then check out the link I attached that has all of the hangers we offer and go with ones taller than what you have.
view full answer... - Will Taller Leaf Spring Hangers Increase 5th Wheel Trailer HeightIf your trailer's axles already have an axle over-under kit (also called a flip kit) and you want additional height to allow the hitched trailer to be level the other option is installation of taller leaf spring hangers. We sell hanger kits like # H248 as well as individual hangers that you can see by clicking on the link provided.
view full answer... - Changing Spring Hangers To Raise Or Lower A TrailerYes. If you change no other components, the hanger length increase should directly correspond to the lift of the trailer. So, if you use a tandem axle kit like the Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front # H248, and each hanger is 1-1/2 inches longer than your current corresponding hangers, you will lift your trailer by 1-1/2 inches. This would work the same way for lowering a trailer.
view full answer... - What Is The Tallest Leaf Spring Hanger Kit We Offer?The tallest Leaf Spring Hanger Kit we offer is the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center # APT4 which uses 3-1/4" tall front and rear hangers, and 5-7/16" center hangers. The included equalizers are 6-1/4" long, and the included shackles are 2-5/8" long. The hangers will need to be welded to the frame of your trailer by a qualified welder. If you can tell me what the weight rating of your axle is I would be happy to recommend the correct...
view full answer... - Height of Equalizers Included in Tandem-Axle Trailer Hanger Kit # AP233-H248Yes, the equalizers included in the Tandem-Axle Trailer Hanger Kit # AP233-H248 measure 2 inches tall (from eye hole to eye hole on center). I have attached a diagram to assist.
view full answer...
- Recommended Equalizer Kit For 5,000 lb Axles On Tandem Axle TrailerThe Tandem-Axle Trailer Equalizer Kit for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long # AP233 is designed for use on trailers with tandem, 2,000-lb to 7,000-lb axles. This means it is rated for systems with up to a total weight of 14,000 lbs. This will be a kit that absolutely can be used for your tandem 5,000 lb axles. You may also want to consider the Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front # H248 if you don't have hangers for your system yet.
view full answer... - Thickness of the Steel Used in the Trailer Hanger part # 28-5The thickness of the steel of the Hanger part # 28-5 is 3/16 of an inch thick. The only way to get 6 of these exact hangers is to order a quantity of 6 of them. The # H248 comes with a set of taller center hangers. Center hangers are taller because of the shackle straps that hold the springs to the equalizer call for the center hanger to be taller so that the spring ends up sitting level. I attached a picture that hopefully let's you visualize that.
view full answer...
- Trailer Leaf Springs Feel Too Bouncy On Single Axle TrailerThe issue with the leaf springs being too bouncy could be caused by a few different things. The first is that they are not properly rated for the weight of the trailer, they are worn down too far, or the trailer is being overloaded. Furthermore, a trailer can feel bouncy while unloaded as well. If you want to replace the leaf springs to try and remedy the situation then I will need to know the length from eye to eye while unloaded. If you don't want to replace the leaf springs you can add...
view full answer...
- Replacement Leaf Spring Hanger For Lippert AxleI believe we may have a suitable option for you. The Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs # H248 is designed to fit 1-3/4" wide springs, and the front and rear springs are 3-1/4" tall, while the center hangers are 3-5/8" tall.
view full answer...
- Recommended Lift Kit for 2007 Keystone Springdale Fifth Wheel Trailer With Flipped AxlesFor your 2007 Keystone Springdale 5th wheel trailer I recommend the Lippert Components Tandem Axle Lift Kit # RR23QX to give you 2 inches of lift at your hangers. If you need more lift than this, then you will need to measure your current hangers to determine the additional lift needed. I've linked the page to all our hanger options for you. That will require cutting your current hangers off and welding on new ones. The hangers have button weld/plug weld locations to hold them in place...
view full answer... - Tandem Axle Hanger Kit Recommendation that has 5-3/4 inch Center HangersFor a trailer suspension kit that comes with 5-3/4 inch equalizers you would want the part # AP233-H248 instead of the # APT5. Aside from that and the center hangers being slightly different to accommodate the different equalizers the kits are the same.
view full answer... - Lifting a Square Axle Trailer The over under conversion kits like item # K71-384-00 you referenced only work on round axles. To lift your square axle trailer, I recommend replacing the leaf spring hangers with longer ones. The Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front item # H248 would be a great option. You will want to measure the length of your current hangers and then check out the link I attached that has all of our hangers. Once you decide how much of a lift you are looking...
view full answer... - Hanger Kit for Tandem Axle Trailer that Needs More Wheel ClearanceSince you said your tires were rubbing I would go with a hanger setup that is a little taller like the part # AP233-H248 which has 3-1/4 inch front/rear hangers and 3-5/8 inch center. Also, while the 60/40 rule for axle placement is a great starting point it's no the end-all-be-all for placement. The best location for the axles will be where the weight of the trailer will have it's tongue weight as 10-15 percent of the total trailer weight.
view full answer... - Square Axle Trailer Lift Option For A 2013 Jayco SwiftAll of our over-under conversion kits, like the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 that you mentioned, is only available for round axles. To lift your square axle trailer, I recommend installing longer leaf spring hangers. A great choice is the: -Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs # H248. You'll want to measure the length of your existing hangers first, and check out the attached link to all of our hangers to pick out the needed hangers.
view full answer... - Trailer Suspension Kit and 6 Inch Long Equalizers for Tandem Axles and Double Eye SpringsSuspension kit # APT4 for tandem axles with double eye springs has 6-1/4 inch long equalizers so it is a possible option for you. Kit # AP233-H248 uses 5-3/4 inch long equalizers. But if you have to have equalizer # TREQ310 then the individual parts will have to be pieced together since there isn't a kit with that equalizer. If you go that route then you would also need: 8 of # 18-11GALV 14 of # 166081 1 of # H248 (or other hangers, see link)
view full answer... - Hanger Spacing for 3500 LB. Tandem Axle TrailerThank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs # e64SR with the # AP233 Equalizer Kit and the # H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and 29-1/2" between the center and rear hangers. This should achieve a 4-1/2" clearance between the center of the axle and the trailer frame if you have a 3500 lb axle. I've Provided a diagram that should be helpful. I've also provided a link to our trailer...
view full answer...
- Recommended Suspension Kit For A 2022 Forest River WolfpackWhen it comes to replacing equalizers on your 2022 Forest River Wolfpack, I recommend The Suspension Kit for Tandem-Axle Trailers - 1-3/4 inch Wide Double Eye Springs - 2-1/4 inch Links # AP233. This will replace your existing 5-3/4 inch center hole to center hole equalizer. The kit works with 1-3/4 inch wide double-eye springs. The Tandem-Axle Trailer Hangers # H248 are sold separately. This hanger kit is designed for use on trailers with tandem 2,000 pound to 7,000 pound axles. I...
view full answer... - Recommended Equalizers & Hangers for Use with Leaf Spring e54SRBased on your measurements the 5-3/4-inch Trailer Equalizer Kit # AP233 is appropriate for use with 3500-lb-rated leaf springs # e54SR. The equalizer kit can be used along with tandem-axle hanger kit # H248.
view full answer... - Can Trailer Axle Leaf Spring e22YR Install on Overslung and Underslung AxleThere is a pin or bolt head/locator on the top and bottom of the etrailer leaf spring part # e22YR that you referenced so you can install it on a over slung or under slung trailer axle setup.
view full answer... - Are Longer Shackle Straps Available to Replace the Ones In Trailer Suspension Hanger Kit AP233-H248The shackles including with trailer suspension hanger kit # AP233-H248 are 2-1/4 inches long measured from the center of one hole to the center of the other. The overall length is 3-1/2 inches. The longest shackles we have are 3-1/2 inches long (measuring between the holes on center) at 4-3/4 inches long overall, # TRSL350. I have included a link to the shackle straps we carry. There are several lengths available. If you just need the shackle straps and equalizers you could get them separately...
view full answer... - Spare Leaf Springs, Shackle Kit, and Spring Hangers for a 2019 Grand Design Reflection 303RLSSince your 2019 Grand Design Reflection 303RLS has 5,200 lbs Dexter axles you will most likely have 25-1/4" long double eyed leaf springs. You will want to measure to confirm but if this is what your 5th wheel currently has you will want the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long item # e34SR as spares. The MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps item # MR46ZR will work well with these leaf springs but you will again...
view full answer... - Hanger Kit With Leaf Springs For Mounting Tandem Axle Trailer Suspension for 2" Square 3500LB AxlesOn our page for the Tandem-Axle Trailer Hanger Kit # AP233-H248 we will have a diagram for the hanger measurements when using four of the Springs # e54SR. You will need the CE Smith U-Bolt Kit # CE23103 to attach your 2" square axles.
view full answer... - Replacing Leaf Spring Recommendation for a 2004 Weekend Warrior Super Lite FK 2100Since you have dual axles you will split the overall capacity of your trailer between the two axles. So you would not want a double eye leaf spring set for 8,000 lbs even if we made one because that would be way overkill for your setup. The closest spring sets that we offer would be the 4-Leaf Double-Eye Spring # SP-218275. This spring has an axle capacity of 4,800 lbs, so when you double that because of your dual axle setup you end up with a capacity of 9,600 lbs which is more than the...
view full answer... - Correct Hanger Spacing for 5-Leaf Double-Eye Spring # e34SRThe correct hangers that you need to use for the 5-Leaf Double-Eye Spring # e34SR and the Dexter Heavy-Duty Suspension Kit # K71-359-00 come in the Kit # H248. For your application these need to be spaced 29-1/2" apart on center. I have attached a diagram that demonstrates this for you. The leaf spring that you will be using is refereed to as "PR5" in the table.
view full answer...
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Aaron N.
11/7/2015
Awesome