Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt Hole
(28 reviews)
Price: $21.33
In Stock
Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt Hole
Item # 29-31
Our Price: $21.33
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (28)
- Q & A (0)
- Videos (1)
- Photos
Redline Trailer Leaf Spring Suspension - 29-31
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 3-5/8 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- 9/16 Inch Diameter
- Redline
Hanger can be configured to work in the front, rear or center position to suspend your double-eye leaf spring or equalizer.
Features:
- Configured for use as front, center or rear hanger
- Provides attachment point for leaf springs
- Hanger suspends spring or equalizer from trailer frame
- Fits 1-3/4" wide double-eye springs with 9/16" diameter eyes
- Works with 9/16" diameter bolt (sold separately)
Specs:
- Overall dimensions: 4-1/4" tall x 2-3/8" wide x 3" deep
- Inside width: 1-7/8"
29-31 Front, Center or Rear Hanger for Double Eye Springs - 3-5/8" Tall - 9/16" Bolt Hole
Video of Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt Hole
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Trailer Suspension - Leaf Spring Suspension - 29-31 Review
Today we're gonna take a look at the Front or Center or Rear Hanger for Double-Eye Springs. It's 3 5/8 inches tall and has a 9/16 diameter bolt hole. This hanger can be configured to work in the front, the rear or the center position to suspend your double-eyed leaf springer equalizer. It provides the attachment point for the leaf springs, and this hanger will suspend your springer equalizer from the trailer frame. It is designed to fit 1 3/4 inch wide double-eye springs with 9/16 diameter eyes. It is designed to work with a 9/16 diameter bolt that we do sell separately on our website, and it's usually listed on this product page as a related project. Now to just give you a few dimensions on this. We're going to measure the overall dimension, so from the very bottom up to the very top.
It's going to be right at 4 1/4 inches tall. The width on it, from side to side, is going to be right at 2 3/8 inches wide, and the total depth is going to be right at 3 inches. When they do size the hangers, they call this one a 3 5/8 inch tall, and basically what they're measuring is from the center of this hole up to the top. If we go center, it's going to be right at 3 5/8 inches tall. Then the inside width on this is going to be right at 1 7/8 inches. That should do it for the review on the Front or Center or Rear Hanger for Double-Eye Spring, 3 5/8 inches tall and with a 9/16 diameter bolt hole..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt Hole - 29-31
Average Customer Rating: 4.9 out of 5 stars (28 Customer Reviews)
Hanger can be configured to work in the front, rear or center position to suspend your double-eye leaf spring or equalizer.by: Bill08/26/2022
Perfect fit, welded to frame of fifth wheel trailer without any issues and has made the trip to Tucson and back home about 3500 miles without breaking. So far so good
by: Rick 02/19/2023
Easy to order. Fast delivery.
by: James R.01/17/2017
Product was received expeditiously.
Product is as advertised.
Thank you.
by: KG12/06/2016
Exactly as described. It just needs to be primed and painted, and then mounted on the trailer. I'm very pleased with the product.
by: John H.04/07/2017
Not installed yet but is just what we need to make the repair to one of our
trailers
by: mike b.03/04/2014
Exactly what I was looking for to upgrade my trailer and really fast shipping.
by: kevin g10/04/2014
both item were exactly what i needed, web site was easy to navigate. in my case inventory was out and had to wait for shipment,but they did a great job by getting them to me when i needed them.
by: Lawrence 09/09/2021
As usual I always get what I ordered. Arrives timely. Quality service and products. Thank you!
by: Don S04/19/2017
as ordered, no problems with parts, just the shipping boondoggle.
by: Michael12/21/2018
Yes happy with my purchase and service thankyou
by: Brett08/11/2018
I have received this product but have not installed it yet
by: Jesse 06/10/2023
by: Ron11/09/2016
The part looked real good. For what is cost, it was much easier to buy that to make it.
by: Matthias09/12/2019
No deformation, good material
by: Tom04/25/2018
Perfect
by: Shane 09/07/2022
by: Michael 02/22/2023
by: Gregg 07/28/2021
Just basic hangers. Good quality.
by: Tom 09/16/2022
by: Michael 09/28/2021
Quick fulfillment and exactly as advert ised
by: 07/14/2021
Just. What I needed to make the repairs
by: Tim01/06/2018
Great service and very reasonable price s...
by: Brad 08/26/2023
by: William 10/13/2021
by: Dustin 01/28/2023
25
28
Show More Reviews
See what our Experts say about this Redline Trailer Leaf Spring Suspension
- 4-1/4 Inch Tall Hanger Needed for 1-3/4 Inch Wide Double Eye Leaf SpringsWe sure do! What you're looking for is the Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall # E4139 which is designed for 1-3/4" wide springs and the standard 9/16" diameter bolt. Attached is a review video for you to check out.
view full answer... - Recommended Hangers and Shackles for Building Tandem 7,500 Pound Axle TrailerI recommend using the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs # K71-359-00. This kit has heavy duty shackles, wet bolts, and also equalizers with built-in grease zerks. This will give you 33" axle spacing. Although there are no heavy duty hangers, I would use longer hangers for additional clearance. You can use the Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole # 28-5 in the front/rear and then the Front/Center/Rear...
view full answer... - How To Fix Tires Hitting Fenders After Installing New Dexter E-Z Flex EqualizersTo get your Dexter E-Z Flex Equalizer lower so the tires on your 2-17 Nitro Z19 boat trailer are not hitting the fenders I recommend having taller center hangers installed. Base on the pictures you provided it looks like your current hangers are pretty short. You will want to measure from the frame to the center of the hole in the hanger, and then use one of the options mentioned below as a replacement to get the clearance back. The available options are the 3-1/4" tall # 28-5, 3-5/8"...
view full answer...
- Increasing Clearance Between Frame and Axle on a Boat TrailerAn unloaded trailer should have between 2 and 2-1/2 inches of clearance between the frame and the axle. Typically trailer leaf springs have a maximum deflection of 1-1/2 inches. First, I recommend checking your leaf springs. If they have some age on them, they may have flattened out and need to be replaced. If you find that your springs are still in good condition, there are a few other routes you could take to give yourself more clearance between the frame and axle. If the axle on your...
view full answer... - Parts Needed To Mount 5,200LB Tandem Axles To a Homemade Car Hauler TrailerTo attach your axles to the the frame of the car hauler you will need the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs # AP233-H248. This kit includes all the hangers, equalizers, shackle straps, shackle bolts and nuts to fit your axles. I have linked an article below that will help you with positioning the axles on your trailer to ensure that you have the correct percentage of tongue weight when towing to be safe. If you would prefer to have an upgraded suspension the Dexter...
view full answer...
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
Installed by:
Jeff D
Updated by:
Adele M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.