1. Trailer Leaf Spring Suspension
  2. etrailer
  3. Hangers
  4. Suspension Kits
  5. Spring Mounting Hardware
  6. Double Eye Springs
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center

Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center

lowest price pledge
Our Price: $100.87
Trailer Leaf Spring Suspension
This item qualifies for Free Shipping
Shipping Weight: 35 lbs
Quantity: 
Trailer Leaf Spring Suspension APTT5 - Hangers,Suspension Kits - etrailer
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Leaf-spring mounting kit includes 3-1/4" tall front, center, and rear hangers, and necessary hardware. Equalizers are 7-3/4" long. Components for mounting axle to springs sold separately. Lowest Prices for the best trailer leaf spring suspension from etrailer. Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center part number APTT5 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (23)
  • Q & A (20)
  • Photos
  • Why etrailer?

etrailer Trailer Leaf Spring Suspension

  • Hangers
  • Suspension Kits
  • Spring Mounting Hardware
  • Double Eye Springs
  • Triple Axle
  • etrailer

Leaf-spring mounting kit includes 3-1/4" tall front, center, and rear hangers, and necessary hardware. Equalizers are 7-3/4" long. Components for mounting axle to springs sold separately.


Features:

  • Attaches 6 leaf springs (sold separately) to your trailer frame
    • Use table below to determine hanger location based on type of leaf springs
  • Achieves 4-1/2" or 5" clearance between trailer frame and axle, depending on axle size
  • Includes:
    • (8) 3-1/4" Tall hangers
    • (4) 7-3/4" Long curved equalizers
    • (16) 2-5/8" Long shackle straps
    • (24) 3" Long x 9/16" diameter shackle bolts
    • (24) 9/16" Diameter locknuts
  • Designed for use on trailers with triple, 2,000-lb to 7,000-lb axles
  • Does not include components for mounting axle to springs



Hanger Locations for Triple Axle

Leaf SpringsA - Distance Between Front and 1st-Center HangersB - Distance Between Center HangersC - Distance Between 2nd-Center and Rear HangersD - Distance Between U-BoltsE - Distance Between Center of Axle and Trailer FrameAxle Diameter
SP-169275 (1020)24-3/4"29"24-3/4"28-1/2"4-1/2"1-3/4"
(typical 2,000-lb trailer axle)
SP-219275 (PR722)
SP-220275 (PR3)
SP-218275 (PR4)
SP-212275 (PR4B)
SP-111275 (PR5)
SP-198275 (PR6)
29-1/2"34"29-1/2"34"5"2-3/8"
(typical 3,500-lb trailer axle)

Note: The above table provides an indication of where the included hangers can be mounted on your trailer. The distance between the hangers may vary depending on your specific application. Be sure to verify proper positioning before welding.



TSW-18 Triple Axle Hanger Kit - 1.75" Double Eye Springs - 2,000 lbs to 7,000 lbs

Replaces APTT5

Item # APTT5






Customer Reviews

Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center - APTT5

Average Customer Rating:  4.9 out of 5 stars   (23 Customer Reviews)

Leaf-spring mounting kit includes 3-1/4" tall front, center, and rear hangers, and necessary hardware. Equalizers are 7-3/4" long. Components for mounting axle to springs sold separately.

- APTT5
by:

Great products and service!! All parts were correct, delivered fast and fit like a glove. Thanks You etrailer.com 599314



- APTT5
by:

My order was on hold fore quite some time so I called and spoke with Lauren and she took good care and found their was only one item holding things up so we canceled that item and she got the remaining order shipped right away. Ask for Lauren if you want it done right! 825048



- APTT5
by:

Steel looks good, I haven’t installed it yet but looks like it’s gonna work good 794297



- APTT5
by:

The bolts and shackle set that I bought worked out wonderful bolted right up no issues had it done in a couple hours thanks so much Etrailer.com 664830


Comments
Very good
Steve - 07/01/2020

84692

- APTT5
by:

Excellent quality. Needed a full triple axle kit. Everything was there. Turned the trailer over and had it put together and welded up in about 4 hrs. Will definitely be ordering more product from this company in the future. 562731



- APTT5
by:

Worked as described. Got my trailer pulling like new. 516828



- APTT5
by:

Great quality. Great price. Went on 22k tri axle gooseneck. Tightened everything right up. Only wish is that the nylon bushings were softer steel aloy for longevity sake. 438114



- APTT5
by:

Did the job repairing our camper just f ine. 437987


Comments
Still working
Camper - 09/30/2018

44165

- APTT5
by:

We installed the kit on a home-built 25' gooseneck trailer that we were converting from 2 axles to 3. This kit, along with new leaf springs on all 3 axles, went on with no issues, and it has been running strong with no problems since the installation. We've put quite a bit of weight on the trailer between logs, lumber, tractors, and equipment, and there have been no issues so far. It was great to have everything we needed, (other than springs), in one kit! And etrailer has always been good about fast delivery, easy purchasing, and great updates on status. Things have gone so smoothly that we have never had to contact Customer Service, so I can't comment on how they do! 320835



- APTT5
by:

EVERYTHING FIT PERFECT. GREAT PRODUCT 293284



- APTT5
by:

Great quality, fit great, great price, fast shipping 209503



- APTT5
by:

We had an old tri-axle that needed work. Overall a good trailer just many road miles and worn parts. With this kit we were able to get it on the road again, with parts that match the job went quickly. The website even offered a diagram for proper spacing of the hangers for the layout. This is only the second time I have used E-trailer, but if they keep up the great service, I can see many years of business helpiong to maintain my fleet of 100+ vehicals. 188177



- APTT5
by:

Parts look great, wont install till later this spring, very fast delivery 176148



- APTT5
by:

Was going to remove and rework old parts but found this kit and at a great price. The order came quickly and the parts are perfect. Highly recommend these parts for your next job! 143911



- APTT5
by:

I purchased this kit to replace my existing suspension on an old equipment trailer. Very happy with the product and the help that I received from Londyn in taking the time to help me find the right set to fit my trailer requirements. A tip for if you are replacing them on a trailer with existing shackles or if you don't want to pull the axles out from underneath the trailer. If you set up the hangers onto a 2x4 you can clamp them into place with the board holding them in place and inline with each other so you can tack weld them to the frame without worrying about them bowing or twisting out of alignment. And it will save you lots of time and frustration. 128336



- APTT5
by:

very good and quick shipping 127364



- APTT5
by:

top notch product at a very good price. Fast delivery and the help sections are very informative. I would recommend this company to everyone 74859



- APTT5
by:

very good product 60584



- APTT5
by:

I ordered this kit for a trailer that I bought as scrap iron to haul logs so I wouldn't tear up my good trailer. The first load I broke 3 shackles and 2 equalizers. I looked at parts and found this kit at a great price to rebuild my suspension. I had it within 3 days of the time I ordered, And the service was great!! The best part....... when I got the box I thought they knew me personally and had already seen the trailer I was working on, Redneck Trailer Parts LOL. I plan on getting rid of the redneck dually setup with a different set of axles and get rid of the trailer house wheels and make it into a gooseneck. I will for sure get all my parts from Etrailer.com for the rest of this project and any other trailer parts I need. VERY VERY pleased with the parts, service and fast shipping!! 39767



- APTT5
by:

Perfect for the dump trailer I am building. Product was shipped fast and in good condition when it arrived. The product is easy to install but it would be nice if they added mounting instructions with the parts. This information is available on their website however and is easy to follow 37601



- APTT5
by:

product worx great and was delivered pr ompty 35394



- APTT5
by:

The bushings in my equalizers were worn out, so I was just going to buy new equalizers, then I decided to buy new bolts also. This kit cost less than the equalizers and bolts so I bought it. I went ahead and used the new shackles, but I now have a set of hangers laying around. It all fit well. I used it with PR4 springs. My existing hangers were already set up with the dimensions shown on the web page for this kit. 31961



- APTT5
by:

good price quick shipping 27210


26
26

Ask the Experts about this etrailer Trailer Leaf Spring Suspension

  • Trailer Axle Over-Under Kit to Raise Height of Trailer
    You can increase trailer height by welding on taller spring hangers but there is also another way to lift a trailer without having to cut off the old hangers and weld on all new ones, an axle over-under kit. Kit # K71-384-00 for 2-3/8-inch diameter axles and kit # K71-385-00 for 3-inch axles are bolt on kits that place your leaf springs above the axles, as shown in the linked photo. The amount of lift you get will be the sum of the axle diameter plus the height of the spring stack. So,...
    view full answer...
  • Do Hangers Need to be Modified or Replaced When Switching to New Equalizers on Trailer
    You shouldn't need to modify the hangers at all on your trailer when going from a straight equalizer like # TREQR2 to Y-shape units like the ones in the Triple Axle Kit # APTT5 that you were looking at. The shackle strap angle will make up for the difference between the two designs. The difference in height between the front/rear hangers and the middle hangers on your triple axle trailer is not uncommon. This is actually the more standard method than using hangers of all the same length....
    view full answer...
  • Triple Axle 5th Wheel Trailer Has Center Axle Forward and Backward Movement
    Some movement is normal. This is because there are two pivot points, one at the second hanger and one at the third hanger which are on either side of the center axle. What you will want to do is check several things to determine if there is wear that is causing excessive movement. Check the shackle straps, equalizers, and hangers to see if the holes have elongated. If so they will need to be replaced. Also make sure the u-bolts are tight and in the correct position and that the nub on...
    view full answer...
  • Triple Axle Boat Trailer Suspension Clearance Problems After Installing New Front Springs
    The first thing I would check on is the capacity of the new springs that you had installed on the trailer. You need to be sure that the spring capacity is rated at 1/2 the axle capacity. That way 2 springs equal the capacity of the trailer axle for proper fit. Check the arch of the springs with a level top of spring to top of spring to tie bolt. Next, check the suspension components on the trailer and make sure there is no damage. The Spring hangers, equalizers or shackle straps could...
    view full answer...
  • Reasons for Different Spacing Between Hangers in Triple Axle Hanger Kit
    The difference in the spacing for the # APTT5 hanger kit comes in to play with the center spring due to the additional components attached at each end of the spring. Both the first spring and last spring have the same spacing since they are each attached to the hanger at one end and the equalizer at the other. The center spring however is attached to two equalizers. Since the center spring doesn't contact a hanger directly, some additional space is needed between the hangers to accommodate...
    view full answer...
  • Distances Between Hangers for Triple Axle Kit when Used with Hanger Kit APTT5
    Yes we do have a chart that shows how to space the axles of a triple axle trailer with a hanger kit like the # APTT5 that you referenced. I attached this chart for you to check out as well. The bottom section of the chart is for use with springs that are 25-1/4 inches in length from spring eye to spring eye. This is most likely what you have. The upper portion is for springs that are 20-3/8 inches.
    view full answer...
  • Torque Specification for Shackle Bolts in Redline Triple-Axle Trailer Hanger Kit
    For the 9/16 inch diameter shackle bolts included in the Redline Triple-Axle Trailer Hanger Kit # APTT5 referenced in your question, you will want 65 to 95 foot pounds of torque. This kit can be used to attach 6 leaf springs to your trailer frame. I have also included a chart that will help you determine the hanger location based on the type of leaf springs you have for your trailer.
    view full answer...
  • Distance Between Hangers When Using Hanger Kit part # APTT5 with 26 inch Long Trailer Leaf Spring
    There aren't holes through the top of the hangers that come with the # APTT5 so there wouldn't be a way to bolt them to your trailer. If the springs you have are 26 inches long you would need to have a distance of 34-3/4 inches between each hanger. Typically this kit is used on 25-1/4 inch springs like the # SP-218275 which then would call for 34 inches between the hangers on center.
    view full answer...
  • Suspension Hanger Kit Recommendation for a Triple Axle Trailer
    The part # APTT5 that you referenced is a triple axle suspension hanger kit that would work well for you. For a spring the part # SP-219275 is a very popular option.
    view full answer...
  • How to Determine if a 108 Triple Axle Fender Would Work with the Hanger Kit part # APTT5
    The distance between the axle centers with the # APTT5 when used with a 25-1/4 inch spring like the # SP-219275 will be 34 inches. You would need to compare that dimension to the dimension of the wheel centers on the fender to see if this kit would fit. Tire size will play into this as well. You will need to consider this also.
    view full answer...
  • Axle Lift and Spring Replacement for Slipper Springs on 1987 Featherlight Gooseneck Stock Trailer
    For your slipper springs there isn't a lift kit available and the over-under kits like # K71-384-00 for 2-3/8 inch diameter axle or # K71-385-00 for a 3 inch axle are not compatible with slipper springs. The equalizers for slipper springs operate differently from double eye spring equalizer so there is more visual play in the slipper equalizers. Since you have slipper springs, you would need to replace the hangers for the additional height desired. I've linked the page to assist.
    view full answer...
  • Recommendation for Adding Third Axle To Trailer Suspension
    The Dexter Heavy Duty Suspension Kit # K71-360-00 is designed for 33 inch axle spacing. To add your third axle, you cannot simply add a hanger spring and axle. You can keep your 35 inch spacing but you will need to relocate your hangers. I've attached an article to help with the proper positioning of your axles. You will need to add another equalizer of the same dimension as you have to each side and then add the same leaf springs and shackle straps as what you currently have....
    view full answer...
  • Correct Hanger Spacing Using Triple-Axle Hanger Kit With 3,500 Lb 25-1/8 Inch Long Leaf Springs
    The correct hanger spacer when using the Triple-Axle Trailer Hanger Kit part # APTT5 with the 4-Leaf Double-Eye Spring part # SP-212275 is 29-1/2" from the front hanger to the center hanger, 34" between the center hangers, and 29-1/2" from the second center hanger to the rear hanger. Please note, you will also need the U-Bolt Kit for Mounting Kit part # APUBR-1 in order to mount the leaf springs to the axle.
    view full answer...
  • Differences Between Triple Axle Hanger Kits APTT1, APTT3, and APTT5
    The differences are the dimensions of the hangers and equalizers of the three kits. The # APTT1 uses totally straight equalizers and taller center hangers. The # APTT3 uses more traditional sized equalizers and center and outside hangers that differ in size slightly. The part # APTT5 uses a standard sized equalizer and hangers that are all the same height. The part # APTT3 is the one that is the most commonly used. It would be my recommendation for your trailer.
    view full answer...
  • Recommended Hanger Spacing for Triple Axle Trailer
    There will be different dimensions between the hangers. From front to back your hangers for that 20-3/8 inch spring like # SP-169275 will be 24-3/4 on center then 29 inches on center and finally 24-3/4 inches on center. This will put each of the 3 axles 28-1/2 inches on center. I've attached a photo to assist. This is all based on 7-3/4 inch curved equalizers and 2-5/8 inch long shackle straps. These are found in the Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4"...
    view full answer...
  • Are Side-Frame Mount Jacks Available With Different Gear Ratios
    There are jacks with different gear ratios but the only one in the 12,000 lb range is the Bulldog 2-Speed Square Jack - Drop Leg w/ Spring Return - 12-1/2" Lift - 12,500 lbs # BD183750. That lift may not be enough so another option if you need more lift is the Bulldog 2-Speed Jack set - Fixed Leg - Traditional - Weld On - 17" Lift - 22,500 lbs # BD500153. Apart from that you may want to check out an electric jack set like the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010...
    view full answer...
  • Does Trailer Suspension 7-3/4 Inch Equalizer EQ-E1 Have a Weight Capacity
    Equalizer # TREQE1 does not have a weight capacity itself. It isn't bearing much of the weight compared to other components in a trailer suspension set up. If you have a tandem axle trailer then you could potentially use kit # APT5, # APT3, # APT9, # APT8, # APT7, or # APT3HD. All of these kits have the 7-3/4 inch long equalizers. For a triple axle trailer you could use # APTT5 or # APTT3. All of the above kits also come with hangers. If you do not need hangers then you would...
    view full answer...
  • Can Triple Axle Hanger kit part # APTT5 be Used on Trailer with 7k Axles
    Yes, the Triple Axle Hanger kit part # APTT5 would work great on your trailer that has 7k axles as it was designed for use on axles up to 7k.
    view full answer...
  • Leaf Spring, U-Bolt Kit, and Hanger Kit Recommendation for Triple Axle Trailer
    For 7,000 lb axles we have the leaf springs part # SP198275 which is a great starting point. You'd need a total of 6 of these. Then for a U-bolt mounting kit for 7k axles we have the part # APUBR-8 which you'd need three of. Then for a triple axle hanger kit you'd need the part # APTT5 and you'd be set.
    view full answer...
  • Recommended Triple Axle Setup for Tiny Home Trailer
    The best trailer axle option we have for your custom tiny home trailer build is going to be the Dexter Trailer Axle w/ Electric Brakes part # 8327864-EB for 7,000 lbs. This axle is top of the line and comes with everything you need for bolt-on installation. It comes with electric brakes, 8 on 6-1/2" hubs, and zerk fittings on the axle for easy maintenance. The hub face to hub face measurement is 94" so once you have wheels and tires on you will be around 8-1/2' wide. I have attached some...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Updated by:
Lindsey S
Updated by:
Alexander C
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.