# 1
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
I purchased this kit for the standard 5' x 8' 2,000 lb. trailer from Lowes. I did an axle flip and added larger tires. This is the perfect kit for this trailer. It went on easy, and the bolts were slightly longer. Also the bolts in this kit were fine thread instead of course thread. Overall an improvemet over the factory hardware and I had no issues. Shipped in a timely manner and packaged well. I highly recommend this kit if you plan on flipping the axle or need a replacement.
Moved my axle below the leaf springs, works a lot better for my needs now. Paul helped me put an order together, got it shipped that day and delivered two days later. Quality parts and outstanding customer service.
# 2
2" Square Trailer U-Bolt (Qty 2)
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!
# 3
Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
Parts are a 5, delivery options questionable.Can't delivery 10 pounds of metal in a paper mailer. Was tore open on the bottom. I run a mailing business and I can tell you its not that much more expensive to use a box.
New bolts made replacement of springs easy
# 4
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
My manufactured trailer did not have this type with a grease fitting. They wore out the bushing in no time. I really like the design and ability to lubricate the bushing.
About a year ago, I replaced my leaf springs, dry shackles with wet shackles, upgraded the bushings to brass, and I also installed sumo springs on the trailer,the trailer is very stable on the road, neither wind or semi trucks push the trailer, not that they ever really did but these sumo Springs made it much better. All the plates and things that were loose in the trailer no longer bounce around and are found on the floor at the end of a trip.
# 5
Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
Worked great, paint is holding up, hardware was good quality, bolted right in…no issues, hold load at least as good as factory springs. Would recommend and buy again!!
Not only were the parts the right parts the kit had all I needed to do it right the videos made it as easy as it could be. The right parts that work and good videos on how to do it. I did call to be sure I was ordering everything I was going to need and was given great advise and was not encouraged to get things that I did not need. They are my go to team to get anything trailer done.
# 6
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.
# 7
CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
The u-bolts have stood up pretty well to the elements and strong enough to pull my full 2k pound trailer. So far so good with the zinc protection, hope it lasts as good as other finish options
Fit around axle is good but bolts could stand to be at least an inch longer, only tighten up flush with plate under my 5 leaf springs, could not use lock washers had to use red Loctite.
# 8
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
My 6' x 10' landscape trailer was a homemade by a prior owner. While it was mostly constructed very well, the spring hangers were not correct. The spacing for the springs was also wrong, and it had very little fender clearance. There was also evidence that the spring U-bolts had contacted the frame on occasion. (I do not carry loads anywhere near the 3500# axle rating.) I added an extra set of holes on the front hangers in case the ride height proved to be too much, but I like the way it sits with the stock holes. I don't think I'll be utilizing the extra holes. This kit was just the ticket to increase the suspension travel and fender clearance on my landscape trailer. Now it "sits right"!
Used this kit to get rid of the annoying slip springs on my Harbor Freight trailer. Everything fit nicely and the trailer is makes much less noise. I re-made the base-plate these weld onto with some Angle iron I picked up at Home Depot. (See enclosed pictures) All-in-all I am happy with this suspension kit and would recommend if you are doing a similar project.
# 9
Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
As described and ship quickly.
I had some issues with the part missing from the box in transit. Looked like the poor package had been through the ringer. etrailer shipped another almost immediately. Incredible customer service. Will definitely be buying from them in the future! Part works great. Seems to be really nice quality as well.
# 10
Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
First and foremost, working with etrailer was a pleasure. They were veery helpful in many ways. Secondly, Theproducts I purchased were exactly what I needed. I flipped the axle on my utility trailer in order to beef up the springs and use larger tires. The u-bolt kits were oerfect, and after having the spring seats welded onto the axle the rest of the job went smoothly. All in all 5 out of 5.
# 11
Replacement Shackle Strap - 2-5/8" Long - Galvanized
I ordered and paid 2 day shipping from etrailer, I was told the items were in stock. I placed the order on Thursday. I received 1/2 the order. etrailer decided to wait until Monday to ship the other 1/2 and said that 2 day from is from when we ship. They talk you into faster shipping then sit on the order then say that's 2 day shipping. I'll order elsewhere next time. etrailer are scam artist.
Fit great and easy to install. Seem to be of good quality. No complaints.
# 12
Only received 1. Parts are a 5, delivery options questionable.Can't delivery 10 pounds of metal in a paper mailer. Was tore open on the bottom. I run a mailing business and I can tell you its not that much more expensive to use a box.
My axle was maybe a 1/4" from the bottom of the trailer, so I replaced the 2" shackle with this 3-1/2" and so far so good.
# 13
U-Bolt Plate - 3" Diameter, Round Trailer Axle - 2" Wide Spring - 1/2" Bolts
Exactly as described. Best price I could find and fast shipping
a very well made part with precise dimensions and a quality finish I will recommend your parts and supplies to all I know and will look forward to my future orders
# 14
U-Bolt Plate - 3" Diameter, Round Trailer Axle - 1-3/4" Wide Spring - 1/2" Bolts
worked great during instalation
Just what I needed for my trailer build. I like the fact they are nice and thick (about .20” thick). Remember to prime and paint so they don’t rust out.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."