Most Popular 20000 lbs GTW for 2012 Toyota Tundra

Extremely easy install. You will need a torque wrench that’ll go up to 110 ft/lbs. glad I did my research and went with the B&w gooseneck hitch in anticipation of getting this 5th wheel companion hitch at a later time.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Fast shipping and the box was in perfect condition. I appreciate the amazing customer service. They were friendly and had a good attitude when I called with questions. I look forward to shopping with them in the future. The shipping company called ahead of time and scheduled the delivery because it was such a large item they were friendly and was within their timeframe. Thank you etrailer.com I appreciate it.

Click to Enlarge

I ordered fifth wheel Rails, hitch, a tailgate, and trailer wiring harness for my 2009 Tundra. etrailer provided excellent service and products. Web site pictures, videos and info were superb. In the course of ordering these items I was helped by several staff persons; all of whom were polite, knowledgeable and most helpful. Over several years, etrailer has helped me with a variety of items for a couple of RVs. Always a great experience. They have the eq, they know about it, and they follow through. After my eq is installed, and I have used it, I will review again and send pictures.

We have the Anderson Hitch installed on our 2017 Ford SuperDuty and pull a Reflection 337RLS. We have traveled over 4,000 miles and have been extremely satisfied. The hitch allows plenty of clearance between 5th wheel, bed, and the truck cab. Hook-up and disconnect has always been easy, even with RV lots that were uneven dirt lots. I use Curt thin rubber sound dampeners (item 16900) and this provides a quiet, tight fit between the rails and hitch. Of course the light weight makes it easy to remove when not towing and less weight when you are towing. A great product for the right truck, trailer combination.

Click to Enlarge

Tried to install this on a 2001 Chevy Silverado 3500, dual rear wheel, long bed, 4x4, diesel engine truck. The clamp style mounting simply does not work. The ONLY way I can see this working is by drilling added holes in the frame of the truck at the front end of the side plates. This is because of a bend in the frame at the clamp location. Also at this location the frame is boxed in and any bolt holes will be hidden. Bolts would have to fished in with bolt wires.

Click to Enlarge

I am very pleased with my purchase of the Reese M5, a major improvement over my old receiver. Great service from etrailer as well.

I wanted to be able to easily utilize my truck bed and this hitch provides that in spades! Easy to remove and install. I absolutely have to give a shout out to Paula on customer service. She was amazing! My first shipment was damaged and missing a vital part. Paula had another one shipped right away and made my return shipment a breeze. She stayed in contact with me to the end. I felt like she shared in my joy once the install was complete! The hitch is super adjustable for optimal placement in the bed and height of the trailer. Make a few quick measurements and it just goes together quickly. Love the dual jaw release lever. Our last 5th wheel hitch had the standard pull to release lever and it was often very difficult to operate. This lever style is a game changer. Overall, I couldn't be more pleased with the product and customer service!

Click to Enlarge

Click to Enlarge

I installed this system in my classic square body Silverado after installing the Turnover Ball BK1400 gooseneck hitch. Both work great together and this companion installed beautifully. I tow a 40’ Cougar camper with it.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

6000 miles towing this year; loaded trailer weight 16,480 lbs (based on CAT scale weight tickets). Hitch is awesome. Very secure with no noticeable chucking. I can remove and install this hitch by myself. The two pieces are very manageable. My fifth B&W hitch over the years; 2 turnover ball goosenecks and 2 tow & stows. Quality hitches which I recommend highly.

Click to Enlarge

Very happy with the B&W hitch we received. etrailer and their staff were excellent to work with. Shipping was sooner than projected. And the installation was extremely easy. Would absolutely use etrailer again as well as B&W products. Thank you all!

Click to Enlarge

Click to Enlarge

Click to Enlarge

We have have NO problems with the 5th Wheel Hitch. Thank you for a great product!

This product has worked perfect for me using with my 2012 Wildcat Sterling 5th wheel. Customer service is the best at etrailer.com. Just love doing business with them!

my companion 5th wheel hitch(rvk3370) hitch was delivered on 3/11, I installed it in a couple hours on 3/12. It was a piece of cake, the delivery was made with a lift gate truck that I back my truck up to and had the driver lower the lift gate down onto my tailgate, I unpackaged the hitch and was able to Maneuver it by myself into the puck system on my truck, I have the slider hitch so much heavier than the standard one, but still very easy for my 65 year old body to handle, the B t W was the only hitch I considered because of the ruggedness and quality of their products my truck is a 2023 Ford F 350

Click to Enlarge

Will at eTrailer.com did a great job walking me through the 5th wheel hitch and air lift options that I needed. The B&W Companion Slider Hitch installed like a charm, and looks to be great quality! Nice fit and finish, B&W.

Click to Enlarge

Great Hitch, very happy with this unit. Have pulled the 18K lb fifth wheel over 25K miles (Florida to Idaho, back to Florida and now Alaska). We have covered many rough roads and challenging situations, without problems and have never had a bad couple. The hitch indicator on front of head gives a clear indication of latching condition, and the latch handle has a locking pin for added protection. This pin is the only issue I have had, which can be trapped under the slide plate if your truck is at an angle (beyond about 35 deg) from the rv. I make it a point to pull this pin prior to backing if I am the least bit concerned. This is a great hitch! Excellent quality and it's made here in America.

Click to Enlarge

This is very well built and operates great. Once I got the first rail positioned and mounted, everything else was very easy. The R20 slider came in a single box and was very heavy. The packaging is not suitable for the weight. As others have also reported, the package was completely demolished when it arrived. Thankfully , all the part’s made it okay and nothing was damaged. I love the product.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Works as expected. Installation was almost perfect. I had to do a little physical persuasion on one clip to get it to line up correctly but nothing a big hammer could not fix. But with confidence from a reliable company.

Click to Enlarge

Hitch dropped right in. directions for assembly and installation were perfect. always a pleasure to deal with this company

Love it. Easy to take apart and move! The instructions were very clear on how to assemble. I pull a 43ft camper and have yet to have any problems! Well worth the $$

Click to Enlarge

I have towed with the Curt A20 for a few thousand miles. I really like this hitch. The visual hooked versus unkooked indicator is awesome. It operates flawlessly. I do get some chucking over bridge expansion joints. However, it seems like most people have this problem. On normal roads it pulls great.

Click to Enlarge

I am a new 5th wheel owner, who is also a 52yr old female, so I wanted/needed something that I could understand and easy to take out on my own. I just picked up my 5th wheel and my older 2005 dodge 2500 (8' bed) truck was a hard to find a good fit. I completely recommend this hitch. It has enough adjustments for my truck to tow my 5th wheel level and never once did I have to worry about the truck bed or my back window as this keeps everything up and away. To hook it up was just as easy as I could see everything just like the video shows. Very happy with this purchase.

Great hitch, super easy to install Stepped up to a 20k hitch for my new truck

Click to Enlarge

Click to Enlarge

The hitch works very well, the only thing I didn't like is one of the handles for the headpiece is welded a little off. It's like this is a factory second. You can see that the one is not parallel.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I recently purchased a Reese M5 20K hitch for my new Silverado 3500HD, Crew Cab, 8’ bed. As usual, Etrailer pricing was very good and with free shipping to boot. The hitch arrived via UPS in just a few days after placing the order. Following the detailed instructions provided by Reese, the install into the factory “puck” system, was fairly straight forward. However, a word of caution concerning the install. There are 4 15/16” bolts that need to be torqued to 220-foot pounds and are somewhat difficult to get to. Fortunately, I was able to borrow a torque wrench that would accommodate the recommended foot pounds of torque. Also, you may have an issue if you need to place the hitch at its highest position. The release handle might protrude above the bed rails of your truck in this position. This will be a problem if you have a bed cover. Reese is/was well aware of this issue and sells an after-market handle that will correct this issue. Etrailer lists this handle on their Web page.

Click to Enlarge

Installed in a 2018 GMC 3500 LB SRW Overall it was really easy to put together. Its light enough move in and out and very sturdy. I did not have a clearance issue with the Backflip cover regarding the stock handle. See pics. Just a heads up, I had an issue with the threading in the legs, etrailer was very understanding and sent me out replacements supper fast. I contacted Reese regarding paint guncked up in the threading and they were aware of the issue, they recommended running a wire brush or a tap to clean it out.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Install was decent. Haven't pulled with it yet, so we shall se3

Click to Enlarge

Very impressed with the quality and performance of this product

Click to Enlarge

Click to Enlarge

Click to Enlarge

The hitch works great, easy to hook-up and is very quiet while pulling. My only complaint is that I did not need the slider attachment. I used both B&W and Curt’s guides and they both showed that I needed the slider. Once installed I tried it and I have at least 6” of cab clearance at 90deg without sliding the hitch back. The slider adds a lot of weight and expense that was not necessary.

There are two long scratches along the left rail that did not happen during shipping. This is going into a new truck and I need to paint it to keep it from rusting. etrailer credited me just over 5% of the total price of the hitch. I am very disappointed with their resolution. Shipping costs both ways to resolve this issue would be nearer $300. I won't be purchasing any more products from etraler.

Click to Enlarge

Purchase and delivery went very smoothly and was right on time. Hitch was packaged very well. Works exactly as advertised. Got the slider hitch as recommended by eTrailer, good recommendation. Due to the weight of the hitch it requires two people or hoist mechanism to install it.

This hitch is very easy to use and moves flawlessly along the slide rails. And talk about sturdy... this thing is solid. Very well engineered.