bing tracking image

Best 2012 Chevrolet Traverse Bike Racks

change vehicle


Bike Rack Videos

Thule Trunk Bike Racks Review - 2012 Chevrolet Traverse

Today on our 2014 Chevrolet Traverse we're going to be test fitting the Thule Raceway Pro hatch or truck mounted bike rack, part number TH9001PRO. As you can see we already have a bike rack installed on there, let's go ahead and get a little bit closer and show you some of the features. As you can see there are three points of contacts on the bike frame. You have the two straps on top and the anti-sway strap on the side. This keeps it from going back and forth and possibly hitting the other bike that you have installed on it. Let's go ahead and take this off. It's always a good idea to reattach your straps so they're not flapping around while you're driving or possibly losing them while you're driving. Next I'm going to give you a measurement about how far this sticks out from the back of your vehicle so you know that.



Thule Archway Trunk Bike Racks Review - 2012 Chevrolet Traverse

Today on our 2012 Chevrolet Traverse, we're going to be test fitting the Thule Archway 2 bike carrier. Part number TH9009XT. This is for both trunks and hatches. As you can see we already have a bike on our rack. Let's go ahead and take a closer look at some of the features. First off, I'd like to point out, this has 3 points of contact with your bike frame. You have 2 straps up here, and 1 anti-sway strap down here, which keeps the bike from gong back and forth and possibly bumping into the bike you have in front of it, or even into the car if it we're close enough.



Hollywood Racks Over-the-Top Trunk Bike Racks Review - 2012 Chevrolet Traverse

Today in our 2012 Chevrolet Traverse, we're going to be test fitting the Hollywood Rack's over the top 2 bike rack, part number HRF2. As you can see, we already have a bike installed on our rack. Let's go ahead and take a closer look at some of the features. Here we have 3 points of contact to the bike's frame. We have the 2 straps on top, plus an anti-sway strap on the side here, which keeps it moving back and forth, possibly hitting the vehicle or the bike in front of it. Let's go ahead and take it off. Now it's always good practice to reinstall your straps after you've taken them off, just so their not flapping around while you drive, and so you don't lose them while you drive. Now I'd like to give you a measurement to give you the distance from the back of of the hatch, how much is added to it.



Thule Trunk Bike Racks Review - 2012 Chevrolet Traverse TH9006XT

Today on our 2012 Chevrolet Traverse, we're going to be showing you the Thule Gateway XT 2-bike rack, part number TH9006XT. As you can see, we already have a bike on the rack. Let's go ahead and take a closer look and show you some of the features. Now, with this bike rack, there are 3 points of contact on the frame. There are 2 straps on top to hold it in place and an anti-sway strap here which keeps it from going back and forth hitting maybe your vehicle or possibly the bike in front of it. Let's go ahead and take that off.



Kuat NV Hitch Bike Rack Review - 2012 Chevrolet Traverse

Today on our 2012 Chevrolet Traverse well be test fitting the Kuat NV platform style aluminum two bike rack part #: N101. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well line up the pinholes, insert our pin through our pinholes and secure it and lock it on the other side. We can then turn the black knob at the back of the shank to engage the anti-rattle device. Now with the Kuat NV secured to our Traverse well go ahead and go over a few clearance measurements to see how the two fit together. We have about 16 inches of ground clearance at the rear of the carrier with the platform folded up.



Hollywood Racks Traveler Hitch Bike Rack Review - 2012 Chevrolet Traverse

Today, on our 2012 Chevrolet Traverse, we'll be test fitting the Hollywood Racks Traveler 4 bike rack, part number HR8500. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll line up the pinholes, enter our anti-rattle bolt into the pinholes and tighten it down with a wrench. With our Hollywood Racks Traveler secured to our Traverse, we'll go over a few clearance measurements to see how the 2 fit together. We have about 16 1/2 inches of ground clearance. The closest part of our bike rack to the closest part of our Traverse is about 1/4 of an inch away. With the cradle arms folded down, we've added about 6 inches to the overall length of our Traverse. We can now pull the black pin at the top of the mast to swing the cradle arms out. With the cradle arms out, we've added about 29 1/2 inches to the overall length of our Traverse. To access the cargo area, we can pull the black pin at the base of the bike rack and tilt the mast down.



Yakima DoubleDown Ace Hitch Bike Rack Review - 2012 Chevrolet Traverse

Today on our 2012 Chevrolet Traverse well be test fitting the Yakima Doubledown Ace 4-Bike Carrier for 1 and 2 inch hitches, part number y02451. To begin our test fit, well slide the shank of our carrier into the receiver tube of the hitch, line up the pin hole, and install our attached pin. Well move to the rear of the shank and tighten the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now well go over some clearance measurements. We have about 16 inches of ground clearance. The closest point of the carrier to the rear of our Traverse is about 3 inches.



Yakima DoubleDown Ace 2 Bike Rack Review - 2012 Chevrolet Traverse

Today on our 2012 Chevrolet Traverse well be test fitting the Yakima Doubledown Ace 2-Bike Carrier for 1 and 2 inch hitches, part number y02450. To begin our test fit, well slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install the attached pin. Well move to the rear of the shank and tighten the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now well go over some clearance measurements. We have about 16 inches of ground clearance. The closest point of the carrier to the rear of our vehicle is about 3 inches.



Thule Hitching Post Pro Hitch Bike Rack Review - 2012 Chevrolet Traverse

Today on our 2012 Chevrolet Traverse well be test fitting the Thule Hitching post bike carrier, part number th934xtr. To mount the carrier to our vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up the hitch pin hole, insert our anti rattle bolt and tighten it down with a wrench. Next were going to check for rear vehicle access. Well remove the pin at the base of the bike rack so we can tilt it down. Then well open the cargo door of our Traverse to make sure we can still access the cargo area and open the door.



Thule Vertex 4 Hitch Bike Rack Review - 2012 Chevrolet Traverse

Today on our 2012 Chevrolet Traverse well be test fitting the Thule Vertex four-bike carrier, part number TH9029. Now to begin our test fit well simply place the bike rack shank into the hitch, clamp hitch pinhole and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. Now well go ahead and give you a few measurements. Our bike rack ground clearance is 17 inches and from the closed point of the bike rack to the back of the vehicle is 1-1/2 five inches. We can now go ahead and pull the hitch switch at the bottom of the bike rack mast to tilt the mast down.



Thule Parkway 2 Hitch Bike Rack Review - 2012 Chevrolet Traverse

Today on our 2012 Chevrolet Traverse, well be test fitting the Thule Parkway 2-Bike carrier part number TH958. Now to begin our test fit, well place the bike rack shank into the hitch, line up the hitch pinhole and install the anti-rattle bolt. With our bolt tight our bike racks secured to the vehicle. Now well go ahead and give you a few measurements. From the closest point of the bike rack to the back of the vehicle is a mere inch and our ground clearance at the bike rack is 16 inches. Now well go ahead and pull the pin at the bottom of the bike rack mast and open our cargo door.



SportRack Escape 3 Hitch Bike Rack Review - 2012 Chevrolet Traverse

Today on our 2012 Chevrolet Traverse, we are going to test fit the Sportrack Escape 3 bike rack part number a30403. With our bike rack already pre-assembled and our vehicle already equipped with a 2-inch hitch, we can go ahead and slide the bike rack shank directly into the 2-inch hitch on the vehicle. Then we'll install and tighten down our anti-inadible and install our safety clip. As you can see with the anti-inadible tighten down it really takes out any rattle or movement between the bike rack and the hitch. Alright with our bike rack loaded, we'll go ahaed and show you what it looks like in its stored position. We'll remove the hinge pin and fold the arms down.





2012 Chevrolet Traverse Bike Rack Questions