# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
eTrailer is awesome. Product is of excellent quality and received it in only two days.
# 2
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 3
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
eTrailer is awesome. Product is of excellent quality and received it in only two days.
# 4
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Hitch was great for my 2011 Acadia. Customer rep’s advice on electrical wiring package, etc. was invaluable. Hitch came in 2 days. I will definitely be ordering from them again.
The product was exactly what I needed. I have a GMC Acadia and the hitch is under the bumper by aprox 4". With a standard length ball mount I was not able to raise my lift gate on vehicle without hitting the trailer. The extra long ball mount did the trick. The service from eTrailer was excellent. The product shipped the same day I ordered it and I was able to track it with the provided shipping info. Thanks Juanita
# 5
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 6
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
the product looks good. I'll use it next season.
Nice
# 7
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Hitch was great for my 2011 Acadia. Customer rep’s advice on electrical wiring package, etc. was invaluable. Hitch came in 2 days. I will definitely be ordering from them again.
The product was exactly what I needed. I have a GMC Acadia and the hitch is under the bumper by aprox 4". With a standard length ball mount I was not able to raise my lift gate on vehicle without hitting the trailer. The extra long ball mount did the trick. The service from eTrailer was excellent. The product shipped the same day I ordered it and I was able to track it with the provided shipping info. Thanks Juanita
# 8
Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs
Excellent construction. Heavier than I expected. Great draw bar for the price. Delivered quickly. No issues.
Haven't used it yet. I bought it because of CURT's quality. It was beat up in shipping though.
# 9
Curt Dual Length Ball Mount for 2" Hitches - 2-3/8" Rise, 3-5/8" Drop - 7,500 lbs
I recently had gotten a new tow vehicle and my 13' trailer was hooked up to and showed a lift to my hitch and back of trailer was lower. I called etrailer and talked with Cathy T who helped me with my problem. Very Satisfied with outcome.*****
Purchased to extend the trailer away from the back of the vehicle, and increase the drop. Initially could not fit in to my receiver, eventually figured out that the end of the 2" square was mushroomed, had to remove excess metal with a rotary tool. now it fits as far as the first 5/8" pin hole. No issues with use - seems sturdy, metal finish seems durable. Didn't drop the trailer tongue as much as I had hoped, but that's on me - I was probably running a 3" drop before, but I thought it was 2".
# 10
Curt Fusion Ball Mount for 2" Hitches - 1-7/8" Ball - 2" Drop - 5,000 lbs
I am very happy with my trailer hitch receiver from etrailer. I installed one on my 2011 Toyota rav4 for towing a small teardrop trailer I made during the pandemic. I also purchased a wiring harness to power the trailer lights from etrailer and after some doing have it working well. The cost of doing it myself was a small fraction of having the dealership do the work. The hitch receiver is easy to install as there are pre drilled holes to receive bolts in the frame. The wiring is a bit more complicated but I did it. God bless online videos. I'm happy with the results.
well made, easy installation, was what i was looking for.
# 11
Curt Class III Ball Mount with 1-7/8" Ball - 4" Drop - 3,500 lbs
Hitch was great for my 2011 Acadia. Customer rep’s advice on electrical wiring package, etc. was invaluable. Hitch came in 2 days. I will definitely be ordering from them again.
The product was exactly what I needed. I have a GMC Acadia and the hitch is under the bumper by aprox 4". With a standard length ball mount I was not able to raise my lift gate on vehicle without hitting the trailer. The extra long ball mount did the trick. The service from eTrailer was excellent. The product shipped the same day I ordered it and I was able to track it with the provided shipping info. Thanks Juanita
# 12
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
great kit for my Acadia. this should cover me for almost any trailer is randomly have to grab.
Came in less than a week and was very easy to install. Have yet to use to pull a trailer.
# 13
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs
Purchased for a 2006 Jeep liberty. the only issue I have is that it connects right below the spare tire, making trailer attachment more difficult that it should be. If I had gotten a slightly longer hitch, wouldn't have been an issue. It's not a deal breaker, and the hitch itself has works perfectly.
I haul a 5.5x10 open trailer w/ a 900 lb. ZTR, a push mower, and a handful of other tools 3 days a week. It is what it is. It does the job, no problem. A little finish wear and rust on the ball, but nothing major. I LIVE ON A DIRT ROAD, which is probably responsible for the wear.
# 14
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 15
Curt Class III Ball Mount with 2-5/16" Ball - 2" Drop - 7,500 lbs
Hitch was great for my 2011 Acadia. Customer rep’s advice on electrical wiring package, etc. was invaluable. Hitch came in 2 days. I will definitely be ordering from them again.
The product was exactly what I needed. I have a GMC Acadia and the hitch is under the bumper by aprox 4". With a standard length ball mount I was not able to raise my lift gate on vehicle without hitting the trailer. The extra long ball mount did the trick. The service from eTrailer was excellent. The product shipped the same day I ordered it and I was able to track it with the provided shipping info. Thanks Juanita
# 16
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 2" Rise, 4" Drop - 7.5K
Absolutely outstanding! Everything fit perfectly and was easy to install. Customer service was the best I have ever experienced, far and away so. Very professional, friendly and helpful. I highly recommend this company and I wish everyone did business like them.
Nice combination to go with my front hitch for the F150.
# 17
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
Hitch was great for my 2011 Acadia. Customer rep’s advice on electrical wiring package, etc. was invaluable. Hitch came in 2 days. I will definitely be ordering from them again.
The product was exactly what I needed. I have a GMC Acadia and the hitch is under the bumper by aprox 4". With a standard length ball mount I was not able to raise my lift gate on vehicle without hitting the trailer. The extra long ball mount did the trick. The service from eTrailer was excellent. The product shipped the same day I ordered it and I was able to track it with the provided shipping info. Thanks Juanita
# 18
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Rise - 7,500 lbs
Nice solid (not hollow) and WELDED hitch. Have logged about 5,000 miles this year with no problems. I had many problems with bolted on balls, welded hitches are the way to go.
Exactly what I needed for my new Subaru hitch and quick delivery. Fusion ball mount nice feature..no need to remember to tighten before each use.
# 19
Draw-Tite Ball Mount - 6-3/4" Rise, 8" Drop - 10" Long - 5,000 lbs
eTrailer is awesome. Product is of excellent quality and received it in only two days.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."