# 1
Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks
Excellent product!! I generally don't like to have to assemble things once I receive a shipment, but this was truly so easy to assemble. I purchased the locking anti-rattle bolt, bike rack and hitch (hitch was installed by UHaul for $45.00) for a 2015 Toyota Prius with the package 5. Just took it out this weekend with 2 bikes on the rack and could not tell it was back there!!
I bought the etrailer draw-tite sport frame hitch receiver and it was a perfect fit for my Prius V - 5, the mechanic thought it was made by the manufacturer. I'm very happy with my purchase!
# 2
Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks w/ 1-1/4" & Combo Shanks - 7'
The trailer fits and holds two bikes on my Prius. Only catch , it needs a mechanic to install because it is too difficult to reach under the vehicle.
I bought this rack for my 2010 Prius. The bike rack is easy to assemble and very sturdy. What proved challenging for me was getting the 1-1/4" shank to slip into the hitch I had installed by U Haul. After some pounding, it finally went into place. How I'm going to remove the rack from the hitch is probably going to be a challenge. The bikes are held very securely and I hardly noticed them as I drove. etrailer was great. They promptly answered question I sent by email, and the rack arrived within a few days of submitting the order.
# 3
Trailer Hitch Receiver Lock - Padlock Style for 1-1/4" Trailer Hitch Receiver
This seems like a very nice product and will work well. Lock fits as advertised and is simple to use. I would purchase one again if needed.
I needed a lock for my Pro Series 4 bike trailer as it only has a cotter pin and I was taking it off my van every time I went to the trail for fear it would get stolen. Giving it four stars since I haven't given it a test use but it fits perfectly! I could not be more grateful to a previous reviewer for suggesting this solution.
# 4
Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
Clearance around the Tesla Model Y hitch receiver is tight but this anti-rattle hitch lock fit perfectly, even after torquing it to spec. The lock mechanism on the left comes very close to the 7-pin connector but it doesn’t touch and the lock rotates freely around the pin. Product appears to be of high quality.
I have ordered and used this device before. What is disgraceful is the respect shown toward products shipped from etrailer. While the two devices/parts I ordered probably could have through a war zone without any damage, the fact is IF they are beaten out of the box while in shipping is not right. Add some appropriate packing. Grade F on your packaging.
# 5
Hitch Tite Anti-Rattle Hitch Lock for Saris Bike Racks with 1-1/4" and 2" Shanks
The hitch lock spans my new 2.5 inch receiver with about 1/4 inch to spare and is now lockable. The original hitch tite pin is the same length but the lock on this item locks from the side and makes better use of the pin.
Thanks for keeping me posted on my order, Korren. It arrived when promised.
# 6
Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches
It installed easily and quickly. Good price and fast delivery. This is the 3rd product from etrailer and Curt for me.
Had it on my hitch for a month this spring and then could not get the lock to work and the key was stuck in. Tried oiling and the key finally broke off in my hand. After another couple of months I snapped off the bent end of the pin with a long pry bar. The pin was rusting! Very disappointing for a Master Lock product. Just got a $xx locking pin through you that looks tougher but it is very hard to use: have to push in on the key pretty hard, while keeping the round lock from turning, and holding in the pin against the pushing on the key. I added a small stainless hose clamp to the lock so that the lock can be held to stop the spinning and hold the thrust of the key. We trailered our old Ferrari to Florida this spring with the old pin to win our class at Amilia Island – 1946 to 1950 limited production European sports and GT cars. If you check we have a lot of trailer stuff that we got from you in the past and your service and stuff have been great.
# 7
Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks w/ 2" Shanks - 8-1/2' Long
This lock does not work with the Swagman XCT2 tilt rack. The diameter of the pin to too big to fit through the whole. Plus, the wholes in the rack where the pin is inserted has no treads so this lock and cable are useless. It appears I wasted $ on this purchase.
# 8
Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set - 1-1/4" and 2" Hitches
Master locks are a name brand. It is so nice to have all locks keyed the same. This decreases the chance the camper will get stolen.
Ample room for the bits in the bag, which is nice. I used some of the shipping bubble wrap to pad it. Everything looks nice, works properly, and I've already installed the two trailer locks on my trailer. Decent theft deterrent, will at least slow 'em down or walk if they're lazy.
# 9
Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers - 1-1/4" and 2" Hitches
Very sturdy lock that fits my bike rack. I didn’t hook the bike rack up to the trailer hitch but the photo shows that it fits. There is other locks on the market but I highly recommend this lock!
I'm happy with the product but have one observation. The length of the hitch pin is about 3/16 inch too short to use with the included washers. I can only get it to lock correctly with no washers. Thanks
# 10
Curt Trailer Hitch Receiver Lock - 1-1/4" and 2" Hitches - Stainless Steel
The lock is high quality and I like the fact that it is stainless steel. Works fine with the bike rack (1.5 inch receiver pin easily goes through the rack on a 2 inch receiver). Saves a lot of time over having to bolt things together every time I want to take the bike's out.
# 11
Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks
A must have for the Swagman XTC-4 bike rack. Sure, I want to protect my bikes but I needed something that would protect my $200+ bike rack, too. You need a wrench to tighten the bolt, which does a good job of keeping the rack from rattling but is a pain because you always need to have a wrench around. But that's not the fault of the lock. The lock is pretty neat in that you can rotate the key hole so it's covered up to keep mud and weather out. I'd buy it again if needed and the price here at etrailer.com was good.
Great product. Fit bike rack / trailer hitch just as stated. So glad I found it online.
# 12
Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches
Works exactly as described. Secures my Go Rhino bumper step, and keeps it from rattling. Only problem is I wish the bolt head was 3/4". Most socket sets don't go beyond 3/4", so you'll need a 7/8" box wrench or Cresent wrench to install/remove it.
Great product, NO MORE CLUNKING NOISE!!! Liked it so much I purchased another.
# 13
Trailer Hitch Receiver Lock for 2" Trailer Hitches - Stainless Steel
About 6 months after owning it, the lock is completely froze up. Can't cut the darn thing off without cutting my safety chain hook up off either
Would’ve been a great little lock had it actually fit in the housing. Too short for mine. Turns out my housing is 3”, not 2”. My bad. Paid $25 for it, etrailer wants $17 for return shipping fee? Pretty lame. So buyer beware, measure your housing first!
# 14
Master Lock Hitch Receiver and Coupler Latch Lock Set - Swivel Design - 2" Hitches
Great locks for the hitch and coupler, made to last.
I like it, the 90deg bolt works perfect for me. The hitch is recessed into the bumper on these GMC Yukon's, trying to reach in long-ways and (blind) with a key is not easy, having the key hole face out towards you makes install/uninstall of the draw bar much easier.
# 15
Advantage Threaded Trailer Hitch Receiver Lock for 1-1/4" Hitches
Exactually what we needed to lock an extension adapter on our trailer hitch from 1.25 to 2.0” for a bike rack. Worked perfectly. The screw lock keeps the bike rack from rocking and the locking mechanism safeguards the whole package.
You might think no one would take the trouble to loosen a bolt and steal your bike rack but we found out otherwise. This bolt and lock will do the trick to keep our rack safe!
# 16
HitchMate Threaded Trailer Hitch Receiver Lock for 2" Hitches
Emily, was great to deal with. She took an interested in my need , did some research and solved my problem. Great job!!
Works perfectly on my old sportworks rack. Thank to the other reviewer for mentioning it worked on his. There was a gap between the lock and the hitch. I bought ten fender washers to fill the gap. For the price, it was an excellent purchase from eTrailer.
# 17
Blue Ox Trailer Hitch Receiver Lock for 2" Hitches
Good security and I like having one key operate the pins
Easy to use and provides much extra security. Using it with a bike rack that stays on the jeep most of the time.
# 18
Hitch Lock for Kuat Bike Racks - 2" Hitches
Got it to match my kuat rack. Works greak
Works Great on my 2023 Tesla Model Y
# 19
InfiniteRule Hitch Lock for 2" Hitches - 2-5/8" Span - Stainless Steel
This does not fit a 2006 ford explorer. The 7pin plug is too close to the reciever. The pin goes through but the lock will not go on the pin. The pin will not go in the other way. O have these on my 2006 f250 and they work great so far!
I have NOT received the hitch ball bushing or infinite hitch lock.today is sat 10/14/23.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"