Most Popular Fixed Fifth Wheel for 2004 Ford F-150

This product gets a three based on shipping condition only. etrailer customer service and shipping time was excellent as usual. The shipment arrived 2 days after the order was placed, as promised. However, as others have noted, the product packing is poor. The boxes arrived with significant damage resulting in cosmetic damage to several parts. I haven't put the hitch to use yet but I am assuming it will work correctly. I will leave a followup after I use it.

Click to Enlarge

Click to Enlarge

The hitch arrived nicely packed in two boxes. Very easy to assemble and install on my existing bed rails. I took the RV out for a first run with the hitch, and it performed as advertised. It was a no fuss transaction and the hitch arrived on-time!

Click to Enlarge

After ordering rails for a fifth wheel that I had in an older truck, I was told the rails I ordered would work with my fifth wheel, however after installing the front rail, the fifth wheel would not work with the rails ordered. I ended up ordering a new fifth wheel plate. That was easier than removing the frame brackets I had already installed. It appears that there was a mis communication between the person I talked to with etrailer. Instead of a 1/2 day install it took a day and a half plus wait time for the fifth wheel to get to my address. However once installed it appears to be good.

Click to Enlarge

The hitch worked great. Reason for the 2 stars is the package got delayed twice in transit and I had to reschedule the pickup of my fifth wheel. When I also received the package the main crossmember bar was bent at the mounting point. Luckily I was able to bend it back but UPS needs to get there act together.

Click to Enlarge

I purchased both the Curt A16 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs - C16120, and Reese Pull Pin Lock Plates for 5th Wheel Trailer Hitches - Qty 4 - RP58093 for my F350 SD 4X4 Crew Cab Long Bed. I'm pulling a 30' Retro 5th. Wheel and at times I pull my tandem axle UTV Trailer (Double Trailers) . I already had the rails installed in my truck, this fit right in and I used the new Pins and Lock Plates for securing to truck. I have pulled all over from South Dakota and the Northwest. The Hitch has performed Flawlessly. No bucking, nor clunking. Very quiet and smooth ride. I would recommend this set up to anyone for convenience of Hook up and Disconnect, Excellent towing, quiet, and the security of the lock pins. I use Disc locks to prevent access for bolt cutters.

Click to Enlarge

I was fully expecting a hitch in excess of 100 pounds to show up in a destroyed box. This did not. They had taken the Time and effort to cover the box with an additional layer of cardboard and it must have had a million staples in it. It was almost comical, you will need a crowbar or large screwdriver to get it open. However, when I did finally get the package open I found a perfectly un scratched hitch with no missing parts. I have not pulled with the hitch yet but , it does look like it is going to perform great. I'm using this in a 2006 ram 2500 4x4 short bed pulling a 2015 forest river Salem and it allows 91 degrees of turning due to the clipped corners on the front cap of the trailer. I will be curious to see how long the rubber isolators last before needing replaced and if they are readily available. Also the curt sticker on the hitch was peeling off when I took it out of the box, would be nice to get that replaced.

Click to Enlarge

We have the Anderson Hitch installed on our 2017 Ford SuperDuty and pull a Reflection 337RLS. We have traveled over 4,000 miles and have been extremely satisfied. The hitch allows plenty of clearance between 5th wheel, bed, and the truck cab. Hook-up and disconnect has always been easy, even with RV lots that were uneven dirt lots. I use Curt thin rubber sound dampeners (item 16900) and this provides a quiet, tight fit between the rails and hitch. Of course the light weight makes it easy to remove when not towing and less weight when you are towing. A great product for the right truck, trailer combination.

Click to Enlarge

After receiving the kit i saw another one on the shelf at a local store. I noticed the one on the shelf had a steel ball cup mounted to it. Mine did not have that part. I called andersen and asked if the ball cup was available for purchase seperately. They told me no need to purchase bevause they will ship me one for free! Later on, i towed my trailer to a camp site and upon arrival i could not get the release pin to open to drop the trailer while we stayed in it. I called andersen and described the problem i had, they shipped a whole new block and cable assembly for free!! I am ver pleased with the product and also impressed with the level of customer service!

Click to Enlarge

Product is very well made. Glad I went with B and W Patriot Hitch. Once the bed rails were installed the rest was a breeze. Now it's time to get a 5th wheel and hit the open road. etrailer, my go-to website.

Click to Enlarge

Click to Enlarge

I bought this hitch to replace a slider hitch from another manufacturer. I wanted something I could get out of the bed without help, and with the 2" offset, I can get plenty of angle in a tight turn, thus eliminating the need for a slider. So far this hitch is fantastic. Hook up is so easy. Handle moves with zero effort. Same for unhooking. As soon as it was installed, I did a test run, and it was rock solid. I tried to make it chuck when starting and stopping. It wouldn't do it. Zero slop. On that note, the tolerances are tight on this thing from the bolt holes to the legs that insert it into the rails. My rails we're not perfectly lined up and required a little dremel and foot stomping to get it in the rails. In summary, if your looking for solid, conventional, non-slider FW hitch, this one is a great choice.

Click to Enlarge

Click to Enlarge

The truck that got the install is a 2002 Ford F350 Super Duty 7.3 L Diesel dually. The Demco Recon 5th wheel hitch (DM8550043) looks like a well made, heavy duty hitch. All the welds are precise and well done. I like the single wrap around jaw with the real thick bar that backs that up. The handle that pulls out to unlock the jaw moves with ease and locks in the out position when the jaw opens. When the king pin comes in contact with the back of jaw, the jaw wraps around the king pin, the handle closes, you put in the safety pin and your ready to go RVing. I chose the Husky Custom Rails and installation kit (HT31405-686) for my install. The reason I chose these rails over the ones that etrailer had matched up for the hitch is, I had previously installed a set of Airlift Airbags and I didn't want the rail install to interfere with the airbags. It was a good choice, there was no interference at all. If I had not had the bags, I would have chose the rails and install kit that require no drilling. Drilling the holes went very fast and easy, it was torking the rear bolts down that was very difficult. There was not enough room to get a wrench of any kind around the nut. I wound up using a set of vise grips on the nut while a friend of mine torked the bolt slowly from above. All and all I'm happy with the product and I'll give another review in a year.

Click to Enlarge

Click to Enlarge

Excellent product and customer service was outstanding. I just bought the product so I haven’t towed with it yet but after many many years of towing with other fifth wheel hitches, I can tell this is going to be an huge improvement!

I wanted to be able to easily utilize my truck bed and this hitch provides that in spades! Easy to remove and install. I absolutely have to give a shout out to Paula on customer service. She was amazing! My first shipment was damaged and missing a vital part. Paula had another one shipped right away and made my return shipment a breeze. She stayed in contact with me to the end. I felt like she shared in my joy once the install was complete! The hitch is super adjustable for optimal placement in the bed and height of the trailer. Make a few quick measurements and it just goes together quickly. Love the dual jaw release lever. Our last 5th wheel hitch had the standard pull to release lever and it was often very difficult to operate. This lever style is a game changer. Overall, I couldn't be more pleased with the product and customer service!

Click to Enlarge

Click to Enlarge

I installed this system in my classic square body Silverado after installing the Turnover Ball BK1400 gooseneck hitch. Both work great together and this companion installed beautifully. I tow a 40’ Cougar camper with it.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Tried to install this on a 2001 Chevy Silverado 3500, dual rear wheel, long bed, 4x4, diesel engine truck. The clamp style mounting simply does not work. The ONLY way I can see this working is by drilling added holes in the frame of the truck at the front end of the side plates. This is because of a bend in the frame at the clamp location. Also at this location the frame is boxed in and any bolt holes will be hidden. Bolts would have to fished in with bolt wires.

Click to Enlarge

I am very pleased with my purchase of the Reese M5, a major improvement over my old receiver. Great service from etrailer as well.

6000 miles towing this year; loaded trailer weight 16,480 lbs (based on CAT scale weight tickets). Hitch is awesome. Very secure with no noticeable chucking. I can remove and install this hitch by myself. The two pieces are very manageable. My fifth B&W hitch over the years; 2 turnover ball goosenecks and 2 tow & stows. Quality hitches which I recommend highly.

Click to Enlarge

Very happy with the B&W hitch we received. etrailer and their staff were excellent to work with. Shipping was sooner than projected. And the installation was extremely easy. Would absolutely use etrailer again as well as B&W products. Thank you all!

Click to Enlarge

Click to Enlarge

Click to Enlarge

This 5th wheel has exceeded all my expectations. It’s worked flawlessly for thousands of miles and many different type of 5th wheels trailers. Not a peep, B&W FTW!!

Click to Enlarge

So far this has been a great hitch. Takes up a lot less space than the massive auto slider hitch that I had previously, and have had no problem with any sharp turns so far. It is also much easier to handle by myself taking it out of the truck. The only thing I’ve had some problems with is getting the handle lock pin out once I’m ready to disconnect. To solve, I’ve started wedging the flat part of my crowbar under the head of the pin and tapping it with a rubber mallet from underneath.

Truly happy with this product and can't wait to go to work! etrailer sent me everything I requested and the installer had no problems. Everything was packed well in shipping with no problems.

Click to Enlarge

2005 Dodge Quad Cab Dully , Cedar Creek 36 ckts 16k very nice hitch , shipped relay fast 3 days to east coast, easy to install : had rails from old hitch, it did come a LITTLE scratched up from shipping . one thing i wish it had more height / it does sit lower than old hitch buy 1 inch. haven't tried pulling yet / will up date latter . hope it pulls as good as it looks. now no problem for bigger trailer, i hope! maybe a toy hauler?

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I bought a new trailer recently that weighs 16k and I just didn't feel secure using my Reese pro series 16k to Haul with. So I started looking at various hitches. I've had 3 other fifth wheel hitches in the past. All of them have been 15 and 16k models. What I never liked was the latching system. I've even had a trailer come out of the hitch due to a poor latching hook up. There wasn't an good way to lock the hitch. Some of it was my fault and some was a poor design. When I saw the Curt Q20 had a latch on the handle and also was color coded I was hooked. This hitch satisfied my want list. It arrived 4 days after I ordered it and like other comments I've read it was full of heavy duty staples. It was double packaged. There had to be over 50 staples. It was defiantly packaged securely. After dimantaling the packing I finally got to the hitch. There were a few scratches on the hitch from all the staples but a bit of black touch up paint took care of that. After all the hitch is going to be used and get scrached by me anyways. Four bolts and it was together. It fit perfictly it my existing rails. By the way it's heavier than my other hitches. I wound be apprehensive to pull my new trailer. If your looking for a great hitch at a great price you can't go wrong.

Click to Enlarge

Unlike other reviews...I will say that my packages all arrived in perfect condition. (Boxes were all intact). Assembling the Q20 is a breeze and by all appearances this hitch certainly seems to be more than adequate for my needs. I haven't had a chance to actually use it yet...but from what I can tell, I certainly don't expect any issues. I like the way the hitch latches and unlatches, and that you can add a lock to prevent someone from opening the jaws while you are parked somewhere. I think the only thing I'll add is a lock in place of one of the pins...just to make it difficult for someone to remove and steal the hitch.

Click to Enlarge

really like how well built the hitch is. It's heavy to lift but manageable. Head can be easily separated from frame by removing both quick pins to lift out of truck in 2 pieces. I plan on installing an electric hoist from Harbor freight in my garage to lift hitch in and out of truck in one piece. Definitely would recommend this hitch to anyone.

Click to Enlarge

Very impressed with the quality and performance of this product

Click to Enlarge

Click to Enlarge

Click to Enlarge

I would give this hitch 5 stars but it was damaged when I got it. The handle was apparently dented when it was shipped so I had the choice of either sending sending back a 125 pound hitch or banging out a dent in the handle and getting the damn thing installed.

Excellent on all levels. Fast shipping via right company.

Click to Enlarge

This B&W 25k 5th wheel hitch is amazing and tuff. So glad I purchased this one from you all. Thanks my Ram 3500 love it. Lol

Click to Enlarge

Click to Enlarge

The shipper’s had issues with the box it wouldn’t fit on their conveyor belts the outside of the box was dinged up pretty good and the other two boxes were together but undamaged the frame took a few dings where it rattled around in the trailer to me.

Click to Enlarge

Click to Enlarge

Easy to install. F350 dually puck system. BakFlip cover doesn't make contact when closed with the hitch in the highest position.

Click to Enlarge

This hitch is the finest engineered 5th wheel hitch I have used over a forty year period. I am very happy with my purchase and your finest service!!!

I have towed with the Curt A20 for a few thousand miles. I really like this hitch. The visual hooked versus unkooked indicator is awesome. It operates flawlessly. I do get some chucking over bridge expansion joints. However, it seems like most people have this problem. On normal roads it pulls great.

Click to Enlarge

Hitch slid into existing rails after a very minor adjustment. Took my son and I about 25 minutes to assemble, torgue bolts and adjust rails in the bed of my truck. we have used it twice already and camper did not bang and pop like it did on old worn out receiver. The ordering process was also very smooth. Kelsey took the time to explain the differences in the hitches before I made my decision! I Would recommend both etrailer and this hitch if you are looking to change out!

Click to Enlarge

Click to Enlarge

I am a new 5th wheel owner, who is also a 52yr old female, so I wanted/needed something that I could understand and easy to take out on my own. I just picked up my 5th wheel and my older 2005 dodge 2500 (8' bed) truck was a hard to find a good fit. I completely recommend this hitch. It has enough adjustments for my truck to tow my 5th wheel level and never once did I have to worry about the truck bed or my back window as this keeps everything up and away. To hook it up was just as easy as I could see everything just like the video shows. Very happy with this purchase.

I recently switched to the Crosswing from a Curt Q16 slider hitch. I loved the Q16 other than the weight of it. My loaded trailer weight is around 11,500 pounds. The Crosswing is a very stout hitch, and is extremely easy to hitch and unhitch, even at slight angles. While towing, I have noticed that it is quieter than the Q16 and chucking was nearly eliminated. I have to make a fairly tight turn in my Cul-de-sac, especially if there are cars parked on the street which I always slid the Q16 back while turning. I was worried about this but had no problem making the turn. The truck and trailer were close to a 90 degree angle and I still had over 6 inches between the cab and the front cap (2019 Silverado 2500HD short bed). I would definitely recommend this hitch.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I have ran a cheap competitor hitch for several years. A manufacturing defect (welded pivot pin) caused the hitch to fail and resulted in 18000$ damage to my truck and trailer. I chose the Curt 25000# hitch after much research and found it to be very well made and clearly shows when it is properly coupled. It is quiet and operates with minimal klunking and chunking going down the road. Overall I am very pleased.

Click to Enlarge

Mounted this hitch on my flatbed 3500 Ram and the hitch works flawlessly. Pull 44' tri-axle weighing in at 23,000# with ease. Very easy to use and understand, very easy to maintain.

Click to Enlarge

I like it’s design and how it sits in the bed. It seems to want to rotate some while pulling. I see some reviews that other people are having this problem also. Some have put a bolt down through the base into the truck bed. I haven’t wanted to do that as of yet. Otherwise I like the hitch.

Click to Enlarge

Easy to set up and use I borrowed a buddies cause I bought a camper and didn’t have a hitch set up in the bed of my truck just had the goose neck ball pulled real nice so I order o e just like it