Trailer Brake Controller Specs:
Features:
...Automatic leveling lets you mount at any angle up and down for an easy installation Controller must be parallel with direction of travel and horizontally level Included harness hardwires to vehicle and plugs...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
...shorts Automatic leveling lets you mount at any angle up and down for an easy installation Controller must be parallel with direction of travel and horizontally level Mounting bracket and hardware included...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
...and horizontally level Included harness hardwires to vehicle and plugs into controller Plug-in, vehicle-specific adapter (sold separately) available for select vehicles to reduce installation time Mounting bracket...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
...brakes are being activated Quick and easy installation with included bracket and hardware 90-Degree vertical mounting range - must be horizontally level and parallel to direction of travel Plug-in...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
More Information >Videos
for Trailer Brake Controller
Help Articles
for Trailer Brake Controller
Expert Answers
for Trailer Brake Controller
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…
view full answer...On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...