Code: RED44FR-331-TPH-007
Trailer Brake Controller Specs:
Features:
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Elite's unique user-controlled mode gives you direct control of your braking for any weather or terrain.
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.
More Information >Code: RED44FR-331-TPH-007
Trailer Brake Controller Specs:
Features:
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Elite's unique user-controlled mode gives you direct control of your braking for any weather or terrain.
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: 90195-22292
Trailer Brake Controller Specs:
Features:
...don't need it Replacement wiring harness (sold separately) and replacement bracket (TK5906 - sold separately) required to swap controller between vehicles Specs: Application: trailers with up to 4 axles...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.
More Information >Code: 90195-22292
Trailer Brake Controller Specs:
Features:
...don't need it Replacement wiring harness (sold separately) and replacement bracket (TK5906 - sold separately) required to swap controller between vehicles Specs: Application: trailers with up to 4 axles...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Trailer Brake Controller Specs:
Features:
...between vehicles Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Dimensions: 5-1/8" long x 3-1/8"
Installation Notes: The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
Trailer Brake Controller Specs:
Features:
...between vehicles Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Dimensions: 5-1/8" long x 3-1/8"
Installation Notes:
You need item
ETBC7
($128.85) to install your controller.
Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.
Code: C51170-C51436
Trailer Brake Controller Specs:
Features:
...trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Main unit dimensions: 3" long x 3-1/2" wide x 7/8" tall...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.
More Information >Code: C51170-C51436
Trailer Brake Controller Specs:
Features:
...trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Main unit dimensions: 3" long x 3-1/2" wide x 7/8" tall...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C24VV-C51436
Trailer Brake Controller Specs:
Features:
...included Plug-in, vehicle-specific brake control adapter (sold separately) can be used to reduce installation time on certain vehicles Specs: Application: trailers with up to 4 axles (8 brake assemblies...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C24VV-C51436
Trailer Brake Controller Specs:
Features:
...included Plug-in, vehicle-specific brake control adapter (sold separately) can be used to reduce installation time on certain vehicles Specs: Application: trailers with up to 4 axles (8 brake assemblies...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.
More Information >Trailer Brake Controller Specs:
Features:
...span>axles (6 brake assemblies) Compatible with electric trailer brakes only Dimensions: 5-1/4" long x 6-7/8" wide x 1-1/2" tall Warranty: 3-Year for brake controller 1-Yea...
Installation Notes:
You need item ETBC7L ($114.64) to install your controller.
More Information >Trailer Brake Controller Specs:
Features:
...span>axles (6 brake assemblies) Compatible with electric trailer brakes only Dimensions: 5-1/4" long x 6-7/8" wide x 1-1/2" tall Warranty: 3-Year for brake controller 1-Yea...
Installation Notes:
More Information >Code: TK90160-22292
Trailer Brake Controller Specs:
Features:
...and hardware included Specs: Application: trailers with up to 3 axles (6 brake assemblies) Compatible with electric brakes only Dimensions: 5" long x 4-3/8" wide x 2-1/2" tall ...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: TK90160-22292
Trailer Brake Controller Specs:
Features:
...and hardware included Specs: Application: trailers with up to 3 axles (6 brake assemblies) Compatible with electric brakes only Dimensions: 5" long x 4-3/8" wide x 2-1/2" tall ...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.
More Information >Code: C27JR-C51436
Trailer Brake Controller Specs:
Features:
...sold separately) prevents sway Tire Linc (C54VV - sold separately) monitors your tire pressure and temperature Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.
More Information >Code: C27JR-C51436
Trailer Brake Controller Specs:
Features:
...sold separately) prevents sway Tire Linc (C54VV - sold separately) monitors your tire pressure and temperature Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Trailer Brake Controller Specs:
Features:
...monitors your tire pressure and temperature Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Dimensions: Base width...
Installation Notes:
More Information >Trailer Brake Controller Specs:
Features:
...monitors your tire pressure and temperature Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Dimensions: Base width...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
More Information >Code: 39510-22292
Trailer Brake Controller Specs:
Features:
...vehicle-specific brake-control adapter (sold separately) available for select vehicles to reduce installation time Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric brakes...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.
More Information >Code: 39510-22292
Trailer Brake Controller Specs:
Features:
...vehicle-specific brake-control adapter (sold separately) available for select vehicles to reduce installation time Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric brakes...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C74VV-C51436
Trailer Brake Controller Specs:
Features:
...control adapter (sold separately) available for select vehicles to reduce installation time Specs: Application: trailers with up to 3 axles (6 brake assemblies) Compatible with low-volt, PWM, ABS, cruise...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.
More Information >Code: C74VV-C51436
Trailer Brake Controller Specs:
Features:
...control adapter (sold separately) available for select vehicles to reduce installation time Specs: Application: trailers with up to 3 axles (6 brake assemblies) Compatible with low-volt, PWM, ABS, cruise...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C84VV-C51436
Trailer Brake Controller Specs:
Features:
...brake control adapter (sold separately) available for select vehicles to reduce installation time Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with low-volt, PWM, ABS...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C84VV-C51436
Trailer Brake Controller Specs:
Features:
...brake control adapter (sold separately) available for select vehicles to reduce installation time Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with low-volt, PWM, ABS...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.
More Information >Code: HA81760-HA81794-HBC
Trailer Brake Controller Specs:
Features:
...separately) available for select vehicles to reduce installation time Made in the USA Specs: Application: trailers with up to 3 axles (6 brake assemblies) Compatible with electric or electric-over-hydraulic...
Installation Notes:
You need item ETBC7 ($128.85) to install your controller.
Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.
More Information >Code: HA81760-HA81794-HBC
Trailer Brake Controller Specs:
Features:
...separately) available for select vehicles to reduce installation time Made in the USA Specs: Application: trailers with up to 3 axles (6 brake assemblies) Compatible with electric or electric-over-hydraulic...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Videos
for Trailer Brake Controller
Help Articles
for Trailer Brake Controller
Expert Answers
for Trailer Brake Controller
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your…
view full answer...I've never heard of an actual third brake light connector on a camper shell to plug in on a…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…
view full answer...On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…
view full answer...The number you provided,…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...