If you had a 7-way connector at the rear of your vehicle you would probably know it. It would be a black connector plastic connector like the picture I attached. If you have one then the # 118381 would work for you.
If not, you would instead want the Curt Wiring Kit part # C59496. view full answer...
Yes, we have the Draw Tite hitch part # 75210 as a confirmed fit for your 2004 Freightliner Sprinter 2500 that has the factory step bumper.
Draw Tite states that on vehicles with factory step bumper, bumper mounting brackets will be re-attached at original position with fasteners provided with hitch. view full answer...
The Konig XG12 Pro # TH01594245 tire chains will be easier to install on the 225/76-16 tires for your 2006 Dodge Sprinter, but you are correct that you need to go with the XB16 # TH01571245 instead. I recently reached out to Konig who said that the chains themselves don't necessarily have a weight rating but the smaller chains don't work well for larger vehicles like your Sprinter as they can be damaged. The XB16 chains will work great for your application though so that's what I recommend... view full answer...
The adapter for the Thule HideAway Awning # TH490010 that you referenced that allows it to fit in the top channels of roof rack crossbars is the part # TH490001 which does come with M8 T-Bolts like the part # 853-5715 that you mentioned. If you wanted just T-bolts that fit the # 853-5715 would be what you need. view full answer...
The Ark Drop Down Corner RV Stabilizer Jacks # AR34FR that you referenced installs by having the top of the bracket weld to the bottom of the RV frame. view full answer...
We have a couple of solutions for you you could simply use an adapter like you mentioned the Buyers Products 6-Way Round to 7-Way Blade RV Adapter with 8" Prewired Cable part # 337TC1067P would do the job but is an adapter so you're adding points of failure there.
I instead recommend adding a 7-way female socket on the back of your coach again an idea you had. The wiring process is very simple and I can provide you with the wiring schematics to guide you through it. To do this you will... view full answer...
I have a few options for your 2006 Dodge Sprinter 2500 with 2.7L I5 Engine, a block heater like the Kat's Heaters Custom Engine Block Heater part # KH11483 or an engine oil pan heater like the Kat's Heaters Oil or Transmission Pan Heating Pad part # KH24500. I recommend the block heater as it's a custom fit, designed for your exact vehicle whereas the oil pan heater is a universal stick-on type.
I agree that an oil pan heater with direct submersion would be best but this is unfortunately... view full answer...
Ok, so there are a couple things you can add to get the best overall performance to help your 2006 Dodge Sprinter 2500 to help with sway/leveling/bottoming out. First, I'll go ahead and list the parts:
- Front: SumoSprings Solo Custom Helper Springs # SSF-402-54
- Rear: SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SS62KV
The combination of both parts are going to give you a much better overall ride. As for the rating of the springs, Your question is perfectly understandable... view full answer...
When installing the Roadmaster Split Bushing for Anti-Sway Bar part # RM-205249-10, I recommend using the Mystik JT-6 part # L74FR. This is a marine grease that is very similar to what comes with their sway bars. view full answer...
The closest tire size we have to what you are looking for is a 175/80-13 which measures 24.1" diameter x 7" wide. This new size will be 2.8" larger in diameter and 1.3" larger in width than the 145/R12 tires that you have now. Please note that only half of this measurement will be applied to the top and sides. Unfortunately, we do not carry any 155/60-13 or 165/60-13 trailer tires nor is this a common trailer tire size.
I recommend the Provider ST175/80R13 Radial Trailer Tire part # TTWTRTM1758013C.... view full answer...
I checked with Thule and they assured me that the wheel tray of the Thule Elite Van XT 2 Bike Rack for Sprinter Rear Door # TH302043 would clear your rear spare as the wheel tray is actually located above the bottom of the window edge so it wouldn't come close to interfering with your rear mounted spare. view full answer...
The only option for a front hitch on your 2004 Dodge Sprinter is a universal hitch like the Draw-Tite # 41990-07. Unfortunately, nobody makes a custom fit front hitch for your van. This is a Class V weld-on hitch. It includes 7" brackets, but if you need longer brackets the # 41990-16 with 16" brackets is also available. We recommend taking this to a certified welder for installation. view full answer...
In order to use the Surco Safari Rack 5.0 Rooftop Cargo Baskets on your 2006 Dodge Sprinter you will need the Surco Safari Rack 5.0 Rooftop Cargo Basket for Yakima Roof Racks part # SPS5084-Y400 which mounts using the Yakima Round CrossBar System part # Y00101 and part # Y00411. This is the longest available roof basket we have for your Sprinter.
I checked with Surco and they do not list any of the Surco Safari Rack 5.0 Rooftop Cargo Baskets for Factory Rails like part # SPS5084-1101... view full answer...
For what you are wanting from the Hollywood Racks Destination E-Bike Rack # HLY66ZR your best option would be a pivot adapter like the Yakima part # Y02483 as it will give you the additional extension you are wanting as well as gives ability for the rack to swing out and away for rear door clearance like you are wanting. An extender won't allow your rear door style to still open. view full answer...
There are a couple of things you can do. First, you could convert the vehicle side connector to a 7-Way by using # 47435, which is just an adapter. This is going to be the easiest way to be able to use the 7-Way on the trailer without having to hardwire anything new on the vehicle.
The other thing you can do is cut off the 7-Way connector on the trailer and install a 6-Way to match the vehicle. This is more work and is not necessary.
Because the 6-Way connector you have now has a brake... view full answer...
If your 2008 Dodge Sprinter 3500 has a 144 in wheelbase and a factory step bumper, then the Curt Class lll Trailer Hitch, part # 13375 is designed for your van. This hitch has a 2 inch receiver opening.
This hitch has a 5,000 gross trailer weight towing capacity. This hitch is rated for up to 7,500 lbs if a weight distribution system is used.You will want to check your owner's manual or with your dealership to make sure you do not exceed the towing capacity of your van.
If you plan on... view full answer...
Because we haven't installed either hitch at our facility, I don't have the specific dimensions you're needing, but I can provide a ballpark figure that could be helpful to you.
When installed, the top of the receiver tube for either hitch will sit about 1 inch below the rear bumper of the vehicle, which means that the underside of the hitch will sit right about 4 inches below the underside of the bumper. The face of the receiver tube will protrude about 1-1/2 inches past the rear edge... view full answer...
I do have a roof rack option for a 2004 Dodge Sprinter with High Roof but there are no bolt-on options. Instead, you can install artificial rain gutter mounts on the side of the roof with the Thule Artificial Rain Gutters part # TH542 then use the Thule Square Bar System part # TH65BJ and part # TH712500. view full answer...
Because an ambulance will have a lot of equipment and in it and the the weight of people, the stock suspension will be compressed already. This can lead to the rough ride you described. Adding a Timbren system like # TMBRSP25 for a 2006 Dodge Sprinter 2500 or # TMBRSP35 for a 3500 will reduce the stress on the factory suspension and absorb road shock and reduce roll. This will provide a much better ride.
Both sets have a capacity of 8,600 pounds and are made of rubber. I have included... view full answer...
Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver # 75601 that you referenced does fit your 2007 Dodge Sprinter Van with a high top. view full answer...
Go To Results