Yes, the Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 # TH460R and Fit Kit for Thule Podium-Style Roof Rack Feet - 3101 # THKIT3101 are the correct parts to attach your Thule Aero crossbars to the factory roof tracks on your 2002 Ford Excursion. view full answer...
In order to use the Demco Classic Base Plate Kit with a Blue Ox Tow Bar you will simply need the Adapter for Blue Ox Tow Bars to Demco Classic Base Plates part # DM9523034 which works with all Blue Ox motorhome mounted tow bars like the Avail part # BX7420 rated for 10,000 lbs. view full answer...
Both of the 2" receivers on the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers # TLF1006 have the same tongue weight rating of 1700lbs and trailer weight rating of 17000lbs, Or 2000lb tongue weight rating and 20000lb trailer weight rating if you are using a weight distribution hitch. view full answer...
The closest grease seal we have to what you're looking for is the Grease Seal part # 10-9 which measures 1.500" I.D. x 1.987" O.D. It's commonly used on 2,700 lb axles. view full answer...
Yes, you are on the money with the fits. The Timbren Front Suspension Enhancement System # TFF350SD2 is a fit for the 2-wheel drive model of the 2003 Ford Excursion, while the Timbren Front Suspension Enhancement System # TFF350SD4 is a fit for the 4-wheel drive model of '03 Excursion.
I have added a link to a video review of this suspension enhancement for you to check out.
I do want to add that if you were looking for the rear suspension units from Timbren for your Excursion, they... view full answer...
Yes, you can use weight distribution shank # RP54998 in place of shank # RP54970. The hole spacing and size to mount the weight distribution head is the same on both shanks. view full answer...
I have another option for you but the Hayes Sway Master Electronic Sway Control System part HA81775 you were looking at has been discontinued.
Instead I recommend the Sway Command Electronic Sway Control System for Electric Trailer Brakes - 1 to 2 Axles # LC380605 which will work perfectly with the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR.
Both are great products and will serve you well. I have linked video on both for you to check out if you haven't already. view full answer...
Yes, the Edge Insight CS2 Comprehensive Gauge Display part # EP84030 has a feature called "Mileage Coach". The mileage coach allows you to view real time data such as miles per gallon (MPG) and average fuel economy. The display can be customized to show these features in a graph or other gauge display options.
I have attached a screenshot of what the tuner with these fuel economy features selected will look like for you. view full answer...
The tire step # HE4040 can be adjusted to fit any tire size up to a 22 inch rim so that would include your 37s since the 18 in the tire size is the wheel diameter. This step uses a strap to go around the tire for support rather than a rigid bar like most other tire steps which is why it can be used with larger tires. view full answer...
To install Firestone Ride-Rite air bags # F2251 on a 2001 Ford Excursion 4x4 the jounce bumpers would have to be removed and are not reinstalled. So not having the jounce bumpers actually saves you a step for the installation.
I also recommend using a compressor kit, # F2158, so you can add or remove air from the air bags from inside the vehicle. The kit is not required but makes load leveling a lot easier.
If the 5 inch block you mentioned means that the frame is 5 inches further away... view full answer...
As long as the Curt RockerBall has a 1 1/4 shank, like the # C29FR, you will have no issue installing it on the # C45340. With you using a ball that moves though, I highly suggest adding on the Roadmaster Quiet Hitch # RM-061. This will keep the # C45340 completely stabile while in use. view full answer...
The instructions for both of the front-mounted hitches that are a fit for your 2003 Ford Excursion, the Draw-Tite # 65022 and Curt # 31114 reference the blocker beam, saying you'll need to remove and then reinstall it when putting on either hitch. This means, of course, that these hitches are not direct replacements for the blocker beam but either could still be installed. view full answer...
Yes, you can use the Air Lift Upgrade Kit # AL52300 with the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88132 on your 2002 Ford Excursion. You will not have any issues installing this the parts together. We do also have the Upgrade Kit # AL52301 which will also include stainless steel roll plates and stainless hardware for mounting the air springs to the mounts. I have linked the instructions for the mount kits below as well as the instructions for the kit.
The Air Lift... view full answer...
The Timbren Suspension Enhancement, part # TFF350SD4, is intended to assist the front suspension you have on your 2001 Ford Excursion. This kit is for 4-wheel vehicles.
Suspension enhancement is intended to be used on vehicles with suspension that is in good working condition. It is not intended to be used as a replacement for your suspension.
I pulled one of these from our warehouse and took a couple of measurements. The spring measures 3-3/4 inches and the plate it is attached to measures... view full answer...
We would be more than happy to assist you with this question. If your wiring for your 2002 Ford Excursion, and it does not have a factory 7-way connection, you will need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # 118344. This T-One connector plugs directly into your vehicle's existing wiring, no cutting, splicing or tapping required.
This custom-fit T-One connector plugs into your Ford Excursion's wiring harness, which is located behind the driver's-side... view full answer...
Because the stock ride height has changed, the # TFREXC4 Timbrens for the Excursion would be ineffective for the very reason you mentioned. They'd be too short, and the suspension would compress a great deal before the Timbrens would make contact with the axle beam. However, we can still find a Timbren solution for you. With the wheels on the ground, measure the height distance between the top of the axle and the frame member where the factory bump stop mounts (see diagram).
If you can... view full answer...
I called my contacts at both Yakima and Thule, and they both advised against buying the Yakima Big Stack # Y04041 and the Thule Stacker # TH830 because of the 1/4 inch clearance under your factory crossbars on your 2001 Ford Excursion.
The best way to go to guarantee a fit of the kayak carrier clamps to your vehicle is to purchase the Thule WingBar Evo Crossbars - Aluminum - Silver - 53" Long - Qty 2 # TH711400. With the crossbars, you will need:
- Rapid Podium Feet for Thule Crossbars... view full answer...
I spoke to Demco, and unfortunately the Coupler # DM15349-52 cannot be mounted to the bottom of a frame. They went on to say that there would not be enough surface area for it to handle the weight when welded or bolted on.
That being said, the Ram 5-Position Adjustable Channel Bracket # CTA-CB6 is also rated up to 14,000 pounds and can be mounted however you need it to be. This would be a fully welded on part and would most likely need a few gussets added for structural integrity. view full answer...
The RoadActive Suspension kits, # RAS3621 for 2,000 pound capacity or # RAS3621-HD for 3,000 pound capacity, only fit the rear leaf springs on a 2001 Ford Excursion 4x4. There is no front option. So provided that your Excursion has rear leaf springs you can use either kit regardless of the type of suspension that is on the front. I have linked a video showing the features of the RAS systems. view full answer...
The Derale Stacked-Plate Engine Oil Cooler Kit w/ Spin-On Adapter (3/4-16 Threads) - Class III # D15651 will fit your 2000 Ford Excursion 6.8L V10. You will have the m22 x 1.5 filter threading so you will use that adapter which is included. view full answer...
Go To Results