Hey Michael, the correct picture of the etrailer base plate kit part # e96GV is the first picture which closely resembles the Demco.
I would agree this install requires the least amount of vehicle modification but there is some trimming required. Some of the air cooler wings do get trimmed which you can see in step 10 of the attached instructions. view full answer...
Hey Sargon,
What lights did you install on your Maverick? I see you were looking at the 3rd Brake Light Logic Module # PP20-702 and that you've ordered it. This module blocks out the turn signal so the light shouldn't blink and should be solid red while the brakes are being applied if wired correctly. How exactly is the light wired to your signals? view full answer...
Hey Robert, thanks for reaching out. Does your tailgate light hook up to a standard 4-flat trailer connector? If so, we do have a 4-flat harness that will fit your 2025 Ford Maverick Hybrid. The fit will just depend what kind of taillights you have so please check that and select from the following:
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C29PQ (for vehicles with non-LED lights)
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector... view full answer...
Hey Dalton, the trailer wiring harness installs are not known to cause hyperflashing unless maybe something was installed wrong. Does the trailer wiring actually function too? I would check to make sure you have the fuse installed in the harness and maybe disconnect and reconnect the connectors of the harness as that might clear out any issues with the harness. view full answer...
Hello again Mark; the Roadmaster Battery Charge Line Kit # RM-156-25 doesn't call for the installation of a fuse and Roadmaster doesn't find it necessary which is why you don't see it in the instructions. It comes with an automatic reset 15A circuit breaker so you don't need an extra one. You can add a 15A fuse if you really want to.
The reason you're seeing different positions on those diagrams is because they're two different connectors. Both are correct. One is the 6-way from your... view full answer...
Hey, Douglas! Happy to help.
There are no installation notes in the instructions for the Westin Hard Tri-Fold Tonneau Cover part # W83VM stating that it will not fit with the OEM bed liner. So I did a little digging on Fords website for information to see what they had to say. Ford states that their OEM liner will not interfere with installing tonneau covers.
You will have no issues installing and using the Westin cover on your 2024 Ford Maverick.
Are you planning to cover gear with... view full answer...
Hey Rich, thanks for reaching out. I am sorry to say the instruction manual for the Blue Ox Base Plate Kit # BLU86HR is not yet available online. I even reached out to my contact at Blue Ox and they said this particular base plate is still in production and they have not had a chance to upload a copy for online use yet. The instructions will come with the base plate, but since it is not yet available, I unfortunately have no way of getting those to you.
One thing that I can do is show... view full answer...
Hey Paul!
That Polar Bear travel trailer has electric brakes which require a 7 way round connector at the back of your truck. You already did the first step which is having a 4 way, but now you'll need to convert it to a 7 way with # ETBC7. This is very common for all vehicles, and it's not difficult to install. Check out the install videos I've linked below.
You'll also need a brake controller to handle the brakes and send the braking signal to the 7 way you will add. You can add the... view full answer...
Hey Karl, I would recommend following along with the install video I attached for the Roadmaster Brake Lite relay part # RM-88400 as it shows it installed on your 2024 Ford Maverick. It looks like we had to use a slightly different wiring configuration than what's in the standard diagram. It looks like he detailed the install process pretty well but he uses butt end connectors. view full answer...
Hey John, since 2024 and 2025 Ford Mavericks are different generations the base plate kits are different which means the install is different too. For example the etrailer base plate kit part # e96GV that you referenced fits 2025 and 2026 Mavericks (so far) and does not fit a 24'. I did attach a set of install instructions for the # e96GV for you to check out as well which will walk you through the entire process.
We also have the Demco part # DM38CV that fits the 25' models and based... view full answer...
Hey Thomas!
The Leer Hard Tonneau Cover # LE76MR will perfectly on your 2024 Ford Maverick, even if you have the side cargo rails installed in the truck bed. The clamp system can be maneuvered for easier installation and won't interfere with the rails. view full answer...
Hey Timothy! The brake controller port on the Sprinter is located under the driver seat. The connector picture below will fit into the port and allow you to install a brake controller like the Redarc Tow-Pro Elite # RED52CR. I also linked an installation video on a 2021 further down on this page which shows exactly where you can find the connector.
Are you wanting to tow a trailer or is this part of your flat tow setup? Flat tow brake systems do not require a brake controller in the motorhome. view full answer...
Hey Michael,
The torque setting for the mounting hardware of the Curt Trailer Hitch Receiver # C84BR is going to differ depending on the bolt size. For the M12 fasteners it would need 79 ft-lbs and for the 7/16” fasteners it would be 59 ft-lbs. These settings can be changed by the manufacturer in some cases so it's always best to look for the most current version of the installation instructions.
I've attached Ryan's installation video below to help walk you through the process, but... view full answer...
Hey Jack! Installation of the WeatherTech Custom Fit Hood Protector # WT47TK is pretty simple. You will prep the surface on your 2025 Ford Maverick and then stick on the hood protector using WeatherTech's Aeroskin.
Most people are probably installing this themselves since it isn't difficult, which means nobody has brought their vehicle in for us to shoot an installation video. I went ahead and attached some pictures from the instructions below for your reference. view full answer...
We are still waiting to get a set of digital install instructions for the Coleman Mach Under Bench AC units like the # CM82RR that you referenced. As soon as they are available we will have them linked on the product page but the kit does come with a set of printed instructions.
Here's a link to a similar under bench AC unit from Velit part # VE56QV that we also carry that will be very similar and close enough to give you an idea if that's what you are looking for. You might have to scroll... view full answer...
The installation instructions for the Air Lift 1000 Air Helper Springs for Coil Springs # AL42WQ which fit your 2023 Ford Maverick AWD are linked near the bottom of this page. view full answer...
Hello Michael, thanks for reaching out. We do have base plates that are compatible with the 2025 Ford Maverick Hybrid, such as the Roadmaster # RM87NQ. This will require extensive modification/removal of the lower air shutter. This will be the case for any base plate. Roadmaster does cover this step in their instructions which I have linked for you below.
Please let me know if there is anything else I can do to help. view full answer...
You can use a bluetooth brake controller like the Curt Echo # C51180 but one way or another you will have to add a 7-way to your Maverick. If you want to use the Echo you can install the # ETBC7L which comes with the adapter and 12V wire necessary to power the brake controller.
However, I highly recommend installing the # ETBC7 with the brake output wire and using an in cab controller. This will be more reliable and you won't have to worry about anything like pairing a phone and using... view full answer...
Hey Frank, thanks for reaching out!
The difference between the TowSmart Trailer Hitch Receiver # TS22VR and the Curt Trailer Hitch Receiver # C84BR is the tow ratings:
TowSmart
4,500 lbs towing
675 lbs tongue
Curt
4,000 lbs towing
600 lbs tongue
According to my research your 2024 Ford Maverick can only handle up to 4,000 lbs towing so there won't really be much of an advantage with the TowSmart higher ratings. But with that being said, I do like to have a little bit of cushion when... view full answer...
Pat, there is not a lock for the Half Tailgate Pad for Trucks # BDW79QB but the way it installs prevents it from being stolen. If someone were to steal this they'd need to drop the tail gate down and undo the straps holding it to the truck, which isn't realistic. view full answer...
Go To Results