The EcoHitch part # 306-X7284 is a fit for the 2014 Volkswagen Jetta SportWagen TDI. This particular EcoHitch is not designed with a removable hitch receiver. The hitch receiver is built into the hitch but it is still a concealed cross tube design. The only thing that is visible on the TDI is the 2 inch hitch receiver opening tube once installed. There is some fascia trimming required for the hitch receiver opening to fit through. The weight capacity of the hitch is 300 lbs of tongue weight... view full answer...
We do indeed offer a hitch fit for the 2012 VW Jetta Sportwagen TDI Diesel.
You'll want to go with the EcoHitch # 306-X7284. The hitch mounts behind the bumper cover, which conceals the entire hitch except for the receiver tube and the safety chain loops. view full answer...
I apologize for any confusion but the EcoHitch part # 306-X7284 does for sure fit your 2013 Volkswagen Jetta SportWagen. I attached a link on this page that shows where you can find local installers as well. view full answer...
At this time Class I trailer hitches are the only options available for the 2012 Volkswagen Jetta SportWagen. Most likely, because of the frame on the Jetta, there will not be a Class II option made available for this vehicle.
The only cargo carriers we have available for Class I hitches at this time are the open style carriers, see link.
I recommend the Curt Trailer Hitch, # C11474, to carry a cargo carrier behind your 2012 Jetta Sportwagen.
For your Class I trailer hitch receiver,... view full answer...
There's only one Class I hitch receiver confirmed to fit your 2013 Volkswagen Jetta SportWagen TDI- the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7284, and while it has the hidden crosstube, it has the same 2,000 lb towing capacity as the Curt # C11474.
You would also need a ballmount and hitch balls, for those I recommend the etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs # EBMK4. To power your trailer lights, I recommend the 4-Pole Flat, Hardwire Kit... view full answer...
The EcoHitch Hidden Trailer Hitch Receiver # 306-X7284 does in fact fit the 2014 VW Jetta SportWagen TDI, so you're good to go! The accompanying photo a customer submitted shows the EcoHitch installed on a 2014 Jetta SportWagen TDI, and the linked video shows an installation of the EcoHitch on a 2013 VW Jetta SportWagen TDI. view full answer...
The Malone AirFlow2 Roof Rack, part # MPG215, cannot be cut down.
However, these are a confirmed fit for your 2014 Volkswagen Jetta SportWagen. It's designed to fit around raised rails, so the 50" isn't what fits on the rails. It's actually less than that.
As long as the full 50" doesn't extend past your side mirrors (which it shouldn't) then this will be a good fit for you.
However, if you'd prefer a rack that doesn't extend past the rails, you can use the Rhino-Rack Vortex StealthBar... view full answer...
Yes, the EcoHitch Hidden Trailer Hitch Receiver # 306-X7284 that you referenced will work on your 2011 Volkswagen Sportwagen TDI. The installation will take about 2 hours with basic mechanical skills and tools, which is at the high end of the time spread of hitch installation. If you are not com
I attached installation instructions for you to check out also. If you are not comfortable with the installation, a local mechanic would be very comfortable with the process.
If you also need... view full answer...
I have exactly what you're looking for; you can use the Replacement Key for Thule Racks # THKEYN010 to unlock your VW roof rack made by Thule with a lock core with the number 010 stamped on the core. You can really ignore the N that sometimes goes in front of the Thule lock core numbers and focus on the 3 numbers to determine which keys and lock cores will match your existing setup.
If you need to change out the lock cores, you can use the Thule One-Key System Lock Cylinders # TH450200... view full answer...
From some research I did online it looks like the Salsa TimberJack you referenced in your question has a 15mm thru-axle.
To install your bike on the Kuat Trio Roof Bike Rack # TR02 you will need to remove the 9mm quick release skewer and place your bike's existing thru-axle skewer through the chrome cylinder on the Kuat Trio # TR02. Now place your bike on the rack, hand tighten the nut, and clamp the quick release lever down.
I attached the review video for the Kuat Trio Roof Bike Rack... view full answer...
The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7284 fits 2010 Volkswagen Jetta SportWagen if it is the TDI model, or even if it isn't. and I couldn't find anything. This trailer hitch is confirmed to fit the both.
As far as install videos go, we shoot videos as customer's bring in their vehicles to our Wentzville, MO location to have parts installed. So far (October 2023) we have yet to have a customer with a 2010 VW Jetta SportWagen come in for an install which is... view full answer...
We have some other similar roof rack options to fit your 2012 Volkswagen Jetta SportWagen but the Yakima RailBar Crossbars # Y00447-2 won't fit your vehicle.
Instead I recommend going with the Rhino-Rack Vortex StealthBar # JA7973 which has a similar look and quality plus it has been confirmed to fit the raised rails on your vehicle. view full answer...
Yes, you can use trailer wiring harness # C59496 on a 2012 Volkswagen Jetta SportWagen TDI. I have included a link to the installation instructions for you to view. view full answer...
We do have a wiring harness fit for your 2010 VW Jetta SportWagen TDI, and the correct fit is a hardwire option, which is the following part
- Curt Vehicle Wiring Harness # C59236 view full answer...
The EcoHitch # 306-X7284 has an installed height of 12 inches to the top of the receiver. With this being a 2 inch receiver, the bottom of the receiver would be slightly under 10 inches. The lip around the outside of the receiver opening is roughly a 1/2 inch, so you would be looking at 9 1/2 inches for total ground clearance. view full answer...
There is a hitch which is a fit for both the 2013 and 2009 Volkswagen Jetta SportWagen; the EcoHitch Hidden Trailer Hitch Receiver # 306-X7284 which has a 2" receiver opening. It will fit TDI models of the Jetta from either year and does not require the use of stabilization straps to secure accessories like bike racks and cargo carriers the way a Curt hitch does.
I've added links to videos of installs of the Hidden Hitch on a '14 Jetta for you to take a look at. view full answer...
Yes, the SportRack Vista XL Cargo Box, # SR7018, will work with the Thule WingBars on your 2010 Volkswagen Jetta SportWagen. To mount the bars use the Evo raised rail feet, part # TH710401, and either the silver 47 inch WingBars, part # TH711200, or the black, part # TH711220.
I've linked some videos for you to check out on the rack. It's on a different vehicle but it installs the same as on your VW. view full answer...
Yes, the Bearing Buddy Spindle Grease Seal # BB60005 can be used without a Bearing Buddy bearing protector.
However, it depends what's causing the issue as to whether or not this will solve your problem. I would inspect your spindle and make sure it's smooth and not damaged at all. It's possible the seal failure you're getting is from the seals not being on a good surface to start out with. view full answer...
For starters, the Curt Trailer Hitch Receiver w/ Euro Drawbar part # C114122 is not a fit for your 2014 Volkswagen Jetta SportWagen TDI.
The comparable option we have is EcoHitch Hidden Trailer Hitch Receiver part #306-X7284. view full answer...
The Air Lift 1000 Air Helper Springs for Coil Springs item # AL29PD are a universal fit. I spoke with my rep at Airlift. If the rear coil springs on your 2011 VW Jetta Sport Wagon measure just over 3-1/2" in diameter and 7" in length when fully weighed down these helper springs will fit. view full answer...
Go To Results