Yes, you will be able to mount your 225/75R16 tire with a 8 lug wheel on the etrailer Hitch Mounted Spare Tire Carrier # e98ZR. I have included an image below with your same size tire and an 8-lug wheel mounted on the carrier. view full answer...
You actually will not loose any ground clearance with Curt front mount receiver # C31075 installed on your 2017 Toyota Tacoma. The receiver will not be lower than the lowest part of the front fascia on the truck. I have included a picture showing the hitch installed. view full answer...
Yes, the Curt Trailer Hitch Receiver # C34UR does indeed fit your 2023 Toyota Corolla hybrid.
I have added a photo for you from a customer who was nice enough to send a photo of their Corolla hybrid using the Curt # C34UR. view full answer...
I compared ground clearance measurements for all of the 2" trailer hitch receivers we have for your 2017 Toyota RAV4 and found that the Curt Trailer Hitch Receiver part # C13406 has a great clearance from the ground to the top of the hitch receiver tube opening.
When we tested this trailer hitch on a similar 2017 Toyota RAV4, we found that the distance from the ground to the top of the hitch receiver tube opening was about 15". Please, please keep in mind that 2017 Toyota RAV4 we tested... view full answer...
For your 2008 Toyota Tundra, between the SumoSprings Solo Custom Helper Springs # SSR-610-54 and the RoadActive Suspension (RAS) Custom Leaf Spring Enhancement Kit # RAS4611TD, the better overall system is the RAS # RAS4611TD.
The reason for that is the RAS is an active system which continually reinforces your Tundra's original leaf spring suspension. The force normally put on its leaf springs, either when carrying cargo or towing a trailer like you are, gets transferred to the RAS Enhancement... view full answer...
For your 2023 Toyota Corolla Hybrid Sedan, I recommend the Curt Trailer Hitch item # C34UR. This hitch is custom fit and bolts to your Corolla with included hardware. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight. This is the highest capacity hitch available for your car.
I have linked an installation video below along with a picture so you can see what this hitch looks like installed.
If you are planning on towing... view full answer...
Since your Winnebago Solis 59P has a pop top, instead of using the Dodge ProMaster Van Adapter for Thule HideAway Awning # TH301650 with the Thule HideAway Awning for ProMaster or Sprinter # TH620001, I recommend using the:
-Thule HideAway Awning Adapter for Dodge ProMaster Cargo Van # TH308960 instead.
This kit will allow you to mount the Thule Hideaway awning directly to the side of your camper van, which I believe will work better with your setup, however this kit is not a no-drill kit. view full answer...
The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails.
With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you... view full answer...
I have two airbag kits confirmed to fit your 1986 Toyota Dolphin Motorhome. You can use either the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers part # AL88113 or the Air Lift LoadLifter 5000 Air Helper Springs part # AL57113. The Ultimate Air Helper Springs have an internal jounce spring that engages at lower air pressures to better absorb road shock and minimize bottoming out whereas the other does not.
Both of these airbags kits can handle up to 5,000... view full answer...
Yes, we do have the ability for you to add all of the parts for the Thule AeroBlade roof rack for your 2019 Toyota Highlander with one click of the button!
I have added links to both the Black option and the Silver option with takes you directly to the product page. Simply click the "Add to Cart" button and it will add the 60" bars # TH711520 (Black) or # TH711500 (Silver) along with the Rapid Traverse Foot Pack # TH480R, and Fit Kit # THKIT1803 for a complete roof rack system!
If you... view full answer...
I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine... view full answer...
Yes, the Curt Class V Trailer Hitch, item # C15398, will fit on a 2010 Toyota Tundra TRD, as long as it does not have a factory installed hitch on the vehicle. view full answer...
The CIPA Custom Towing Mirror # CM11401 that you're looking at is a fit for a Ram pickup. Since you have a 2021 Toyota Tacoma you'll need to look at a universal mount towing mirror as I still have yet to hear of a custom mirror made for a Tacoma (even on earlier models).
For your application I recommend checking out the K-Source Universal Dual Lens Towing Mirrors # KS3990 because they have a simple installation, use the dual lens feature for better visuals, and while they do shake during... view full answer...
I was able to contact B&W who confirmed on a 2012 Toyota Tundra the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1257 and the Firestone Ride-Rite Air Helper Springs # F2445 are compatible together. They did mention that was as long as the installation is inside and below the frame specifically.
Included are installation videos for both products. view full answer...
There are a pair of cargo baskets from Yakima which are confirmed to fit your 2017 Toyota Tacoma Double Cab with factory crossbars. The Yakima LoadWarrior # Y07070 weighs just 25 lbs, has dimensions of 44" long x 39" wide x 6-1/2" tall. The LoadWarrior with Extension # Y07070-74 is also available which adds 18" of length.
A wider option would be the Yakima MegaWarrior # Y07080 which is 52" long x 48" wide x 6-1/2" tall and weighs 35 lbs. The MegaWarrior with Extension # Y07080-82 is available... view full answer...
While we do not have any installation pictures of the Curt # C99FR on a 2020 Toyota Highlander yet, it has been confirmed by the manufacturer as a fit on your 2020 model.
If you're going to be towing with your 2020 Toyota Highlander you will need a wiring harness, ball mount and hitch ball to complete your towing package. For a wiring harness I recommend using the 4-Pole Trailer Connector and Installation Kit # C59496 since we've determined that the harnesses and converter boxes tend to... view full answer...
Yes, the Tekonsha OEM Replacement Vehicle Wiring Harness item # 22119 will fit your 2019 Toyota Highlander. This will provide you with a 7-Way connector and a Tekonsha brake controller adapter.
This wiring harness is custom fit and plugs directly into a port in the cargo area of your Highlander. The only wiring you will have to do is for the brake controller adapter. I have linked an installation video below.
For a compatible brake controller, I recommend the Redarc Tow-Pro Liberty... view full answer...
For your application you can use the Reese Pole-Tongue Adapter # RP58393 which works with lift brackets from all manufacturers that mount approximately 30" back from hitch ball. Since your Husky Center Line # HT32215 falls within that category and is rated for 6K (where the adapter is rated for 7.5K) this is the perfect option for you. view full answer...
The choice of oil bath or regular hubs is up to the manufacturer. They are usually found on higher capacity axles, though as you know there are some on lower capacity axles.
You can convert some hubs from grease to oil bath using a kit such as # XLPROLUBE1980KIT but for others it would not be possible without changing the hubs. This is because oil bath hubs use an oil cap that threads onto the end of the hub. Most regular hubs are not threaded so you would not be able to screw on an oil... view full answer...
Thank you for the picture! It looks like you have the square bar system from Thule that uses the Aero Foot Pack 400XT.
I spoke with my contact at Thule who said that the 400XT foot back was discontinued back in 2011 so they won't have a fit kit (the clamps for your vehicle) that would be compatible with both the foot pack and your 2018 Toyota Camry.
The current square bar system that fits a 2018 Camry includes an entirely new kit so you will need the 53" SquareBars # TH712400, the Evo... view full answer...
Go To Results