Was it always a tight fit or did it get tighter over time? It's not adjustable so I'm curious if maybe the ball portion of the coupler has dirt or something built up in it that is making it a tight fit. view full answer...
The RockyMounts TomaHawk Roof Bike Rack for Fat Bikes - Wheel Mount - Clamp On - Aluminum # RKY1222 will absolutely fit the Rhino-Rack Vortex Aero Blade Crossbars like # RRVA118B-2 that are 3-1/8" wide x 1-3/16" tall. I do recommend using the lock cores # RKY0332 to secure your bike to the carrier and your carrier to the crossbars. view full answer...
What vehicle do you have and does it seem like it's totally the wrong design or maybe some of the bolt holes don't line up properly? view full answer...
What you need is the Thule XADAPT2 AeroBlade and Xsporter Load Bar Adapter for Roof-Mounted Carriers # Xadapt2. This adapter will allow you to mount your Thule 599xtr Big Mouth bike rack on your 2022 Subaru Legacy Aero crossbars. view full answer...
The Draw Tite Hitch part # 36493 that you referenced is also a 1-1/4 inch hitch so your Thule Roadway part number 912XT that is designed for a 1-1/4 inch hitch would work well in it.
I attached an install video for the hitch for you to check out as well. view full answer...
There is no Class III receiver hitch available for the 2004 Subaru Legacy. We do have an adapter that will fit the class II 1-1/4 inch receiver hitch, # 80303 that would allow you to use a 2 inch accessory in your class II receiver.
When using an adapter, you must take into account that your tongue weight will be reduced by 50 percent so the weight of your bikes and rack could not exceed 100 or 125 pounds, depending on which hitch you purchase. I have linked below to the hitches we carry... view full answer...
I spoke to my contact at Curt and he sent me a complete dimensional drawing for the Curt Hitch part # C12270 that I attached for you to review. view full answer...
Hey Jim, thanks for reaching out!
The only hitch we have to fit a 1999 Subaru Legacy Outback Wagon is the Curt # C12270 which is a Class II hitch with a 1-1/4" receiver.
The wording on your title can be confusing so I'm adding a dimensional drawing of this hitch that Curt sent us. You can use that and the installation video I've linked to compare it to your vehicle to see if it will fit or not. view full answer...
I have a great roof rack solution for you. Judging by your previous searches, it looks like you are looking for a two-crossbar system for your 2015 Subaru Legacy. Unfortunately, I confirmed with Rhino-Rack that the Rhino-Rack RS 2500 Roof Rack for Naked Roofs - Vortex Aero Crossbar RRRS143 does not fit your vehicle. Even if it did fit, this is only a single crossbar.
With that being said, we do have a great similar system that uses the Vortex crossbars with the same flush design. That... view full answer...
Hello Chase, thanks for reaching out. You are correct there is no way to use the Thule Traverse feet on the 2015 Subaru Legacy. The only option would be to use the Thule Evo Clamp Feet # TH710501 and the # TH145193 fit kit.
As far as the crossbars, it sounds like you already have some you want to try to re use, correct? If you have the new-style Thule square bars that have a bottom channel, then can work with the Evo Clamp Feet. A 53" bar is recommended for your vehicle, so please make... view full answer...
Hey Jim!
Cam-Action latches like the Polar # 158-101 you referenced are designed to be used with a standard padlock like the Trimax # TMX82SR. The puck lock you're looking at has a 3/4" max height opening in the back so it's going to be cutting it really close and I don't think it will really work for you.
If you're really wanting to use a puck lock like Trimax # TMX96RR then you'll need the Trimax Latch Kit # TMX28ZR instead.
Have you been using the puck style already, or do you just... view full answer...
Hey Andrew, unfortunately the Memory Mount Clamps for Inno Rooftop Cargo Boxes # INBRP9 are not going to work with your older Inno LowDown Cruiser.
Your only option to retro fit it is to drill holes in your cargo box and use the U-bolt kit # TH05603. You'd also need sealant # LT37467 to seal your old holes. view full answer...
There are no hitch adapters that offer just rise for a 1-1/4" hitch. What bike rack do you have? If it is one we carry we may be able to find you something to convert it to a 2" rack, or there is also the possibility of a new rack with a shank that has rise. If you let me know what rack you have I may be able to find a solution for you. view full answer...
Hey Crystal, the etrailer Class III hitch part # e25TR is a great option for a hitch for your 2024 Subaru Legacy sedan. I like it because it has great towing capacities, is mostly hidden, and is the 2 inch hitch size which is the most common/popular for hitch accessories. What will you be using the hitch for? view full answer...
Hi David; the Roadmaster Crossbar-Style Base Plate Kit # 909-1 instructions are linked a little further down on this page. You can also find them below the product description on the actual product page.
Do you have the rest of the parts picked out to flat tow your 1997 Subaru Legacy? view full answer...
How you transport is really up to you. Your 2018 Subaru Legacy is still extremely new, so fits are being added all the time, and Subarus have a reputation for being incredibly flexible.
If you want to go with the full rack, or have other possible items to carry like bikes, kayaks or cargo, I recommend using a Yakima roof rack system. This has the added benefit of letting you use a wide variety of accessories and adds a more rough and tumble look to the car.
To add this kit to your vehicle,... view full answer...
Hey Danny,
Yes, you can use the Curt Trailer Hitch Receiver # C12298 on any 2010-2014 Subaru Legacy, though not Outback. The bolts don't have to go back as they came with the hitch but you should definitely not reuse the hitch bolts or any portion of the hitch mounting hardware as it is a one-time use and re-using it damages its integrity and could be dangerous. So you will need the Replacement Hardware Kit for Trailer Hitches # RHK.
On that page, just put "C12298" in the "Hitch Item... view full answer...
Hello Jim, thanks for reaching out. We do have a few options for a winch with a wireless remote. If you are wanting something with a wire rope, I recommend the following:
- Bulldog Winch Standard Series Off-Road Winch - Wire Rope - Roller Fairlead - 9,500 lbs # BDW29QB
I have also provided a link that will show you our full selection of winches with wireless remotes.
Were there any other features you were wanting? Let me know. view full answer...
Go To Results