Hello Dennis. The trim piece for the High Pointe Built-In Convection Microwave measures 24" wide by 17" tall. I made a diagram for you which I have included below. view full answer...
Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th wheel hitch. It's going to provide a more secure connection and is super convenient.
There's only two B&W Companion 5th wheel hitches that are going to work with the Ram puck system. One is a slider and one is a standard 5th wheel hitch. They... view full answer...
Good question Mel, and I don't blame you for being confused since there are a lot of options and there is probably more than one right answer. The correct pivot arm position will depend on the clearance between the nose of the camper and the cab of your truck. I have included some pictures below to help illustrate.
If your truck is a long bed, clearance should not be an issue, and you will want to use the one of the centermost positions. Basically, you want to keep the Kingpin centered... view full answer...
Hello Gary, thanks for reaching out. The etrailer Anti-Rattle Hitch Collar # e38FV is only for a 2" receiver. It will not work with the 2-1/2" hitches. We do hope to make a version for a 2-1/2" hitch in the future, but that is a good ways down the line.
If you need an anti-rattle device for a 2-1/2" hitch we do have the Roadmaster Quiet Hitch # RM-062 or the Blue Ox Immobilizer # BX88225. Both are U-bolt style ant-rattle clamps.
just comment below and let me know if you have any questions... view full answer...
The Air Lift Air Helper Spring Cradles # AL59DQ are not going to be compatible with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs # AL57589 on your 2021 Ram 2500. This is due to the 7500 springs being larger in diameter than the 5000 springs. So you would need to use the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88289 on your truck. Do note the cradles will add 0.83" to the height of the air springs. You will need to determine how much rear lift was added to... view full answer...
The things that the 18K Demco Hijacker # DM8550034 and the 18K SuperGlide have in common are that they both offer 14" of travel, they are both automatic sliding 5th wheel hitches, have 2-point pivoting hitch heads, are compatible with industry standard base rails, and they are both rated to tow up to an 18K trailer. Both 5th wheel hitches come with a 5-year limited warranty as well.
Although they both have the single-jaw system to lock the king pin into place, the SuperGlide hugs it against... view full answer...
We do a couple replacement shear springs available for you that may work depending on what you're needing.
For instance, we do carry the Replacement #75 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems # MR96UR, which will work with the MORryde LRE4000 Series trailer suspension systems with axle ratings between 8,500 and 10,500 lbs.
We also carry the Replacement #20 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems # MR79UR.
This spring will work with... view full answer...
Hey Jeff, for your Ram 2500 that has the factory gooseneck hitch setup we do have an offset ball that would work great with the Gen-Y part # GY83XR which has a 5 inch offset to help with turning clearance. The engineers for this were pretty clever and they use two of the forward pucks as anchors to prevent the ball from rotating. view full answer...
Hello Rhys, I can definitely help with this. First, I will start by saying that trucks with the Rambox really are not ideal for towing a 5th wheel camper. It can be done, however I cannot recommend using the Turnoverball, offset ball and goosebox combination that you mentioned. The issue with Ram Box is that it limits the ability of the pin box to rotate in the truck bed. This will drastically decrease your turning clearance and the goosebox would not clear the Ram box on turns.
The only... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15809 is a great option for your 2011 Ram 2500 as long as you are okay with a 24 inch hitch extension like # C45048. This will give you a gross trailer weight of 8,000 lbs when used with weight distribution, so a weight distribution system would be required.
Your other option is to use the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers # TLD1102 instead... view full answer...
I wish you would have asked this question prior to your purchase of the Curt Extender # C45791, because this extender will not work for your application. It is rated for the 3,500 lb total trailer weight towing capacity and because it is an adapter will also decrease your tongue weight rating of your trailer hitch by 50%.
Instead, you may want to consider the Brophy Ball Mount for 2" Hitch # BH20. This ball mount is capable of towing 10,000 lbs and has a measurement of 13-1/4 inches... view full answer...
Shane, sorry to say we don't have a replacement hardware kit by itself for the B&W Turnoverball # BWGNRK1313. The hardware actually does not look like it's offered by B&W themselves, unfortunately. What I did instead is attach a picture of the hardware list which you can use to source all of this on your own.
I know it's not the most ideal situation, and it blows my mind that they don't just offer the hardware, but it is what it is. But, if you need anything else, feel free to let me know... view full answer...
Hey Tyson! The Air Lift LoadLifter 5000 Ultimate Air Helper Springs item # AL88289 have a built in jounce bumper similar to a bump stop, whereas the item # AL57289 does not. These are helpful if you want to run your air bags with little or no air pressure in them.
Both the Air Lift item # AL57289 and item # AL88289 fit the 2015 Ram 2500 2WD and 4WD models. They are compatible with in bed hitches as well.
For an air compressor, I recommend the Air Lift WirelessAIR Compressor System item... view full answer...
The reason that the valve on the Connector Kit # DZ97962 would need to be closed with the Auxiliary Tank # DZ91752X installed on your 2016 Ram 2500 is because DeeZee didn't design it to work that way and it may cause check engine alarms to go off. I spoke to my contact at DeeZee who confirmed this.
I also asked her if they had heard of any issues with Ram models that don't have the fuel cap filler tube and she said that they haven't heard anything about this.
This auxiliary tank is great... view full answer...
The fifth wheel hitch I strongly recommend for your 2018 Ram 2500 with the factory puck system is the B&W Companion # BWRVK3670.
The Companion is considered by many to be the highest-quality fifth wheel hitch available. It features dual jaws which are a full 1" thick to provide complete contact with your king pin so you can have faith that your connection is completely secure. I've added a picture of the jaws so you can see for yourself how impressive they are.
The Companion is also... view full answer...
Hey, Michael! Thanks for reaching out.
Yes, we do carry a front mount hitch for your 2025 Ram 2500 diesel. The EcoHitch Hidden Front Mount # EH37FR will fit both diesel and non-diesel models, but it will not fit the Power Wagon models. There’s no drilling required for installation, but you will need to make modifications to both the front air dam and the intercooler shroud.
What are you planning to mount on the front hitch? view full answer...
Hey Peyton,
Yes, those things are all indeed compatible as the crossmember won't come into contact with the over/under kit. As for the correct kit, that depends on the size of your Keystone Cougar's axles. For 2-3/8" diameter axles use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00; for 3" diameter axles use the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00.
Then you can use the SumoSprings but you need to have between 5-5/16" and 6-1/2" of clearance... view full answer...
Thanks for the picture and information Charles! The Gen-Y Hitch Nomad item # GY37ND and item # GY72SB will indeed replace the factory Rhino pin box on your Grand Design.
The difference between the Gen-Y Hitch Nomad item # GY37ND and the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY72SB is all about comfort and convenience. The Nomad is as basic as you can get. It has a SnapLatch coupler system, which automatically locks when lowered onto the hitch ball. There is... view full answer...
Hey Greg, welcome back! The Go Power Overlander Expansion Kit - 200 Watt Solar Panel item # 34282182 includes the Overlander panel. It's a bit different than your current Go Power GP-PV-200M panel, however it is compatible.
The solar panel included with the Go Power Overlander Expansion Kit item # 34282182 is a 200 watts with a slightly lower 9.57 amps. Yours has 9.62 amps. It measures 59-1/8" long x 26-5/16" wide x 1-1/2" deep which is identical in size. The included connectors will... view full answer...
Hey Neal, we have confirmed with Curt in the past that the front hitch part # C73ZV is confirmed to fit your 2022 Ram 2500 Power Wagon. What are you planning on putting in the front hitch? view full answer...
Go To Results