LED type trailer lights use very little power, about one-tenth the amount required by standard incandescent light bulbs. This can cause some wiring systems to not "see" the trailer lights because their current draw is so low. In some cases a wiring harness may not function correctly if used with LED lights unless a load resistor is installed at each LED light unit.
We offer 2-piece ceramic load resistor kit # DI34ZR which will allow your harness to operate properly with LED trailer lights.... view full answer...
Hey Polar, yes the Rhino Rack roof rack part # RLZ01-DC does fit your 2012 Ford Transit Connect. I am not sure why they didn't list a fit for this. view full answer...
You could run wiring in anyway that you like to a "solar generator" or power station, or other device or battery able to provide 12 volts at two amps. You would only need to attach an appropriate plug to match your device outlet.
If you would like to email me the brand and model number of your device I could advise what plug might be needed. Depending on how far away your device is, you may also need some additional cable like etrailer # 10-2-1. view full answer...
Hey Brad, for your 2019 Ford Transit Connect Long Wheelbase XLT we only have a larger platform rack option available with the Frontline Runner Slimline II part # FR53FV. This would work really great to carry all the things you mentioned and basically provides full coverage of the roof so you'd be prepared for just about anything you'd need to carry up there! view full answer...
It sounds like your 2016 Ford Transit Connect has factory flush rails that run front to back. To add a rack to those rails you will need to look at roof rack options instead of the ladder rack section. The only problem is that the roof rack options are rated lower than the ladder rack # TH29611XT.
The most economical option is a Thule square bar system using the following parts:
SquareBars # TH712400
Podium feet # TH460R
Fit kit # THKIT3032
The roof rack itself is rated for 165 pounds. view full answer...
Hey Tom. The Front Runner Slimline II Platform Rack item # FR53FV attaches to four holes on each side of your 2019 Transit Connect XLT's roof. According to the instructions, I attached below, these holes are covered by plugs. However, they're supposed to be threaded to accept a standard 8mm hex bolt.
If the holes in your roof beneath the plugs are not threaded then the item # FR53FV will not work for you and I do not have a solution that does.
After looking at the instructions are you... view full answer...
Hey Pam, thanks for reaching out to us!
I recommend going with the etrailer Trailer Hitch Receiver # e77AR for your 2020 Ford Transit Connect because it has a matte black finish that is more durable than the standard glossy black finish on other hitches, and the receiver sits about flush with the rear bumper so you'll have to literally be hugging your Transit to get injured by the receiver (see attached photo).
Then for a carrier it sounds like you're wanting something like the Flint... view full answer...
Hello William, thanks for reaching out. I have heard of this happening before. What you can do is enlarge the holes slightly with a drill or a file or something. Shouldn't take too much to open the hole up enough to get the bolt thru. view full answer...
Hey Jenni, so I attached an install video for the custom trailer wiring harness part # 118585 that fits your 2013 Ford Transit Connect as well as a link to the install instructions. The power wire can definitely be routed underneath the vehicle if you'd like as well. view full answer...
I hope I got the right measurement for you Roberto. I included a image with the measurement points that I took on the CargoBuckle Ladder Rack Straps # CB32MR below. If you are needing a different measurement please let me know. view full answer...
Hey, Luis,
I'll need to know how wide and long of a tray you're wanting to put in the back and how much space is really available. I'm assuming your model has the flat rear cargo area with four tie-down points? Personally, I'd keep the tray within those tie-down points so that you can still use them if needed. Let me know what you measure and what your goal is and I'd be happy to find the right fit. view full answer...
Hey David, it's great to hear from you again!
You can use the Hopkins 4-Diode Universal Wiring Kit # 38955, but I honestly like the diodes that come in the Roadmaster 4-Diode Universal Wiring Kit # RM-154 better. The Roadmaster diodes are just more durable and have better connections than any other diode kit on the market, so I just feel more ease with them.
I know the price difference is a bit much, but it's really up to you which wiring kit you want to go with.
What are you thinking? view full answer...
I spoke with Rhino-Rack and was able to confirm that both the part # RRQMFK11 (30mmx25mmx5mm) and N057-BP (24mmx21mmx4mm) are compatible with the Rhino Rack Factory Roof Tracks. If you're looking to mount a set of crossbars to these tracks, you'll need a few items which I have attached for you below.
Rhino-Rack Quick Mount Legs part # RRRLT600 (Comes With RRQMFK11)
Rhino-Rack Vortex Aero Crossbars part # RRVA180B-2
If you need a different size crossbar, you can choose this from the list... view full answer...
Hey Travis, thanks for reaching out. The best platform option for your 2022 Ford Transit Connect XLT is going to be the Front Runner Slimline II Platform Rack # FR53FV. This is a 109-1/8" x 58" platform so you get full coverage of the roof. It connects directly to the fixed mounting points or "slots" on the roof. The crossmembers on the platform have T-tracks which you can use to mount accessories like a solar panel or any other track mount accessory.
Personally, I do prefer the FrontRunner... view full answer...
Hey Jim! You will have to modify the VanRug Custom Floor Mat for Cargo Vans # VRTC14L to accommodate the seat mounts. These are all designed for the cargo van configuration so they aren't cut with seats and seat mounts in mind. view full answer...
Hi Stuart,
The Front Runner Slimpro Van Roof Rack (117-1/8" long x 57-15/16" wide) # FR62VV, is a great match for your 2019 Ford Transit Connect.
The nice thing is that it installs using the existing holes in your roof, no drilling needed. I’ve attached a couple of images from the instructions that show the process. You’ll just need to remove the rubber plugs in the roof, and then the rack mounts with the included brackets and hardware: 10mm plastic spacers, M8 x 35 button head bolts,... view full answer...
It sure does Dale! Our etrailer Hitch item # e77AR comes with 4 fishwire tools actually. There's two different sized bolts you need them with so you get two for each size. I attached a picture below of the installation hardware you'll be receiving.
Our etrailer Hitch item # e77AR is custom fit for the 2022 Ford Transit Connect. This is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight.
I linked an installation video below... view full answer...
It sounds like you could be referring to either Replacement Operator Mechanism part # MA10-20281K-1AF or Replacement Lift Arm part # MA10-20222KS which are both fits for a MaxxAir 7000K Roof Vent Fan. If you need a different part let me know but these are all that's available for the lifting mechanisms aside from the Replacement Lift Motor part # MA10-20270.
If you're looking for a less complicated replacement that would be the MaxxAir MaxxFan Mini Roof Vent part # MA00-04401M which is... view full answer...
We have had this come up a number of times before and when speaking to our contact at Fan-Tastic Vent regarding your model 6600 vent with the 417RF remote, they did confirm that the current model remote # FV9068-81 will not work with your vent model. They have also informed us that the original remote for your vent is no longer available.
In order to utilize a remote control, you would need to upgrade the vent assembly to the Fan-Tastic Vent Roof Vent # FV807350. view full answer...
For your 2022 Ford Transit Connect we have the Tekonsha T-One Vehicle Wiring Harness # 118613. This harness will give you a 4-way flat connector that most small trailers use for the lights on the trailer. I have linked an installation video below for this harness on a 2020 Transit. A mounting bracket # 18144 can be used to attach the 4-way connector to the mounting tab on a Draw-Tite Max-Frame Trailer Hitch Receiver # 75852.
If you have a larger trailer that has a 7-way connector you... view full answer...
Go To Results