Hey Darrel. The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks item #RM-2460-2580 is without a doubt the best upgrade you can make to your Grand Design's suspension system. It's going to come with everything you need to swap out…
Hey Tim, Yes! The flange on the Vitrifrigo RV Refrigerator #VT56FR is removable which allows you to choose between a surface mount or recess mount. You can also adjust its position before installing. What kind of trailer are you wanting to put this…
Thank you for the images Barb, but you are going to have to take a couple measurements to verify what is going to work best for your exact situation. It looks like you have a 2019 Toyota Tundra with the B&W Turnoverball Underbed Gooseneck Trailer…
Hey Alfred thanks for stopping by! So to get your Stehl tow dolly ready to go with brakes you're also going to need a hub/drum assembly, with #AKHD-545-35-EZ-K, a set of brakes #AKEBRK-35-SA, a breakaway kit #3802346, and a brake controller like…
The Replacement Roof Vent for MaxxFan Plus Roof Vent w/ 12V Fan - Powered Lift - 10 Speed - Smoke #MA99FR you referenced will use the Replacement Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent #MA59FR. This is a wired remote that mounts to the…
Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…
We have sold quite a few of the Pop and Lock tailgate locks like the part #PAL5409 all over the country and have yet to hear about one of them snapping in cold weather. This would work well for you and would not cause any issue.
The Pop & Lock Custom Tailgate Handle with Lock #PAL5409 is compatible with your 2015 Toyota Tacoma whether you have a backup camera or not so you're good to go!
Hi David! All the mounting hardware is indeed included with the Roadmaster Direct-Connect Base Plate Kit #RM42FR (see the included picture). You will just need your own tools for the install. Unless you borrow someone else's tools or have someone…
If your Tacoma is a 2-wheel drive, the Timbren Rear Suspension Enhancement System, part #TTORXR will work great for you. This system replaces the axle bump stops on the frame of your truck and requires no drilling for installation. This will increase…
The best spot to install the Trailer Connector is on the bed sidewall on the drivers side, between the wheel well and the tail gate. We have an installation video showing this Curt 5th Wheel and Gooseneck Wiring Harness #C56000 being installed on a…
