3" x 3" LED utility light produces a bright white light. Flood beam illuminates a wide area. Black powder coated aluminum housing is rustproof. Impact-resistant polycarbonate lens. Flange mount with included hardware. 6 Diodes.
Features:
Specs:
Lumens are used to measure the amount of usable light that is put out by a light source. Raw lumens represent the number of lumens that the manufacturer claims the LEDs are capable of producing. It does not include the light's drive method or the amount of light lost from the lens or reflector. Effective lumens take these factors into account and represent the number of lumens that are actually produced by the complete light assembly, not just the amount of light that the diodes are capable of producing. This light has a 1,800 raw lumen capacity and produces 780 effective lumens.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna take a look at the Optronics three-inch square, black aluminum flood beam LED work light, for a quantity of one. Now this square work light will provide bright, white light for industrial, agricultural, and recreational applications. It does give off a flood beam, which is great for seeing out in front of you and even off to both sides. It does use the durable SMT construction, which is Surface Mount Technology, on the LED circuit board. This will help better withstand shock and vibration, and allows for improved heat distribution.The LEDs they use are great replacements for incandescent lights because they'll last 50 times longer. They are more efficient, provide brighter light with less power output.
So no bulbs to replace, no brittle filaments.This is a durable, water-resistant construction. It has a nice black, powder coat, diecast, aluminum housing, which is rust-proof. The lens on it is a tough polycarbonate lens, which is impact-resistant. And this light meets the IP65 rating for protection against dust and moisture. This is compatible with 12-volt DC systems.
It's a very easy installation. It comes with all the mounting hardware you need. It's a recessed flame style bracket and the bolts to install it. It does have, on the back here, a 16-inch long 16-gauge power lead and ground wire.Now a few specs on this. The light output, the Raw Lumen output is 1,800 Lumens.
The Effective Lumen output is 780 Lumens. It does use six diodes. Again, the lead wire length, we mentioned, is 16 inches long. The input voltage on this is 12.8 Volts DC. The power draw at the 12.8 Volts DC is 1.4 Amps.And I do wanna give you some dimensions on this.
Now the light, just by itself, is gonna be, as we mentioned, three inches by three inches by about two and three-quarter inches deep. Overall, including the mounting flange, length on it, edge-to-edge, is gonna be right at four and three-quarter inches by three and five-eights inches, and as we mentioned before, the depth is gonna be right at about two and three-quarter inches deep.Now what I'm gonna do is plug this in, hook this up to some 12-Volt power just to show you how bright it is and the pattern. So go ahead and take our ground and we'll hook that to the black wire. And we'll go ahead and take our power and hook that to the red wire. And we'll go ahead and turn on our 12-Volt power. And you can see with it on, very bright light. I'm gonna go ahead and turn off the overhead lights. And with the overhead lights off, you can see how six diodes give off a very bright light. And you can see the flood beam pattern it gives off. Go ahead and turn back on the overhead lights. Go ahead and turn off our light.But that should do it for the review on the Optronics three-inch square, black aluminum flood beam, LED work light, for a quantity of one.
perfect for project
Light is nice and bright.
Great service. Ordering was simple and efficient
Installed these on my 2018 Chevy Silverado. Could not be happier with the final product. Exactly what I wanted
The product was DOA, DEAD ON ARRIVAL, rather than just send a new one etrailer.com has thrown me under the bus by making me go back to the manufacturer as a warranty issue. Naturally the manufacturer has not responded to my email and picture proving a dead product. I'm always looking for a way to not shop [online], but with service like this how can I? [online] would have solved this instantly. GOODBYE ETRAILER HELLO [online], I'M BACK!
great product! used them for trailer backup at nite -- plenty of lite.
These are great ! Very good quality. I installed them on my tractor and now I can see ! Price is very good too ! Thanks etrailer !
Shipping was fast and exactly what i ordered. Came in two boxes
We rebuilt our pontoon trailer with no problems whatsoever. Great product. still mounted and still working very bright.
Excellent Product - Well Made
Using as work area / bar b que lighting. Does the job perfectly.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.