1. Wiring
  2. Hopkins
  3. Trailer Connectors
  4. Vehicle End Connector
  5. 4 Flat
  6. Plug Only
Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End

Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End

Item # HM48190
lowest price pledge
Retail:$24.44
Our Price: $9.34
You Save: 62%
Wiring
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.17 lbs
Quantity: 
In Stock
HM48190 - 4 Flat Hopkins Wiring
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Replace a damaged 4-way flat, vehicle-end connector in just seconds with this Quick-Fix plug. Simply remove the damaged plug, insert your wires into the new plug, and press closed to secure the wires. Built-in LEDs confirm proper connection. Lowest Prices for the best wiring from Hopkins. Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End part number HM48190 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (46)
  • Q & A (26)
  • Videos (1)
  • Photos
  • Why etrailer?

Hopkins Wiring - HM48190

  • Trailer Connectors
  • Vehicle End Connector
  • 4 Flat
  • Plug Only
  • Hopkins

Replace a damaged 4-way flat, vehicle-end connector in just seconds with this Quick-Fix plug. Simply remove the damaged plug, insert your wires into the new plug, and press closed to secure the wires. Built-in LEDs confirm proper connection.


Features:

  • Plug replaces a damaged 4-way flat, vehicle-end connector in seconds
    1. Cut off the broken plug
    2. Insert existing wires into new plug
    3. Press the cover on the new plug closed to secure the wires in place - no wire stripping required
  • LED test lights confirm that electrical connections have been made
  • Integrated dust cover protects the terminals from the elements
  • Wire-retention plate ensures a secure installation
  • Easy-pull finger grips make it simple to plug in and unplug the connector - reduces strain on wires
  • 3-Year limited warranty


48190 Hopkins Endurance Quick-Fix Replacement 4-Way Flat Connector w/ LED Test Lights - Vehicle End




California residents: click here


Video of Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Hopkins Wiring - Trailer Connectors - HM48190 Review

Today, we'll be reviewing part number HM48190. This is the Hopkins Endurance Quick Fix Replacement 4-Way Flat Trailer Connector with the LED test lights. This plug is designed to replace a damaged 4-Way Flat vehicle and connector in just a few seconds. All you got to do is cut off the broken plug, insert the existing wires into the new plug, and then press the cover on the new plug closed, to secure the wires in place. No wire stripping is required. Just cut the LED test lights up here. That's going to confirm the electrical connection has been made correctly. It also has the integrated dust cover that's going to protect the terminals from the elements.

It's got a wire retention plate that's going to ensure secure installation. It's got the easy pull finger grips that make it simple to plug in and unplug the connector, that really helps reduce the strain on the wires. In that housing, you have 2 little mount holes you can use to secure this to your application. It's also going to come with some terminal grease for your installation. That's going to do it for today's review of part number HM48190. This is the Hopkins Endurance Quick Fix Replacement 4-Way Flat Trailer Connector. .


Customer Reviews

Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End - HM48190

Average Customer Rating:  4.8 out of 5 stars   (46 Customer Reviews)

Replace a damaged 4-way flat, vehicle-end connector in just seconds with this Quick-Fix plug. Simply remove the damaged plug, insert your wires into the new plug, and press closed to secure the wires. Built-in LEDs confirm proper connection.

- HM48190
by:

My electrical connection to my trailor works very well with this connector. 262702


Comments
I have used this product for a year now and it works as good as it did when I purchased it. Great product.
Larry F - 06/20/2017

25210

- HM48190
by:

This connector was just what I was looking for to avoid doing any soldering or the entire harness. Was quick and easy to install. As a bonus, delivery was expected on a Mon., got it on Fri. Thanks! 445476


Comments
Worked good for a short time then I noticed one of the lights out on it. Tried getting better contact then it never worked again so I just took it off.
Tom M - 10/24/2018

45001

- HM48190
by:

This connector is much more robust than the standard ones. It was simple to install and the bolt-together cover keeps the wiring firmly connected. I have had no problems with either of my trailers. The end cap stays on and keeps the contacts clean. Finally, I like the red LEDs that tell you at a glance which wires are live. Trailer wiring the way it should be. 616008



- HM48190
by:

I broke the ground post off the hitch connector on my 2008 Toyota RAV4 and I bought this replacement connector on your website. It was very easy to just clip the four wires on my broken connector and insert the wires into this replacement connector. The replacement connector has two screws to open it up and then you just push the four wires into each push "V" connector. No stripping wires or terminal screws. The LED lights work just like the description on the website which made it easy to confirm the connections were good. The overall project took about 30 minutes. The only problem I had was that the two bracket holes didn't match the holes on my tow bar, so I could only use one screw to re-attach the new connector. I used electrical tape to secure the wires so they wouldn't hang down. 574167



- HM48190
by:

These male and female 4 wire pigtails are advertised as "quick fix" connectors. I use these connectors so that I can make my own pigtails. Sure, you can buy a pre-wired pigtail and add on to it by splicing the wire with butt connectors, however by using the quick fix connectors, you eliminate the need for the butt connectors and an additional possibility of a place to have a problem such as corrosion. The connectors are easy to use, reliable and you do not have to use the conventional 4 flat wire. I have used these connectors with individual wires as well as a round, 4 conductor wire. In addition, these connectors are a newer version with screws to connect the plug together rather than a snap connector. This version also makes them easier to take apart in case of a malfunction. 716016



- HM48190
by:

I recently had a need for the Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End - HM48190 to replace the faulty one on my van. It was easy to find what I needed on the site and the price was comparable to other sites I had visited. I decided to go with etrailer because I had previously ordered the hitch through them. I appreciated the fact that an email was sent out confirming that they received the order as well as a follow-up email telling me that the part was shipped along with providing the tracking number. The installation of the part was easy and took no time to complete. Overall it was a fine experience and if I need to order anything in the future, I will be sure to come back and order from etrailer. 519774



- HM48190
by:

The conector was exactly what I needed to make the connection work. 848495



- HM48190
by:

No complaints - may have taken longer than expected. Would not stop me from ordering again. Product was was exactly what I needed. 848285



- HM48190
by:

Products were as listed - great quality and as always fast service! 798316



- HM48190
by:

Great replacement for my 2000 Ford Ranger and likely any vehicle with tow light connector. My cables were a little thin for the internal V spikes that you splice the wire in to, so I needed to take a pair of needle nose pliers and wrap them around the lead inside. Came with terminal grease, which I didn't expect. The three lights on the connector are great to make sure it's all working. Highly recommended. 772383



- HM48190
by:

Wanted a connector I could bolt to my bumper instead of leaving it dangling. This fit the bill. My only complaint is that the no-strip wire connectors were apparently designed for a heavier gauge wire than my wiring harness has (no gauge range stated on the web site or packaging), so they didn't make good contact on the first try. I had to double the wires over before pushing them in so they made good contact (that made them a little too tight but it worked). I didn't originally think I needed the LEDs, but they came in handy letting me know about the connection problem, and reassured me that my fix took care of it. 735762



- HM48190
by:

Great box for making all the connections for the plug harness, trailer brakes, and the brake battery and safety switch. etrailer has all the parts needed to rewire a trailer from plug to lights!!! 679731



- HM48190
by:

Fast delivery, effortless ordering, easy site to navigate 651435



- HM48190
by:

This harness assembly has performed as intended every time I hook up the trailer. I feel it was a great purchase. 606615



- HM48190
by:

Week made, sturdy product, easy to inst all. 591448



- HM48190
by:

Installation was straightforward, easy, and instructions were included. 557526



- HM48190
by:

I haven’t installed it yet, but it looks great and came in a timely fashion. Great job e-trailer. 553416



- HM48190
by:

Product has worked perfectly and makes it so much easier when hooking the trailer up to the car. No more dangling wires! 541472



- HM48190
by:

I have not installed it yet but I like that it is sturdy construction with a hefty cap to keep the contacts clean. Extra added bonus is it actually has led's so that you know the connection is good! Only A few days delivery. Looks easy to install, no soldering or wire connectors needed. 529277



- HM48190
by:

Could not have been simpler. Backed truck up on to ramps, unbolted the original harness (on which the ground plug had snapped off) verified the colors and placement of the wires on the new plug, cut them, slid the wires into this new plug per the directions, screwed the cap on and bolted it up in place where the original was. The LED's showed everything was working and it was done. No more than 10 minutes beginning to end. Could not have been easier or less expensive to repair my harness. A win/win. 499026



- HM48190
by:

Vehicle had a lot of wiring issues so could not use. 497802



- HM48190
by:

great 437021



- HM48190
by:

Product is good, easy to install. Light on individual wire makes it easy along with the clear instructions that come with it. Video of item is very helpful. Worst thing UPS to USPO mail service: always seems to be a day or two dead period. 406295


Comments
Great, still working
Douglas S - 07/15/2018

40963

- HM48190
by:

On time. Perfect condition ! 394358



- HM48190
by:

Ordered a bunch of stuff for hooking up a towed. Everything arrived as ordered and quick shipping. Everything fit the application without much trouble. Communication from etrailer was excellent. I would purchase from etrailer again. 372338


26
47
Show More Reviews

Ask the Experts about this Hopkins Wiring

  • Is the Terminal Grease Included with the Hopkins Connector Part # HM48190 Conductive
    The terminal grease that is included with the Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector part # HM48190 is non-conductive therefore you should not have any issues using it on the quick-splice terminals of the trailer connector. The grease as you mentioned is designed to keep out dirt and moisture therefore is highly recommended that you use accordingly. If you need more of the terminal grease for other applications then you can use part # 11755.
    view full answer...
  • How to Troubleshoot a Trailer Connector Without Power
    If the trailer connector at the rear of your 1998 Ford F-150 is not receiving power, you will first want to check inside the connector for any dirt or debris. You can use electrical cleaner to clean the connector off, if needed. You will also want to give each of the wires leading into the connector a good wiggle to ensure they are properly attached. If the wires have come loose or the pins inside the connector are corroded, you can replace it using part # HM48190 for 4-way connectors or...
    view full answer...
  • Why Do Test LEDs Light Up Without Actual Trailer Lighting Signals Transmitted
    LED type lights are very highly efficient, using only about 1/10th the power required by standard incandescent light bulbs. This means that certain wiring harnesses will cause one or more of the LEDs to light up just from the very low-level residual power that "leaks" through a harness even when there are no full-scale signals being transmitted. This is entirely normal and does not indicate any malfunction in part # HM48190. If you have a voltmeter you can test each of the three circuit...
    view full answer...
  • Solution for Connecting RV 4-Flat Male to 4-Flat Male on Tow Dolly
    I do have a solution for you, however we do not have any adapters available that will allow you to connect the two male 4-flat connectors on your RV and tow dolly. An RV or vehicle will typically have a 4-flat female connector at the rear for hook up with the trailer. I recommend simply cutting the male connector from the RV and replacing it with the Vehicle End Hopkins Endurance Quick-Fix Replacement 4-Way Flat # HM48190. After cutting off the RV's male connector, you will simply insert...
    view full answer...
  • Recommended Wiring For 5th Wheel RV Trailer to Pull Another Trailer
    We do not have any kits for adding a trailer connector to a 5th wheel trailer, but you can simply run the wires from as far back as you can tap into the signal on your 5th wheel to the rear. I suggest using the Deka Bonded 4 Wire # 16-4B-1 sold by the foot. You can use quick splice wire connectors like # SWC501925-1. For the back of your RV, you can use the Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End # HM48190. If you need...
    view full answer...
  • Recommended 4-way Connector Needed for Tow Daddy Wiring Harness for Dinghy Towing
    Sounds like you are looking for the just the Vehicle End 4-way flat trailer connector like the Hopkins # HM48190. This will mate with the wiring kit you have and connect to your male end 4-way plug # RM-300150-00 that you also purchased. If you need a 4-way with a wire lead then the Hidden Hitch # 118603 includes a 60 inch lead and a dust cover for the connector when not in use. I have linked all the above mentioned products to this page for your convenience.
    view full answer...
  • Where to Attach the 12 Volt Power Circuit for 7-Way Wiring on a 2006 Jeep Rubicon
    For the 12 volt accessory circuit of the 7-way you plan on installing on your 2006 Jeep Rubicon you will want to run that all the way to the positive side of the vehicle battery through a 40 amp circuit breaker like part # 9510. 10 gauge wire should be used. If you are looking for a keyed power source that only sees voltage with the key on you will need to also install a part # TR118665 inline with the 12 volt power circuit from the battery with a keyed power source run to the middle...
    view full answer...
  • Adding a Removable 4 and 7-Way Trailer Connector on a 2005 jeep Wrangler Rubicon
    What you can do is replace the trailer wiring set up you have on your Jeep and hardwire in # HM40975-11998. This will allow you to just unplug the connector part. The wire functions and colors on this harness are a little different. Since the 7-Way part of the connector is hardwired on your Jeep, replacing the whole connector is the best way to go. On your current set up you should have a white, brown, yellow, and green on the 4-Way, and then a black, blue, purple, and white on the 7-Way...
    view full answer...
  • Troubleshooting Thule Transporter Combi Turn Lights Opposite of Vehicle Lights
    On your Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier - Tilting # TH665C it sounds like the prewired tail lights were reversed. The easiest fix is to use the Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End # HM48190 or Quick Fix (TM) 4 Pole Flat Trailer End # HMC20031. If you see the lights were accurate than your vehicle wiring harness was reversed. If this is the case, you can use the Curt Vehicle Wiring Harness...
    view full answer...
  • 4-Way Vehicle Side Trailer Connector that Can be Spliced Into Wires from Trailer Wiring Harness
    I have a great option for you. Take a look at the Hopkins Quick Fix connector # HM48190. All you have to do is remove the screws on this connector, place the wires in the correct locations, and then put the cover and screws back on. The white wire will go to the one exposed pin. Next to it will be the brown wire, then the yellow wire, and the green wire is last. This connector also has a handy LED test light feature so you can see if each function has power without using a meter or circuit...
    view full answer...
  • Is There a Coiled 4-Way To 4-Way Extension Available?
    The Wesbar Trailer End Connector - 4-Flat - Coiled # 54000-026 will work to connect a 4-way plug like # HM48190 to the pigtail end to create exactly what you are seeking. Otherwise, we have options like the Hopkins Endurance Easy-Pull 4-Flat Extension w/ 2 Grip Rings - Vehicle and Trailer Ends - 48" # HM47114 to span that distance without the coiled wire.
    view full answer...
  • Troubleshooting Trailer Wiring For Double Towing Camper and Motorcycle Trailer Behind 2016 Tundra
    It sounds like you want to tow 2 trailers and need the wiring for both. It is completely possible to do that as long as your truck can handle the total weight of the two loaded trailers. For the wiring, there are a couple of different options. You can run an extremely long harness like you mentioned that will be a simple customized length or you can tap into your trailer wires to create a harness at the back of your camping trailer. My recommendation is to do the latter. To...
    view full answer...
  • Running Wiring For Bully Light Bar At Back Of 40-Ft Fifth Wheel Trailer
    There are a couple of ways you can run the wires for the Bully Light Bar, part # BLS-1103. The easiest way would be to attach the light bar wiring to the wiring you have at the rear of your fifth wheel trailer. That is if you can access the wiring easy enough either by getting to the wires under your trailer or by removing the lights and getting to the wiring behind them. Another way would be to install a junction box like part # 38656 on your fifth wheel and attach the trailer wiring...
    view full answer...
  • Low Voltage on Factory 4-Way Trailer Connector on a 2002 Toyota Tundra
    If the factory tow package wiring on your 2002 Toyota Tundra uses both fuses and relays then the issue could be a faulty relay. They can sometimes still allow some power to trickle back even if they are bad so that is one thing to check. There could also be a corrosion issue, ground problem, or wiring problem. If you are testing the pins on the 4-Way go ahead and test one of the wires going to the connector instead. If you get the proper voltage on the wire but not the pin then it is...
    view full answer...
  • Recommended 4-Way Flat Connection For Kayak Trailer And Vehicle
    To fix the 4 way connections you cut off, I recommend the Quick Fix 4 Pole Flat Car and Trailer Ends # 48195. If you want to add the LED test lights so you know your vehicle side is working, you can use the Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End # HM48190. The 5th wire on the trailer side will need to be doubled up. This extra wire is a running light duplicate that often is added so a jumper wire is not needed from one side...
    view full answer...
  • Using Hopkins Tow Bar Wiring on 2011 Jeep Wrangler That Needs Charge Wire From RV
    You can use the Hopkins tow bar light kit part # HM56200 on your 2011 Jeep Wrangler as it's a confirmed fit, but the 4-way ends of this and the # A10-6034VP don't match as they are both male 4-ways. So what you could do is cut off the 4-way of either side and install the # HM48190 in place of it and you'd be able to make the connectors as needed. For a coiled extension to adapt the 7-way or your RV to the 6-way of the adapter you'd then want the # RM-1676-7 which will carry the charge...
    view full answer...
  • Troubleshooting Trailer Running Lights Not Working on Factory 4-Way For 2013 Ford F-150
    It sounds like you have done most of the troubleshooting already! You have ruled out the fuses/relays being the problem and by testing the 4-Way on the F-150 and seeing that you aren't getting power at the running lights pin, you also know that the trailer isn't an issue. At this point the problem has to either be coming from the actual factory wiring between the running lights circuit and the 4-Way, or with the 4-Way connector itself. Since testing/inspecting the factory wiring will...
    view full answer...
  • How To Make a Trailer Wiring Harness Adapter with Two Vehicle Side Trailer Connectors
    In order to obtain a trailer wiring harness with two vehicle side trailer connectors you will need to either splice two of the Hopkins Wiring Harness with 4-Pole Flat Trailer Connector part # HM48035 into one another with the Deka Heat Shrink Butt Connector part # DW05744-5 or you could just install the Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector part # HM48190 onto the opposite end. Unfortunately, we do not have a complete trailer wiring harness like the Roadmaster...
    view full answer...
  • Troubleshooting Trailer Running Lights Not Working on Trailer
    I checked your order notes and it looks like you ordered part numbers # 9653P, # HM48192, and # HM48190. It could be as simple as a bad ground that is causing the running lights to now work, but since the bulb was blown that would more indicate a short on the wiring of the circuit somewhere. Check the wiring of the circuit for any exposed or cut wire and fix as necessary. I realize that's the last thing anyone wants to do in the cold but that is most likely the problem. The way you have...
    view full answer...
  • Alpena Trailblaze Tailgate LED Light Bar Does Not Show Passenger Side Lights
    For starters, I recommend that you check the ground for the 4-way trailer connector on your vehicle as this could very well be causing your issue. If the ground checks out then this leads me to believe there is an issue with the trailer connector on your 2004 Chevrolet Silverado or the trailer connector on the Alpena Trailblaze Tailgate LED Lights part # ALP77229. I see you said that you replaced the 4-way but I didn't catch if it was the 4-way on the vehicle or the 4-way on the light...
    view full answer...
  • Trailer Wiring Harness with 4-Way Flat Connector for 1997 Honda Valkyrie
    First, with LED lights, the color of the bulb needs to match the color of the lens. Otherwise you will have dim lights or off-color lights. If you want you can replace just the 4-Way end on the harness that you have with # HM48190. If you want to replace the whole harness I recommend going with a powered option such as # 119190KIT which will get the power for the trailer lights directly from the battery instead of drawing it through the tail light wiring.
    view full answer...
  • Can a Reese Multi Tow 7-Way and 4-Pole Trailer Connector be Repaired if 4-Pin Connector Broke
    You can purchase a separate 4-pin connector like # HM48190 but it won't fit the slide slot on the mounting bracket on the multi-tow 7-way and 4-pole trailer connector # 74682. You can zip tie it or even let it hang if you prefer. I included a couple video reviews for you too.
    view full answer...
  • Converting Vehicle Side 7-Way Trailer Wiring to 4-Way Standard Wiring
    It sounds like you want to do a conversion from your 7-way to a standard 4-way trailer connection that has the 3 functions and ground. There are a couple different options for you that don't require much if you just need the 4-way connector for a trailer. You can use the Pollak 7 Pole to 4 Way Connector Adapter # PK12716 for the easiest connection. Your 2001 Xterra didn't come with a factory 7-way so you may find there is a 4-way plug connection behind your 7-way that you can simply...
    view full answer...
  • Can New 4-Way be Spliced Onto Trailer Wiring Harness 118566 on 2015 Ford Escape
    Yes, you can splice in a new 4-Way flat vehicle end, such as # HM48190. This vehicle-side 4-Way also has LED test lights so its easy to determine if one of the circuits isn't working. Or for a regular short-length harness you can use # 20250.
    view full answer...
  • Are Wesbar Coiled 4-Pole Connector 54000-026 and Hopkins Quick-Fix Connector HM48190 Compatible
    Yes, the parts you referenced, Wesbar coiled trailer-end 4-pole with pigtail leads # 54000-026 and Hopkins Quick-Fix Replacement 4-Way Flat Vehicle Connector # HM48190 are compatible. These two parts will give you a coiled 4-pole extension with both vehicle-side and trailer-side 4-pole connectors, with LED test lights on the vehicle side plug.
    view full answer...
  • Adapter to Go from 6-Way Square on Tow Vehicle to 4-Way Flat Trailer Side Connector
    It sound like you want the opposite of adapter # 30104. That would mean your tow vehicle has a 6-Way square connector. What you can do is use # 37995 which has both the vehicle end and trailer ends. On the trailer end, you can wire the loose wires to a vehicle side 4-Way, # HM48190. Then you will have a 6-Way square to 4-Way flat adapter. The other option is to just replace the 4-Way flat on the trailer with the trailer end 6-Way that comes with # 37995.
    view full answer...

Do you have a question about this Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Frances L
Written by:
Tyler C
Installed by:
Cole B
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.