bing tracking image
  1. Watersport Carriers
  2. Inno
  3. Paddle Board
  4. Surfboard
  5. Roof Mount Carrier
  6. Aero Bars
  7. Elliptical Bars
  8. Factory Bars
  9. Round Bars
  10. Square Bars
Inno Multi Board SUP and Surfboard Pads for Crossbars - 20" Wide - Carbon Fiber - Qty 2

Inno Multi Board SUP and Surfboard Pads for Crossbars - 20" Wide - Carbon Fiber - Qty 2

Item # INA771
Our Price: $51.56
Watersport Carriers
Shipping Weight: 1.54 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
These high-density foam pads let you safely transport a surfboard, stand-up paddleboard, or other gear on your crossbars. Heavy-duty pads simply wrap around bars and fasten with Velcro closures. Great Prices for the best watersport carriers from Inno. Inno Multi Board SUP and Surfboard Pads for Crossbars - 20" Wide - Carbon Fiber - Qty 2 part number INA771 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (0)
  • Videos (3)
  • Photos

Inno Watersport Carriers - INA771

  • Paddle Board
  • Surfboard
  • Roof Mount Carrier
  • Aero Bars
  • Elliptical Bars
  • Factory Bars
  • Round Bars
  • Square Bars
  • Crossbar Pads
  • Inno
  • Hook-and-Loop Mount
  • No Load Assist
  • Rear Loading
  • Side Loading

These high-density foam pads let you safely transport a surfboard, stand-up paddleboard, or other gear on your crossbars. Heavy-duty pads simply wrap around bars and fasten with Velcro closures.


Features:

  • 2 Pads let you safely transport gear on your roof rack crossbars
    • Great for a surfboard, stand-up paddleboard, snowboard, sailboard mast, or kayak paddles
  • High-density foam construction
  • Heavy-duty, fade-resistant covers wrap around crossbars and secure with Velcro fasteners
  • Tie-downs (sold separately) required to secure your gear to crossbars
  • Black carbon fiber finish


Specs:

  • Application: round, square, aero, elliptical, and most factory crossbars
  • Pad width: 20"
  • Limited lifetime warranty


INA772 Inno Multi Carbon Fiber Cross Bar Pads - 20" Wide - Qty 2

Replaces INNO INA771





Video of Inno Multi Board SUP and Surfboard Pads for Crossbars - 20" Wide - Carbon Fiber - Qty 2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Inno Multi Board SUP and Surfboard Pads Review - 2020 Chrysler Pacifica

Adam: Hi, everyone, Adam, with etrailer.com ,today we're going to be taking a look at the Inno multi board pads for your crossbars. And this is going to allow you to get your paddle boards and also your surfboards to and from the destination. We're using the factory rails on our 2020 Chrysler Pacifica. So these pads are going to be made of a high density foam. And all they're going to really do is just wrap around your bars, hook and loop straps that connect them to it. And honestly, this is going to be the easiest and most simplest way to get your boards to and from your destination on your roof.

An extremely cost-effective way to doing that. And I do think it's going to be just the least amount of hassle to install. They just slide right on pretty easy. And you only have to worry about it damaging your board because that high density foam is going to have a little bit of give.So it's not only going to be easy to strap down, but also it's going to take care of your board as well. It does not come with straps.

So if you need any, we do have them sold separately for this kit, or we just have a bunch on our website. So just go ahead and pick the right ones for you guys. So these pads in particular are 20 inches long. So it's going to be a decent amount of width to get all of your boards up and on here nice and easily. Another thing to think about is the material that surrounds that high density foam.

This is going to be waterproof, so it's not going to sit there and just absorb all that water. So whenever, maybe after you go out and go boarding, you can put these back on there.And even if it drips onto it, it's just not going to soak and sit there and mold over time. So you don't really have to worry about that. So they're going to install on our factory bars, just as easy as any of those other square bar, round bars, pro bars, aero bars, whatever you guys got. Really simple, you just wrap it around and connect that hook and loop just like so.

And the nice thing about having the 20 inchers, is actually we'll have enough room to put two up on here. So if you have multiple boards, you've got a friend that you want a board with, you can just grab two of the same ones and throw them on the other side of your bar. Well, everyone, if you guys are looking for a very economical choice to get your boards to and from the destination, and you've got a van like this, I honestly do think utilizing these crossbars with these pads is going to be your best bet. Again, these we're the Inno multi board pads for your crossbars on our 2020 Chrysler Pacifica.

Customer Satisfaction Score:


Customer Reviews

Inno Multi Board SUP and Surfboard Pads for Crossbars - 20" Wide - Carbon Fiber - Qty 2 - INA771

Average Customer Rating:  4.7 out of 5 stars   (3 Customer Reviews)

These high-density foam pads let you safely transport a surfboard, stand-up paddleboard, or other gear on your crossbars. Heavy-duty pads simply wrap around bars and fasten with Velcro closures.

by:

Inno rack pads arrived in a reasonable time and intact/undamaged. They appear to meet all specs and seem well-constructed. Look nice on the rack and will likely work well.

My only concerns were: 1) the packaging was riddled with large metal staples . . . over-protected and over-packaged for the product, and a pain to deal with (and not very environmentally friendly). Shipping tape would have been more than adequate. And 2) a very unpleasant odor from the product when opening the package. Took some time to air that out, and had to move the package outside immediately.



by:

I use these consistently without issue.



by:


3
3

See what our Experts say about this Inno Watersport Carriers

  • Recommendation For Protecting A Kayak When Using The Inno Load Lifter INA453
    By cowling, I assume you are referring to the coaming, which is the edge of the cockpit on your kayak. If this is the case, you will want the Inno Pads for Crossbars - 20" Wide # INA771. Typically these are used on a crossbar, and you may need two sets if your Yakima JetStream bars are currently bare, but they can also be used on the Inno Kayak Lifter Load Assist # INA453 to protect your kayak when loading and unloading.
    view full answer...
  • Recommended Inno Watersport Carrier for 36 Inch Wide Stand up Paddleboard
    The Inno Locker Watersport Carrier w/ Crossbar Pads - Locking - Clamp On - 1 Boat or 2 Boards # INA446 is a great option for your large SUP. The similar # INA445 is a fit as well and is channel mounted but you will need pads # INA771 sold separately. These carriers are rated for carrying both kayaks and paddleboards so it will work well for you. You will need 9 inches of crossbar width past the 36 inch board so you will need a minimum bar length of 45 inches between the towers.
    view full answer...
  • Will Channel Mount Inno Locker Watersport Carrier Fit Thule WingBar Evo Crossbars
    The Inno Locker Watersport Carrier - Locking - Channel Mount # INXA445 will definitely fit with the channels on the Thule WingBar Evo Crossbars! I really like the channel mount system because it looks a bit more clean since there isn't a whole clamp setup on the underside of the bars. I do recommend picking up some board pads as part # INA771 so your surfboard isn't making direct contact with the crossbars.
    view full answer...
  • How To Carry a SUP or Surfboard on Thule TracRac Bars
    I do have an option for you but the Thule SUP and Surfboard Pads for AeroCrossbars part # TH846000 are designed for Thule WingBar Evo, AeroBlade, ProBar, and Xsporter Cross Bars which are all about 1/2" narrower than the TracRac system bars so the bar will be too wide to fit inside the pad. I recommend to use the Inno Surf and SUP Pad part # INA771 which is more of a universal split bottom design that uses an elastic cord to cinch to the bar so it will work on the larger TracRac bars....
    view full answer...
  • Does Inno Locker Watersport Carrier Fit Rhino-Rack Vortex Aero Crossbars
    Glad you asked, and it does, but you'll need longer bolts for the clamp-on version of the Inno Locker, or you can use the channel-mounted version. The reason for that is the clamp-on Inno Locker mounts to crossbars up to 1-1/8" tall, and the Rhino-Rack Vortex crossbars are 1-3/16" tall. So here are your two options: Clamp-On - Inno Locker Watersport Carrier w/ Crossbar Pads - Locking - Clamp On # INA446 - Tall Crossbar Adapter Kit for Inno Locker Watersport Carriers # INISF722 (Note:...
    view full answer...
  • Best Roof Rack and Surfboard Carrier for a 2020 Toyota 4Runner with the Raised Side Rails
    While it is true that price does typically reflect quality, when it comes to roof racks you will be just as happy with the performance of a middle-of-the-road aero-style rack as you would with one of the ones at a higher price-point. Because of this I highly recommend the Inno roof rack for your 2020 Toyota 4Runner with the raised side rails. This consists of 54" Aero Crossbars # INXB138-2 and the Through Feet # INXS150. It not only gives you the aerodynamic crossbars but the feet also...
    view full answer...
  • What Roof Rack Works with My 2004 Honda Accord Sedan to Use the Inno Locker # INXA445?
    I have a great crossbar solution for you to use the Inno Locker # INXA445! For your 2004 Honda Accord 4-door with a naked roof, the Inno Locker will attaches as long as you have aero crossbars that have top channels that extend the length of the crossbar. For 100% definite compatibility with the Inner Locker on your roof, I recommend the following crossbar setup: - Inno Aero Crossbars - Aluminum - Black - 48" Long # INXB123-2 - Inno Through Feet for Aero Crossbars - Naked Roofs # INXS250 -...
    view full answer...

Do you have a question about this Watersport Carrier?


Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video by:
Kathleen M
Employee Chris R
Video by:
Chris R
Employee Zach D
Video by:
Zach D
Employee Randy B
Installed by:
Randy B
Employee Hayden R
Installed by:
Hayden R
Employee Ronnie R
Written by:
Ronnie R
Employee Adam E
Test Fit:
Adam E
Employee Ashley K
Updated by:
Ashley K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924