bing tracking image
  1. Vehicle Suspension
  2. Air Lift
  3. Air Springs
  4. Towing/Load Leveling
  5. Rear Axle Suspension Enhancement
  6. Light Duty
THIS ITEM IS NOT A FIT FOR
2022 Honda Passport
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Air Lift

Air Lift 1000 Air Helper Springs for Coil Springs - Rear

Part Number: AL97DQ
In Stock
$149.99
Retail:$206.99
You Save: $57.00
Vehicle Suspension
Not Confirmed to Fit

2022 Honda Passport

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
1,000-lb Capacity. Upgrade your vehicle's rear coil spring suspension with this kit. Molded polyurethane air springs fit inside your existing coil springs for added support when hauling heavy loads. Improves handling, braking, and overall ride. Great Prices for the best vehicle suspension from Air Lift. Air Lift 1000 Air Helper Springs for Coil Springs - Rear part number AL97DQ can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1328)
  • Q & A (0)
  • Videos (2)
  • Photos

Air Lift Vehicle Suspension - AL97DQ

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • 1,000-lb Load Support: Keeps your vehicle level when hauling or towing for safer handling.
  • Better Steering and Braking: Reduces rear sag so your headlights and stopping stay consistent.
  • Smoother, More Stable Ride: Absorbs road shock and sway for steadier control under heavy loads.
  • Adjustable Air Pressure (5–35 psi): Fine-tune firmness for towing days or everyday driving.
  • DIY-Friendly Install: Fits inside rear coil springs with included tubing, valves, and hardware.
Made in USA

Features to know about

Stay Level and Confident Under Load: Up to 1,000 lbs of Rear Support

Heavy loads can make the rear end squat, throwing off steering, braking, and headlight aim. The Air Lift 1000 Air Helper Springs add up to 1,000 lbs of load-leveling support inside your factory coil springs to keep things even when hauling or towing. By sharing the work with your stock suspension, they help prevent sag, reduce tire wear, and keep your handling steady on the highway or at the jobsite.

Smooth Out the Ride: Adjustable Air Pressure from 5 psi to 35 psi

Every load is different, and this system adjusts to match. You can fine-tune each spring’s air pressure anywhere between 5 psi and 35 psi for just the right balance of firmness and comfort. Run dual air lines if you want to inflate them separately and even out side-to-side loads. Whether you’re towing a trailer or driving empty, it’s easy to dial in a level stance and stable feel.

Simple DIY Setup: Fits Inside Existing Coil Springs

Installation is straightforward with parts designed to sit neatly inside your rear coil springs. The kit includes two molded polyurethane air springs, two heat shields, tubing, Schrader valves, and hardware. Manual inflation valves can be mounted on the bumper or any accessible spot you prefer. Add a compressor system later if you want automatic adjustment—everything is ready for it.

Built Tough for Long-Term Use: Molded Polyurethane Construction

Each air spring is made from durable molded polyurethane that resists wear and helps absorb road shock over time. The design keeps your factory suspension from taking all the stress, improving stability and ride quality mile after mile. With proper setup and adjustment, these helper springs deliver dependable load support without changing your normal ride height when unloaded.

Specs

Weight and Capacity

  • Load-leveling capacity: up to 1,000 lbs

Pressure

  • Adjustable air pressure: 5 psi - 35 psi

Warranty

  • Lifetime warranty
  • 60-Day satisfaction guarantee

60863 Air Lift 1000 Air Bag Suspension Support System for Coil Springs - Back

Installation Details AL97DQ Installation instructionsAlternate Instructions AL97DQ Installation instructions

This Product Fits The Following Vehicles




Video of Air Lift 1000 Air Helper Springs for Coil Springs - Rear
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Brads Honest 6 Month Review - Air Lift AirLift 1000 Air Helper Springs

This is my 2010 Toyota Sienna and this is my daily driver, I use it for a bunch of different stuff. One of the cool things about being in etrailer is I'm able to use a lot of our products out in the wild and that can be a bike rack, a cargo carrier, or a roof box, or even pulling a trailer. And on normal vehicles that, you know, you're hooking things up to a hitch, you may not notice the sag that can occur. But I'm here to tell you, when you have things extended past, you know, the length of the vehicle, it starts to squat down, and a minivan is definitely one that shows that. If you ever see someone loaded down on a road trip with a roof box and cargo carrier, that van's gonna be squatted. And that was something that I wanted to fix immediately with this van.

And I had the chance to do that with Air Lift 1000 light duty slip in bags. And it's kind of one of those that I looked at the product and I didn't really know what it would do. But here on my own van, I have them on here, I've had them on here for six months and I'm not taking them off, they are phenomenal, just from a daily driving standpoint as well as when things get heavy. The basic concept is these will slip in where your springs are gonna be located, inside of them. And then when you run air to the fitting, it's gonna fill these bags up.

Now you're probably thinking of the convoluted style where it's brackets that bolts up to the frame, those are really good for people that haul with trucks all the time with varying loads, you can adjust that out. And this is kind of similar, it's a light duty version of it. So pressure wise, you can only go up to 35 PSI in these with a minimum of five, but really it makes a world of difference. The first time I put these in was right before our vacation, I slipped these in and I showed Ian, who's a fellow installer who also drives a Toyota Sienna, you know, how easy it was to do, and we took it out for a quick ride and he was blown away. All right, so we'll take off here, I'm gonna head over to our bumps course.

Even just hitting this corner here, I'm not feeling the same amount of roll in the body that we would in my van, so definitely impressed with that. Now we'll go over the bumps course here, I'm gonna start kind of slow. Yeah, it's already a night and day difference. I will say one thing specifically that I notice even now going this slow over the bumps course is the rear of the vehicle. I'm not getting as much jounce or rebound out of the rear end, with mine, it really seems like it's getting as close to bottoming out as it can, even on these smaller bumps.

Yeah, so even the handling, as far as cornering, it just feels great, it feels more secure. It's keeping me upright. And one of my wife's biggest complaints is she gets carsick from the vehicle jostling around too much. So I feel like even with the upgrades, it would just help keep her from saying anything on those road trips as well. We do pretty long road trips out cross country just to go see family multiple times a year. So I'm thinking these upgrades need to happen sooner rather than later. Having the same vehicle seeing a kind of comparison really sends the picture home. I've had these on here for six months, so I'm kind of used to it at this point. But ease of installation, kind of, they're a little tricky, you do have to squeeze them into the bag and you wanna raise your suspension up, no cutting or drilling required. Once you get them slipped in, you route these air lines to the back to a fitting, wherever you wanna fill it up. You don't need a compressor. If you have an air compressor, cool, you can fill that up, but you don't need onboard air, you can stop at any place that you'd fill your tires with and get that air pressure adjusted. I actually use my bike pump that I keep in the back anyway and I am able to fill these bags up pretty quickly. So it really shows, over bumps, just normal driving unloaded, just me in the car, it really absorbs a lot of that initial bump. And the reason being is this is kind of cushioning, it goes in between the coils, it's really gonna cushion all of that quick impact and takes the strain off the shock so they can really do their job. And that really plays into a little bit more when you do have weight, not only is it gonna be more comfortable overall with these daily driving, but when you put that car carrier, bike rack, roof rack, or even just passengers in your van or your vehicle, that's when you really start to notice the sag. So most vehicles now are designed with comfort in mind and I get that, but the flip side is, is when you start putting accessories or start towing, that's when the suspension gets a little bit saggy and it doesn't make for a great feeling of driving down the road and it's also gonna wear out your suspension. Now when it comes to the adjustability, that's something that I really like about this as well. Normal driving, I actually keep these at 20 PSI 'cause it does better than what it did from the factory. But when I wanna tow, take my bike pump, raise this up to 35 and it can handle that load. Now I've driven around with it with nothing loaded at 35, it's a little harsh, not bad by any means, but it's pretty stiff in the rear. If you like a stiffer suspension, you can do that. But I like it to have a little bit of feel from it still, but not super stiff when I don't have anything on here, so I found that happy medium, so really easy to just adjust that. Now when fully inflated, you are gonna get some extra clearance too, which transitions into having more ground clearance, which is really nice. Recently, on a work trip, I had a kayak trailer behind me that I was hauling and as we went up a hill, the van was getting close to kind of bottoming out, but that little extra clearance made a world of difference, so something to think about. You know, having that little extra clearance should help overall in any scenario when you're towing. And just to show you the difference, I'm gonna bleed out our Schrader valve real time here so you can see it aired out. (air hissing) And the suspension's still settling, I'll give it a quick push here so it can kind of settle on its own. And you can see it dropped just a little bit. It's not a ton, but as soon as you start to put tongue weight on it, that's when you really notice the difference, you know, when I see the wheel well getting pretty low to the tire, it's never bottomed out or anything along those lines. But getting that little extra space is a little bit more, you know, comforting knowing as I go over things, I do have that added ground clearance. Something else that it helps with is having a little bit of sway control on the vehicle because you have those filled up, as it starts to lean, that pressure's gonna wanna keep the car nice and planted. And that was a huge transition for me. Previously, I had a pretty sporty car that was pretty flat handling, it was very quick handling. And as soon as I bought this van, unfortunately, I took a few corners and it just felt top heavy, sloppy, numb, just, well, how a minivan is kind of designed and I wasn't expecting anything different, but not having that nice comforting feeling as I go around corners and just kind of feeling it lean, it wasn't for me. So adding these on, it sure brought that back to life, it really is just like stiffening up the rear suspension. And again, when you wanna just go back to normal daily driving, if you want that normal feeling that you had from the factory, you just bleed that down to the minimum 5 PSI. So a lot of times when I try products out, I'm pretty, you know, I'm impressed by them. But this is one that I really, really recommend. If you have a Toyota Sienna, highly, highly recommend, absolutely get these. Talking with the Air Lift representative when he was here, I told him how excited I was to have them and how much I liked them. He knew immediately that I had a Sienna because he said, "This is kind of a problem child." And going on some of the forums and Facebook groups, I've noticed that people that have put 'em in also love them quite a bit. And this isn't not just for minivans or front wheel drive, it's really any light duty vehicle that you wanna get a little bit more out of when you're pulling that trailer. Whether it be, you know, you're just doing some moving around the house or doing some special projects, these are nice and easy to slip into place, have 'em ready to go whenever you need and really get that support. But really that's not just towing, those cargo carriers that are just weight right behind your vehicle or those roof racks or any of your passengers. So if you have an SUV that's smaller, definitely take a look at these, we have a lot of different install videos on these as well. So if you're struggling on how to get these installed, you can take a look at that or use our dealer locator to find someone close to you to get them installed. Either way, I'm a firm believer in the Airlift LoadLifter 1000s on my van. Hopefully, if you're on the fence, I'm telling you right now, you're really gonna enjoy it.

Customer Satisfaction Score:

Ratings & Reviews

4.6

1328 reviews
5 Stars
(1027)
4 Stars
(180)
3 Stars
(43)
2 Stars
(30)
1 Star
(48)
Review Sort Icon
by:
by:
by:
2019 Kia Sorento
Word of advice: It was WAY easier to just remove the coil springs and install the bags that way. (2016-2020 Kia Sorento)

Lift the rear end, remove wheel, disconnect the lower control arm, shock, and sway bar link. Take out the coil spring and insert the bag from the top. Reassemble in reverse order and torque bolts to spec. Much easier.

From that point it was just a matter of routing the air lines through the control arms, up through the subframe, over the spare tire, to the trailer hitch mount. Bags seem to hold air well and are holding up so far. Definitely made an improvement in handling around corners.

Note: There is a noticeable squeaking/noise from the rear end going over bumps at low speeds. Once you're on the pavement or up to speed it improves.

Loses one star for the noise and install. Otherwise not a bad product for the price, especially if you're the DIY type. I personally work on cars, so maybe it was a little easier for me.
Christopher H. profile picture
Etrailer Expert

Christopher H.

9/17/2026

Thanks for all of the detail here Charlie and really appreciate the photo!

by:
Hummer H2
I purchased this product for some additional support for our Hummer H2 when we are towing our travel trailer. I removed the springs for easier installation of each bag.
I am 66 years old and total time from start to completion was 3 1/2 hours from set up to clean up !
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/10/2025

The helpers look great on your Hummer, Rob! What kind of travel trailer are you hauling?

Rob profile picture

Rob

4/10/2025

@GwendolynY We are towing a 16’ travel trailer and the bags add just a little extra support for bumps so I won’t get sag or excessive rear end bounce.
Rob profile picture

Rob

4/11/2026

I have towed my RV several times over the last year and these helper springs work perfectly! I had a very small air leak but I added some silicone at the airline connections and it is 100 percent! I carry a battery powered air compressor with me and it’s basically a “set it and forget it” systems.

by:
Works great on my 2000 Lexus LX470. I installed these to supplement my AHC deleted suspension. These were installed with Land Cruiser rear springs. Instructions were easy to follow. Routed separate air lines (did not use the y connector) above the frame and fitted the valves into existing holes on the bumper. Run them at 8-10 psi when I have gear in cargo area. Holds air perfectly.
Lazer S. profile picture
Etrailer Expert

Lazer S.

1/13/2026

Glad they are working well for you, Scott! I gotta ask, did you do the AHC delete as it was worn our or did you just not particularly like it? I've heard people do this for either reason.

Scott profile picture

Scott

1/13/2026

@LazerS The AHC system was great when working optimally but mine was wearing out. The globes were starting to fail, both rear hydraulic shocks were weeping, and the ride was getting firm over small road imperfections. I decided to do the AHC delete for cost effectiveness, reliability, and possible future suspension upgrades.
by:
Put these on my 2020 Equinox, it has a tow package and pulls my little Wildwood trailer just fine but with this airliift system it feels SOOOO much more stable!! It drives much less ‘mushy’ and handling is a dream. These are simple to install, perfect product for pulling with a light duty SUV, I am extremely impressed.
Lazer S. profile picture
Etrailer Expert

Lazer S.

7/20/2026

Glad to hear they are making towing a more comfortable experience, Mark! Cool little camper as well! ^___^ Where did you guys take it?

by:
2021 Jeep Wrangler
These air springs are one of the best investments you can make if you have a 4XE Wrangler. The battery pack is so heavy, I am finding after a couple of years the factory springs are getting too spongy and the body lean is more noticeable on the road especially cornering. Plus when you go over larger bumps the body sway is much more noticeable. I looked into an air spring set up but did not really want to spend several thousand dollars and I was surprised when I came across this set for under $[XX]. I was sceptical but thought, why not. They arrived in a small box and I was even more doubtful but when I opened it and took out the kit, I was impressed with the quality of the materials. I followed the instructions (with a few exceptions) and found them to be very easy to install. If you take your time with routing the air lines over the factory heat shields and carefully bring them to the rear drivers side, you can install them using the t connector. You can drill a hole through the thin part of the bumper right beside the license plate. There is just enough air line included to do this. The Schrader valve seats perfectly and makes it very convenient to add or bleed air from the system with only one adjustment. I set the springs at 12 psi and coupled with my after market adjustable shocks, I can make my Wrangler so smooth it feels more like a European SUV than a Jeep. Excellent product.
Arthur profile picture

Arthur

9/25/2025

The air springs are still operating as well as the day I installed them. They do not leak any air pressure nor have they degraded in any way. What a great and simple solution that lasts.

by:
2009 Chevrolet TrailBlazer
We install these on our customers 09 trailblazer to haul a big camper and they really helped a lot! Not just with the towing but just the daily driving and ride quality. 5 stars for sure. It’s a good kit and good price but add a on board compressor and really fine tune things
by:
2005 dodge Ram Pickup
I knew going into this, this was going to be a pain to install. After 5 hours, I had to call a friend who was a mechanic to come over and help get the bags into the springs. We finally read enough reviews where people said to heat up the bags a little, fold them and zip tie them. This worked! But.....Here we are, they've been installed, traveled over 2000 miles with them in and let me tell you, the noise! OMG THE NOISE! Every bump, dip, hell - I think just for the fun of it - my car squeaks like a 1970's Cadi! I've used multiple Teflon lubricants, Bearings Grease and other various lubricants. NO, I didn't use WD40. You can hear me coming down the road the noise is that loud. I called Airlift as instructed and they advised me that they're not even showing that these are a match for my car although Etrailer does. The tech that I spoke to told me that if I've driven that much, with and without loads, adjusted the PSI (which I have. I've gone from 5-35psi as instructed. No matter where I am sitting, it is loud! For someone who is tone sensitive with high PTSD and ADHD/OCD - this is not working. Airlift said that there's a 60 day ride approval. I don't approve as I've gotten to the point that I don't even want to drive my 2025 car! Instead, I've been driving a 2005 van if I need to go to the store or anything. I've truly tried to let these be the savior of my needs, but I think I'm going to just bite the bullet and get a Gladiator or Ram.
Donnie M. profile picture

Donnie M.

6/16/2026

Well, after going back and forth - basically it comes down to - 60 day drive warranty doesnt compute. So after spending $300 on install, now Im expected to spend another $300-$400 to have them removed to return them, oh and pay for return. So roughly $800 to get back $130. Ill chalk this up to understanding that if a product doesnt work out in any manner. To remove these, you have to take the rearend of the car off - shocks and springs - then try to get the bags out of a much smaller ending without damaging otherwise youll not refund. Basically no support, other than a were sorry.

James D. profile picture
Etrailer Expert

James D.

6/16/2026

@DonnieM Thank you for taking the time to share your experience. We're very sorry to hear how frustrating this has been for you, especially after the time, effort, and additional expense you invested into the installation. I do want to clarify that these Air Lift air bags are confirmed to fit your vehicle application, this has been confirmed through Air Lift. However, we completely understand that while a product may be compatible with a vehicle, that doesn't necessarily mean it will meet expectations in terms of ride quality, noise levels, or overall satisfaction. While I realize that doesn't change your experience, I do want to sincerely apologize that these air bags have not delivered the results you were expecting. We appreciate your feedback and the detailed information you've provided. Thank you again for sharing your thoughts, and I'm sorry this solution did not work out the way you had hoped.
by:
Awesome Air Bag support for my rear springs for my 2014 Toyota Sienna 3.5" lifted van. It stopped rear sag with heavy loaf and body roll when driving.
by:
2015 Honda Odyssey
After installing I was very happy with the performance of the Air Lift kit.
A few notes I will highlight to help with install:
-When using the template, the hole is closer to the inside of the center of the van.
-Use a Step Drill bit to cut the hole in the lower control arm. I got mine from HF.
-Route the air hoses thru the lower control arms and zip tie them up along the rear subframe
-I sprayed with air bags with Lithium grease to keep any noises from occurring
-3d printed a bracket to hold the fittings on my rear hitch
by:
Chevrolet Silverado 1500
I put the Airlift 1,000 kit on our Suburban LT 1500 which has a towing package on it to enhance the vehicles ability to lessen frost heaves on our Alaskan highways while towing our travel trailer. The air shocks of the towing package although heavy duty were stressed out on trips down the Alcan. The new airbags are working just fine and were easy to install. After ordering the kit, it arrived within the week. The instructions were easy to follow.
by:
Overall, a surprisingly great benefit for very little cost and a little effort. Took some time to install (no harder than anticipated), the videos were very helpful. I struggled to get the connections all airtight, always had a slight leak. However, still saw a benefit to my suspension and ride, even when not towing. For our 2019 Pathfinder, where the "tow weight" is definitely a little fudged, these where a big help.
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

5/20/2026

Thanks for the great follow-up review, Jimmy! Glad to hear the system made such a noticeable difference in both ride quality and suspension support, even when you’re not towing. It’s also great to hear the install videos helped out along the way. Air connections can definitely be the most finicky part of the install, so we appreciate you mentioning that for others considering the setup. Sounds like the end result was well worth the effort on your Pathfinder. Thanks again for sharing your experience a year later!

by:
Fit my 2019 Toyota Senna AWD perfectly. Easy to install. didn't even have to disconnect exhaust hanger as instructed. instead i used a 1/2 drive universal joint with sockets to access bolt holes on passenger side. I pull a 2500lb boat or a 2000lb trailer with no problems. I use 15 to 30 lbs air pressure to keep level. i used two valves and separate air for each bag. I didn't want it shifting in long turns. I highly recommend and would buy again....
Big B. profile picture

Big B.

8/3/2021

Still working great no leaks would buy againfor any senna rear with coils...

Big B. profile picture

Big B.

4/2/2026

5 years later still working great hold air wo leaks and prevent bottoming while towing 3000 lbs

by:
I was replacing the same setup that I installed in 2007 it held air until last year Had to drop the rear axle to install but once everything is in place it work perfectly it's held air for a year would recommend placing as many of the fittings and the air input valve inside the truck they will last much longer
by:
The product does exactly what it is designed to do at a very reasonable price point. The two star reduction is based on the uber difficult installation process for bags on this model vehicle. Other systems I've installed were done with the coil spring removed, and reinstalled. Ten minutes a corner. Having to contort this bag through the opening between two coils of the installed spring is unlike anything I've encountered in 50 years of mechanical work. No matter how much soapy water I applied, every minute or two, getting a midline crease in the semi-folded bag over an inch wider than the spring OD through and into the inner spring diameter was tortuous. It was every bit of two hours work for just the bag insertions, and I have a full car lift like the video, and removed the wheels for best leverage and access. Once the bags are in; the rest is a cake walk.
by:
Bags came quick and easy to install . I did find that if you remove three bolts, sway bar link , lower control arm and shock and remove the spring it’s a lot easier to put the bag in . So far they are working great !
James D. profile picture
Etrailer Expert

James D.

5/27/2026

Great tip about removing the three bolts, insight like this helps. Thanks for the response Todd and reach out if you need anything in the future!

by:
2023 Hyundai Santa Fe
Seems to work so far. I like results, but air hoses are too thin. Need protectors where hose passes thru frame of car.
by:
2011 toyota Sienna
Installed into the 2011 Toyota Sienna V6 FWD Limited (145k miles) and now is geared up a 2" receiver class II draw-tite hitch package and ready to tow are recently purchased metal 8' x 4'6" tilt-bed trailer, or any occasional heavy payloads in the minivan.
When I had updated my tired 2011 Sienna with new suspension components throughout the vehicle (including lower control arms w/ ball joint(s), transmission/motor mounts, CV drive axles, carrier bearing mount bracket, McPherson struts, rear shocks, brake rotors and pads (front and rear), rear parking brake shoes and hardware, outer tie-rod ends, steering/sway bars links, I discovered a broken, rusty rear, right coil. After all swapped out and four-wheel alignment completed, I opted to add this A1000 air lift kit too.
by:
2021 Hyundai Palisade
The hardest part to the install was figuring how to route the air tubing. Instructions were very clear to follow. They do provide a diagram on were to route the air lines but couldn't figure out how to get there without coming to close to the exhaust and muffler.
by:
Well made and was fairly easy to install. I actually found it was easier to drill a hole into the bottom cushion to run the air line instead of cutting it out. The instructions were very easy to follow. What took the most time was hooking up the hose. I split it into one and ran it out under the bumper on the passenger side. My Durango has dual exhaust so I had to run the tubing up under the body. No leaks after set up and work very well with my rv trailer. Highly recommend.
by:
2016 Toyota 4Runner
This is my second set of air lift , first have been on a 2005 Toyota 4Runner for the past 9 years and still work great. This set I just installed on my new to me 2016 Toyota 4Runner and look forward to many years of towing service with them.
by:
Work well. 2022 Pathfinder pulling R-Pod 195. Issue was the Pathfinder has a soft rear & even w/camper & tongue weights well below max, had to use ball mount w/2” rise to keep camper level…& Pathfinder was riding nose-high. Post-install camper & Pathfinder both riding level & handling seems better. Amazed at how leak-proof these things are. We’re in northern WI w/a lot of zero degree winter days & no signs of bladder, hose or connector degradation. Highly recommend soaking bladders in hot water to provide flexibility because they were TOUGH to shoehorn into the springs. Once in though, I give them a firm thumbs up.
by:
Yes, plan on a good 5 hours to install. I watched several videos that made it look easy, but the smaller ones won't fold up like a hot dog. I ended up folding it at a diagonal after flattening, and it went in pretty easy. I also warmed them up in the hot sun which I think helped
NO SQUEAKING despite other reviews. I wonder if people that have squeaking issues used some kind of lubricant to get them in. I didn't use any lubricant, and have zero squeaks at any pressure.
by:
This is the 4th set of these bags I have installed. The kit is complete and instructions are good.
25
1328
true
Show More Reviews

See what our Experts say about this Air Lift Vehicle Suspension


Info for this part was:

Employee Dan D
Updated by:
Dan D
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Dustin K
Video Edited:
Dustin K
Employee Steven C
Installed by:
Steven C
Employee Daron K
Edited by:
Daron K
Employee Lincoln B
Written by:
Lincoln B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924