Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Features:
Specs:
Note: When servicing your truck with Air Lift air springs installed, if the truck is lifted by the frame, the air must be let out of the springs. And if the rear of the truck is lifted during service, then it must be supported by jack stands to avoid damage to the air springs.
Air Lift's LoadLifter 5000 was designed with an exact purpose: to provide full-time, first-class support to your 1/2-ton, 3/4-ton, or 1-ton pickup. With this kit, you get a safer ride and simultaneously protect your vehicle from the strain that comes with hauling massive loads.
Carrying heavy cargo in your truck bed or trailer puts tremendous stress on your vehicle. Your brakes erode faster, your tires wear unevenly, and handling suffers severely. When towing, you might also experience excessive sway, bottoming out, and even improper and unsafe headlight aim. Fortunately, there is a solution to these problems. By pairing your existing suspension with the LoadLifter 5000, you can seriously beef up your suspension, ensure equal load distribution, and give your vehicle the support it desperately needs. Air Lift's LoadLifter 5000 provides up to 5,000 lbs of load-leveling capacity and distributes the weight of your payload to all 4 wheels. As a result, the stress on your OEM suspension is significantly reduced.
LoadLifter's air bags are adjustable from 5 to 100 psi for precise support, and they can be inflated independently of one another for front-to-rear and side-to-side leveling. They are made of high-quality, 2-ply, fabric-reinforced rubber. Most air bags lose air at the ends, where the bag is enclosed with a steel cap, because the steel can rust and corrode over time, creating small holes. The endcaps on Air Lift air bags are fashioned from corrosion-proof Zytel nylon, a material that is both stronger and lighter than steel, ensuring that the air bags won't lose air. Also, LoadLifter 5000 comes with Air Lift's exclusive roll plates, which both protect your air springs and beef up the load capacity of the springs.
This system installs with the included brackets and hardware. Just mount the springs, inflate them, and ride. To inflate the LoadLifter springs, you just have to pump air in through the inflation valves. A line kit is included with the springs so that you can install the valves (one for each spring) in an easily accessible area - typically they are installed on the bumper. If you want to make the springs even easier to use, you can get a compressor and gauge system (sold separately).
Air Lift kits are designed to keep your vehicle at normal ride height. You can find the normal ride height of your vehicle by unloading it and measuring the distance between the bottom edge of your wheel well and the center of the hub. After you find and record this distance, you can regulate the amount of air that you put into your air springs to maintain normal ride height - even when you are hauling a heavy load. You will need to adjust the air pressure in your air bags according to the size of your load.
Along with a lifetime warranty that has no mileage restrictions, Air Lift offers a 60-day satisfaction guarantee. Just install and use LoadLifter 5000 springs for 60 days, and if you are not satisfied at the end of this time, you can remove them from your vehicle and return them for a full product refund. Now that's confidence.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors, Steven here with etrailer.com. Today, we're looking at the Air Lift LoadLifter 5000 Air Helper Springs and it's a kit for the rear axle. Now folks, this is a custom fit application, so what you wanna do is you want to go to our homepage here at etrailer.com, enter things like your year, make and model, cab size, bed length, 4 wheel drive, et cetera, whatever it asks you, to be ensured you're getting the right parts the first time. Now, as of this current video, this fits a '23 through 2024 Ford F350 Super Duty 4 Wheel Drive. Keep in mind, years could change, videos could be outdated, and it could fit newer years, so always, always check our fit guide. Now folks, this will provide you with, your vehicle rather, up to 5,000 pounds of load leveling support.
It is going to reduce the strain on your rear suspension and help improve both the safety and the ride quality. It has been designed for heavy duty applications, such as 1/2 ton, 3/4 ton, and 1 ton pickup trucks and it will keep your vehicle level when you're hauling a heavy load. So a lot of times, you're loaded up and if it's heavy in the rear, it's gonna push your headlights up and the front of your truck up. This will also help put that headlight aim back to a normal safe position. It can help improve your steering and braking performance and it'll help keep your tires from wearing unevenly.
So if you have less pressure on one side versus the other and that kind of stuff, you're gonna help it wear evenly when you get that back to normal. Now you can manually adjust the air pressure to get the even load distribution and support you need. You can level your vehicle front to rear with these and you can inflate each spring independently for side to side leveling. So maybe you got like a salt spreader in the back of the truck, a camper in the bed of your truck, something like that, where it's just heavier on one side. You can inflate these independently and put one side up versus the other, et cetera, to level it out.
Now this does diminish sway and absorb road shock for a smooth ride. It does come with air lifts, exclusive upper and lower roll plates. Now those will help protect the spring from damage and extend the life of the air springing suspension. The bags are constructed of a two-ply fabric reinforced rubber, while the plastic end caps that are hidden under these silver pieces here, those are made of a high strength Zytel nylon, which is a lot lighter, stronger, and more corrosion resistant than the steel ones out there on the market. All your mounting brackets are heavy duty high density steel that's been black powder coated for superior rust prevention and that kind of stuff.
You have manual air inflation valves and you get an airline with the Schrader valves already installed. You get a heat plate, or heat guard rather, for the one side where the muffler is. All the mounting hardware, the U-bolts, the brackets, keep in mind I've got all this mocked up here just for viewing purposes only. Obviously, the U-bolts and that other bracket there on the table here would go around the axle, on the frame part there, to mount these in place. So again, everything here is just loosely fit together for demonstration purposes. Okay, I see the bag compress and hear that air. You're gonna have between 5 PSI minimum all up to 100 PSI max in these bags. Follow the instructions, use the recommended starting PSI included in the instructions. You get a nice lifetime warranty on the bags, the hardware, everything here. I want to say that these are made in the USA, so it's a nice addition as well, everything made here in the US. If you want a compressor with an end cap gauge, that kind of stuff, that is sold separately, you can purchase that separately here at etrailer and then you could monitor and automatically adjust the air pressure on the fly from inside the cab without getting out to manually do it. Well folks, that's gonna wrap it up for our look at this Air Lift LoadLifter 5000 Helper Spring Kit for your rear axle. I'm Steven, thank you so much for your time. Thanks for watching and stay safe.
Average Customer Rating: 4.7 out of 5 stars (1177 Customer Reviews)
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.Purchased for my 2019 Silverado 3500HD. I've not had long-term use of it yet, but based on other reviews I anticipate everything will function well for many miles to come.
One thing I wish was included in the package from the manufacturer was the Air Lift Union Tee #21838 which I ended up purchasing separatly. The included air line is fitted with an air valve at each end, requiring you to fill the springs individually. For my use, I wanted a single shared line so the springs remain equal, especially in the event of a leak. I recommend the Air Line brand fitting as I first tried a knockoff version since it was more quickly available, but the entire 5-pack leaked around the o-rings so I had even more downtime (do it right the first time...).
I also have a B&W gooseneck wheel hitch and the instructions call for drilling into the frame and using the self-tapping screws to mount the top plate. I was able to use the U-bolts over my hitch bracket at the rear of the plate, but still had to drill into the frame for the front due to the hitch brackets being higher than the frame rail. It's an awkward angle without having lift access, but still very doable - just a tight fit drilling next to the fuel tank.
Overall, a great solution to improving towing.
I am not happy with trailer. The box arrived and was all taped up and abused. When I opened the box there was an important part missed. I called and talked to Joanne and she asked me to send pics of the box and I did and have not heard from anyone about the missing part.i hope you will be able to help me get this part issue solved.
Work the air bags Monday thru Friday every week since install.They complement upgraded leaf springs very well! Had no maintenance or problems of any kind.
Excellent material and the installation instructions were very clear and to the point with the best pictures that coincided with the written material. Only took me 2.5 hours from the start of assembling the air bags with the hardware on the workbench to putting away my tools! This is on my '04 dodge 3500 dually that will be handling my new Host Mammoth Slide in Camper that will set at apprx. 5000 lbs.! Beautiful to maintain level truck and to know that the springs are not collapsed and wearing them down prematurely as well as providing a safe handling truck when on the road.
The air springs solved my driveway clearance issues. Set compressor to 100 lbs for an extra 2” of ground clearance and lowered them to 30 lbs after exiting driveway for cruising. Hardest part of installation was drilling 1/2” holes for the upper mounts. Left the rear duals on for the install. Love the rise at 30 lbs. much smoother and more stable on the road. (2014 Winnebago Vista 31KE) Kelly L. was a great help when ordering!
Installation of the Loadlifter 5000 kit went smoothly, no issues at all. One of the best advantages of having this system on my F-150 is the stabilization it provides when towing our camper. I tow a 6,000 lb camper with an 800 lb hitch weight. I use a weight distribution hitch so the truck and camper ride level, as they should. The difference with the Loadlifter system is that it controls the bounce, providing a much more stable and controlled ride. I highly recommend this air spring kit in conjunction with a weight distribution hitch. When you don't need to added support of the air springs, ie no load, just drop the air pressure down to 5 lbs and you don't know they are there.
Installation was straightforward and retained the original suspension while adding the bags. Inflation to level the rig, a 2018 Ram 1500 and a 3 1/2 ton travel trailer, was surprisingly quick. The ride from Southern California to Central Oklahoma was uneventful. The bags handled the load and the road without sway or dip. Very happy with the product.
I hope I never loose an airbag because it’s very difficult to remove the 4 upper & lower retainer bolts.
The bags should be studded like big rig bags.
Order after order I have been completely satisfied with E-Trailer. They are always available for questions, and best of all they have the answers. The products they sell are first rate.
My last order was the Air lift load lifter 5000 item # AL 57288. After confirming the fit for my truck with there team, I ordered it. It arrived on time, and in great condition.
The team at E-Trailer know there stuff and are ready to help you.
Good product, quick service. Took a couple hrs to install and very happy with the results
Great product but instructions could be better. Simple things like identifying parts better to make it quicker to find the right part. Like in step3 installing M10 bolts, they were the only black bolts, if they said that it would have been really quick to identify them in the parts bin.
Better identifying info on pictures to orientate you as to what your looking at.
A zoomed out view every once in a while of where things are in relation to the truck.
In step 10 be more specific about the part your cutting, they talk about taking brake line mount X off and then talks about cutting a brake line mount but its a different one.
Installing Nylon Air lines - SO right off it tells you to cut the line in half ie one for each side, but you should first look at how the line for the right side where the muffler is as I could not route it along that frame rail as it would be WAY to close to the muffler going to the air bag. so I was not able to route it cleaner the long way on the left frame rail and over axle.
Last it NEVER says how to attach the air line to the 90 deg fitting on the air bag. Had to go to youtube to see its a simple press on but without saying that....
I have had rear suspension airbags on the last 5 trucks I have owned. There is no better system to control weight roll of a load in the bed or sway control pulling trailers.Be sure to order the air line "T" which does not come with the kit so that "T" can be connected to use only 1 air fill location to balance your load.
No more need for sway control bars to struggle when pulling your camper with this set up.
This is not a review of the product but a review of the site. This is sold for a 2006 dodge ram. So I purchased it 4 months ago. Well I finally opened the product to install and it is for a 2006 dodge ram 1500. I own a 2500. So this product doesnt have the proper brackets to fit my truck. No where in the descriptions does it mention what model dodge ram it is for. It also doesn't display anything on the box to show you have the wrong product until it is opened and you review the install manual. So do your extra homework to make sure you purchase what actually fits
Game changer, is all I can say. I’m 67 years old and have towed everything from motorcycle trailers, snowmobile trailers, toy haulers, boats and travel trailers. I currently tow a 26’ Keystone Cougar travel trailer that weighs approximately 6800lbs. My tow vehicle is a 2021 Ford F150 powered by a V8.
Once the camper is loaded I install the sway bars and inflate the loadLifter to between 70 - 80 psi depending on payload weight. Once inflated to proper psi the LoadLifter returns the vehicle and suspension to the non-loaded height, this allows the breaking system and steering to function properly. It also helps stiffen the suspension and drastically reduces trailer sway to a minimum.
I’ll never have another tow vehicle without LoadLifters!!!
I purchased the system for my 2013 Ram 1500 to provide lift and added support for the 34'toyhauler (6,000 lbs.) we were purchasing for our move from ME to NC. The system easily allowed the truck and trailer to remain in a level position no matter how we loaded it. Very pleased with it. Money well spent.
I have a 2011 GMC 2500 HD. Installation was fairly easy; must have patience. Instructions indicated could not use U bolts with fifth wheel hitch. In my case, I found with a little finesse I was able to install the U bolts just fine without having to drill holes in the frame. I have a Reese fifth wheel hitch. So far after pulling my trailer one time it works great.
After owning this kit foe a year, I love it. The install went smooth and easy. The app and the remote link up in seconds and it has helped with towing our 5th wheel. It gets the rear-end up so that it is at normal height.
That way I am not blinding people with my lights at night. The truck does ride more smooth with the airbags pumped up while towing. The only negatives are that even with the minimum 5 PSI in the bags, the truck has a more rigid ride when nor towing. The bags also raise the rear end up quite a bit, even when deflated.
Air Lift air springs are good and dependable, use them for the last 25 years on three pick-ups always worked great. My complaint would be against the lousy packaging which came with two or three holes and all messed up, luckily all that was missing was one washer.
They were very easy to install. I’m very happy. I can’t to put my cabover camper on and hit the road . I want to say that Lance and Stacey were both very helpful . In my ordering they were delivered in two days . Love etrailer
Great shipping, instalation instructions were Great and Ride results as expected.
The etrailer Air lift Loadlifter 5000 Air helper springs for my GMC 1500 truck Rear axle worked excellent, they are unreal and I wish I had installed them 15 years ago. I recommend to anyone pulling a large trailer to get these installed on your pull vehicle to reduce the rear end load on your vehicle and stabilize your trailer pulling vehicle.
Easy enough to install. The required drilled holes in a ram 1500 are hard to get in straight as the frame is contoured, it may be better to have a contoured bracket instead of dead space behind the self-tapping bolts. The helper springs work really well. Took me about two hours to install with only a pair of floor jacks.
I was really happy with etrailer and would highly recommend them and have to many people this past year. My motor home needed these air bags and I called the manufacturer and gave them my vin number which has always been what was needed for anything I have had the purchase with any of my vehicles. But the person that I delt with said he needed the frame number I said where do I find that and he said I would have to call the manufacturer of the motor home.So I called Newmar and they said to call ford I called ford and never got a call back . I called etrailer and gave them the vin number and two days later I had the parts and installed them the next day . Thank you for having people that know what they are talking about and making my experience a good one .
just getting done putting my 5000 Justable air springs put them on about three hours I didn’t have any left I did them on the ground so that’s not too bad I’m gonna be sending some pictures along with us so thanks very much and I hope they work
I installed these air lift bags in a day. It was a lot longer than I thought, but it was in the middle of winter in an unheated shop and only basic hand tools. No hoist, so there were a lot of up and down trips with a creeper. Very good installation manual which made the process easy. Very happy with the purchase.
Do you have a question about this Vehicle Suspension?
Condition: Installed
Notes: Item has been installed/test fit and has cosmetic scratches present.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.