bing tracking image
  1. Vehicle Heaters
  2. Zerostart
  3. Engine Block Heater
  4. Freeze Plug Style
  5. 120 Volts
  6. 400 - 599 Watts
THIS ITEM IS NOT A FIT FOR
2002 Chrysler Concorde
Zerostart

Zerostart Custom Fit Engine Block Heater - Threaded Immersion Style - 28 mm - 120V - 400 Watts

Part Number: ZE36FR
$81.12
Retail:$101.40
You Save: 20%
Vehicle Heaters
Not Confirmed to Fit

2002 Chrysler Concorde

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
After a freezing night, your engine can be harder to start. This custom-fit, threaded Zerostart heater warms the coolant before you turn the key, easing cold starts and shortening the time it takes your engine to warm up. Great Prices for the best vehicle heaters from Zerostart. Zerostart Custom Fit Engine Block Heater - Threaded Immersion Style - 28 mm - 120V - 400 Watts part number ZE36FR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1)
  • Q & A (0)
  • Videos (2)
  • Photos

Zerostart Vehicle Heaters - ZE36FR

  • Engine Block Heater
  • Freeze Plug Style
  • 120 Volts
  • Zerostart
  • 400 - 599 Watts

After a freezing night, your engine can be harder to start. This custom-fit, threaded Zerostart heater warms the coolant before you turn the key, easing cold starts and shortening the time it takes your engine to warm up.


Highlights

  • Easier Cold-Weather Starts: Prewarms coolant in your engine block to lessen strain on freezing mornings.
  • Engine-Specific Threaded Fit: 28 mm connection screws into the designated engine-block opening.
  • 400-Watt Coolant Heating: Uses a 120V outlet to preheat your engine before you turn the key.
  • Removable 5' Silicone Cord: Routes toward the grille and detaches if the cord needs replacement.
  • From Phillips & Temro: Zerostart heaters are developed and tested for individual engine applications.

Features to know about

Make Freezing Mornings Easier on Your Engine

After your vehicle sits outside on a freezing night, starting the engine can take more effort than usual. This Zerostart heater warms the coolant inside your engine block before you turn the key, using 400 watts of 120V power. With the engine already warmer at startup, cold starts are easier and it can reach operating temperature sooner, making those early winter departures a little less of a chore.

Find the Right Opening for Your Engine

This is a 28 mm threaded immersion heater. Although it's listed as frost-plug style, it screws into the specified threaded opening rather than pressing into a smooth core-plug hole or sliding into a dry cartridge cavity. Use the vehicle fit information to confirm compatibility, then check the manufacturer's installation instructions for the proper procedure. The 2026 Zerostart catalog linked below will help you find the correct installation location for your specific engine.


Installing it involves draining the coolant, removing the designated threaded plug, and following the application instructions for sealing and tightening. After refilling the cooling system, check for leaks and remove trapped air before powering the heater. That last step matters because the element must stay submerged in coolant while operating.

Keep the Power Cord Handy for Winter Use

The included 5' silicone cord detaches from the heater and connects to a standard 120V outlet. Route it toward your vehicle's front grille and secure it away from hot surfaces or moving engine parts. That gives you an accessible connection for preheating on cold mornings. Remember, always unplug the heater before starting your engine.

Know Who Makes Your Zerostart Heater

Zerostart is a Phillips & Temro brand. The company also develops heaters for original-equipment applications and tests its block heaters for individual engines. You might not recognize the Zerostart name, but Phillips & Temro has experience working with the vehicle manufacturers that need engine-specific heating solutions. It's useful background when you're choosing a heater that needs to fit a particular opening in your engine.

Important Notes:

1. Coolant and Installation

Use a 50/50 mixture of antifreeze and water. Never use straight antifreeze or a mixture containing more than 65% antifreeze, as this can cause the heating element to fail prematurely. Follow the manufacturer's instructions for properly sealing and tightening the heater. Overtightening can damage the threads or compromise the seal.


2. Testing Your Heater

Never plug in the heater before installation to see if it works. Without coolant surrounding the heating element, it can quickly overheat and cause serious burns. Instead, use a multimeter to check resistance across the heater pins while disconnected from power. The manufacturer's general testing guidance specifies a reading between 5 and 100 ohms.


3. Using Your Heater Safely

Always make sure the heating element is fully submerged in coolant before plugging it in. Unplug the heater before starting your engine. Running the engine while the heater is plugged in can create an air pocket around the element, causing it to overheat and fail prematurely.


4. Disconnecting the Power Cord

When disconnecting the heater from your extension cord, firmly grasp each plug and pull them apart. Never yank on the cords themselves. This can damage the connections, potentially causing the heater to malfunction or creating an electrical short.

Specs:

Application:

  • Bore diameter: 28 mm THD
  • Installation position: varies by automobile

Electrical:

  • Voltage: 120V
  • Wattage: 400W
  • Cord length: 5'

Warranty & Certification:

  • 1-Year limited
  • CSA certified


3100006 Zero Start Custom-Fit Freeze Plug Block Heater - Standard Coolant Immersion Heater - 120 Volts - 400W

Installation Details ZE36FR Installation instructionsAlternate Instructions ZE36FR Installation instructions

This Product Fits The Following Vehicles




Video of Zerostart Custom Fit Engine Block Heater - Threaded Immersion Style - 28 mm - 120V - 400 Watts
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Zerostart Vehicle Heaters - Custom Fit Frost Plug Style Engine Block Heater - ZE36FR

Hi everybody, Andy here with etrailer.com. Let's take a quick look at the Zerostart Custom Fit Frost Plug Style Engine Block Heater. Now this is going to fit a wide range of 1990 and newer Honda and Acura vehicles that are equipped with a 1.3 liter to 3.7 liter I4, I5 and V6 engines. And that includes the Accord, Civic, CR-V, Fit, HR-V, Odyssey, Pilot, Ridgeline, Clarity, Passport, and select Acura models such as the MDX, TLX, RDX, ILX, and TSX. Now on custom fit parts such as this heater, I do recommend taking advantage of our vehicle fit guide here at etrailer.com. Simply input the year, make and model of your vehicle and our fit guide will confirm if this will work for you or if we have something comparable that will work for you.

So cold mornings don't have to mean slow starts or long warmups. This custom fit block heater is going to get your engine ready before you even turn the key. By warming up the coolant ahead of time, this is going to help your engine fire up smoothly and reach operating temperature faster so you can hit the road without waiting around. As you know, when temperatures drop, engines can struggle, thick oil, cold metal parts and dry starts, put extra strain on your starter and reduce your engine's life. This block heater is going to take care of all that by pre-warming your coolant.

So your engine's going to turn over quickly, run smoother right away, and it's going to avoid unnecessary wear and tear. And unlike universal heaters that often need tweaking or extra parts, this one as we mentioned is built specifically for your vehicle's engine. So it's going to install right in the frost plug, the spot designed for efficient heat transfer. So this is going to give you a clean hassle-free setup. This is going to give you 400 watts of steady heat at 120 volts and it's going to give you reliable warmth.

It's going to keep your coolant ready to go. And this five foot long silicone cord is removable. So for whatever reason the cord gets damaged, you're not going to have to replace the whole heater. You just need to replace the cord, but it's going to stand up well to tough conditions and it's going to be able to be easily capped at the other end too. This is a nice touch.

I haven't seen this on other engine block heaters before, but you got this tethered cap there that's going to keep those prongs protected and clean when they're not in use. But if you happen to have any questions, whether it's about this heater or any of the other items that we carry here at etrailer.com, don't hesitate to reach out to us. We do want to make sure that you're getting exactly what you want and need. Well, I think it's going to wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.

Ratings & Reviews

5.0

1 reviews
5 Stars
(1)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
I tested out the Zerostart engine block heater, and I like how well it’s designed for cold-weather starts. I was impressed by how solid the build is and how quickly it helps warm the engine. What really stood out to me is that Phillips & Temro actually test fit their heaters and work directly with OEMs to make sure every unit fits and performs the way it should. They’ve got a full engineering team and a cold room big enough to fit a semi-truck, where they test products down to –40°F. It’s a well-engineered heater that’s tested to fit, and that kind of quality control gives me a lot more confidence compared to other brands, like KAT’s, that don’t go through the same level of development. It’s a reliable heater that does exactly what you need when the temperature drops.
1
1
true

See what our Experts say about this Zerostart Vehicle Heaters


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Mary K
Edited by:
Mary K
Employee Daron K
Updated by:
Daron K
Employee Dawn Z
Updated by:
Dawn Z
Employee Alex H
Written by:
Alex H
Employee John S
Video Edited:
John S
Employee Andy C
Installed by:
Andy C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.