Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
46-3/4" Long x 32-3/4" wide x 25-3/8" tall. Truck-bed transfer tank/tool box combo; Brite-Tread aluminum; radius-curve design; stability baffles, cap, drainage plug and coupler for venting; locking tool box is welded on to tank.
Features:
Specs:
Note: Because of the size of this item, it ships via truck freight and only to the contiguous United States.
The DeeZee Way
DeeZee's commitment to "add more life to your truck" is reflected in the design of this Specialty Series transfer tank and tool box combo, which adds functionality to your truck by letting you safely transport up to 92 gallons of non-flammable liquid from one job site to another. It also provides you with a place to store traditional cargo, thereby preventing damage caused by loose items moving around in your truck bed.
Designed for Durability
This DeeZee transfer tank features a radius-curve design, which eliminates welded pressure points, thereby increasing the durability of your transfer tank and extending the life of your tank. In addition, three stability baffles, a cap, a drainage plug and a coupler enable proper ventilation, preventing the vacuum effect. The tool box, which is welded to the transfer tank, is made up of one piece of Brite-Tread aluminum with welded ends. By minimizing the amount of welding that goes into the box's construction, DeeZee diminishes the opportunity for cracks and leaks to form, thereby reducing the risk of tool box corrosion and damage to your stored items. A closed-cell foam gasket offers additional protection from water, and the specially designed, crowned lid boasts a half-pan stiffener that makes it extra strong.
Easy Opening and Closing
The Specialty Series tool box welded on to the transfer tank is designed with locking paddle handles and guide plates. Simply release one of the handles to get into the tool box. An integrated lock deters theft of your belongings and is operated with the provided keys. To close the tool box, simply push down on the reinforced lid.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (148 Customer Reviews)
46-3/4" Long x 32-3/4" wide x 25-3/8" tall. Truck-bed transfer tank/tool box combo; Brite-Tread aluminum; radius-curve design; stability baffles, cap, drainage plug and coupler for venting; locking tool box is welded on to tank.
Save me a lot when I look for lowest price fuel.
I use this on my custom teardrop trailer and I really like this tongue box.
One year later, this is holding up well. The only thing is that the lock hinge started to show a little rust almost right away, but it hasn't progressed too much. It was a little disappointing though.
That said, I love that this has a padlock instead of having to use yet-another small key (I already have 3 just for my teardrop). It wasn't something I considered originally but figured out as soon as I put my combo lock on it.
I do really like this tongue box. It was the perfect addition to my teardrop build.
Boxes arrived in 3-4 days. I got used ones and was very happy I didn’t pay the full price. They work fine just a few dinges. I painted the inside white to see tools easier. The boxes are aluminum, seems very light duty. I wouldn’t step on top of it. When you close the top, the sides flex when pressure is put on the latch. I would have preferred a heavy steel, but needed a small box for the location and this was the only one I could find. For an ATV it might work ok. Overall pretty happy- I just installed so we’ll see how they hold up over time. Next time I would look for a heavy steel one. I paid for 2 used ones the price of one new... to me a new one would not be worth the price they are asking... just too light duty.
The DeeZee tongue box has been an ok box for storing all my off-road gear for my RZR and trailer items. Haven't had any water leaks or problems. Latch and lock have worked correctly. I mounted it on the tongue of my Aluma utility trailer that I use to haul my RZR. Most of the gear I have stored in it is pretty light weight. This box seems to be lite weight constructed; not sure how it would do for heavy items. One year using it and it still works and looks good on my trailer. This review template would not upload my photos??
I luv this thing... I use the fuel tank all the time.. the large capacity is awesome.. the toolbox is fantastic for capacity n the ease to reach.. U will not find a better combo on market today!
First, I like it a lot. There is lots of room inside, it meets my needs and I would buy it again because I think it is a very good value! Cons, Steel latch which means 3 months outside and it is already rusting. (I will eventually replace with a marine grade.) The unit is very strong on the outer sides, but not so much in the middle. I am 200 lbs and can stand on the outer sides of it, but I would not try to do so in the middle. (Note - Manufacturer does NOT recommend standing on it at all and I am not suggesting you do!) Depending on your specific trailer frame and what you intend to put in the tool box you may need to add some bottom support. You can see where I added a support bar in the front. If I was doing this mount over again, I would add a support or 2 in the middle because a couple of spare axle hubs and a bottle jack are causing it to sag significantly.
Well made box. Mounting hardware is woefully in adequate
Packaging is minimal and caused a slight dent.
Tool boxes work great .they hold all my roofing equipment . Leaving the bed of truck for hauling supplies . An the cab of the truck for hauling the crew .thank you so much for these boxes .
i returned the brackets and fashioned my own since one size didn't fit all.
the aluminum cargo bays (one on each side) are a great addition- glad i got them they are very handy and always in use.
heres a beauty shot of our caravan, passenger side, featuring a 5ft. dee zee cargo bay
Phenomenal product, great fit for my job trailer and allows the crew to stand on it if it is necessary to reach the top of the trailer from the front.
Fits 2 group 31 batteries with room to spare. High quality box that looks and works great. The box does not come with battery hold downs, which I prefer because I could mount the batteries any way I wanted.
Seems like a solid lightweight box. The latch and locking mechanism are solid and the hinge is reinforced which is nice. I also like that the gas strut for the lid has a sleeve so if any gear shifts it won't interfere or damage the strut.
Utility box on my camper. This will be a great place to store power cord,water hoses and blocks and a lot easier to get too.
Product does excatly what I want it to do Houses my propane Tanks and Battery with room to spare. Hopfully they won't get stollen again...
Nice box neatly welded and door sealed great and the brackets for this box fit perfect,thanks etrailer
great tool box. I actually had put in speakers. And mounted it to the rear end of my atv I will submit photos as well.
I bought a scratch and dent So I can’t give five star. It came as described with dents on the lid. But it still works fine.
Excellent product and etrailer is my ONLY go to shop for all my trailer/business needs !!
The box is good quality and it fits on my atv. It has a dust and rain gasket on the lid but, it doesnt have any latches to keep the lid closed. I guess I missed that in the description because it doesn't say there are latches, it just says its lockable. If it had a latch it would get 5 stars.
Doing bisiness with etrailer is easy and totally convenient
Very very well built. Excellent fit and finish. I needed a trailer toolbox with these particular dimensions so I bought this underbody box, but I mounted it like a chest (door facing straight up) and it has met my needs perfectly. We don't get a lot of rain in NM so water getting into the chest through the recessed handle area isn't a concern with it mounted in this orientation...plus the trailer is stored inside most of the time.
Wish I knew how to download and send a picture to show my unique application. Mine is mounted on the front of an enclosed trailer and has a battery box installed inside, with room still to carry other essentials. I also plumed in tubing and wiring for a light switch and bright light. The box looks great, fit perfect, works perfect, and I love it. Thank You ETRAILER for a great product.
Very usable truck box at very good pric e.
Do you have a question about this Truck Tool Box?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.