bing tracking image
  1. Trailer Wiring
  2. Hopkins
  3. Wiring Adapters
  4. Multi-Function Adapter
  5. 6 Round
  6. 5 Flat
  7. 4 Flat
Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way
Hopkins

Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way

Part Number: HM47570
In Stock
$32.97
Retail:$34.67
You Save: 5%
Trailer Wiring
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Heavy-duty trailer adapter features a unique Quick-Change wiring plug that lets you switch between 6-way wiring codes quickly and easily. Outlet for 4-way and 5-way plugs is also built in. Terminals are covered with easy-open, weatherproof lids. Great Prices for the best trailer wiring from Hopkins. Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way part number HM47570 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (174)
  • Q & A (0)
  • Photos

Hopkins Trailer Wiring - HM47570

  • Wiring Adapters
  • Multi-Function Adapter
  • 6 Round
  • 5 Flat
  • 4 Flat
  • Plug Only
  • 7 Round - Blade
  • Hopkins

Heavy-duty trailer adapter features a unique Quick-Change wiring plug that lets you switch between 6-way wiring codes quickly and easily. Outlet for 4-way and 5-way plugs is also built in. Terminals are covered with easy-open, weatherproof lids.


Features:

  • Trailer adapter changes your vehicle's 7-blade connector to a 6-pole
    • 4-Pole and 5-pole flat connectors also built in
  • Quick-Change plug on 6-pole terminal accommodates both 6-pole trailer wiring codes - center-pin brake or center-pin hot
    • Simply remove plug at base of connector, turn it around and plug it back in - no need to rewire
  • Reinforced, easy-grip covers
    • Open 180 degrees for effortless connections
    • Internal seals for ultimate weatherproofing
    • Rugged, oversize hinge
    • Terminal grease packet included
  • Works with 6-way, 5-way flat and 4-way flat trailer connectors
  • 3-Year warranty


Quick-Change Plug

This adapter not only changes your vehicle's connector from a 7-way RV blade to a 6-way, 5-way or 4-way, it also has a patented Quick-Change wiring plug to accommodate both 6-pole wiring codes. Just remove the plug at the the base of the adapter, turn it and replace it to switch to a center-pin-hot design from center-pin-brake design, or vice versa. No rewiring necessary.

The heavy-duty, weather-resistant housing and covers on this adapter provide maximum durability. Even the oversize lid hinge is built to last, allowing the lids to open a full 180 degrees for simple connecting without breaking off.






47570 Hopkins Endurance Multi-Tow Adapter - 7 RV to 6 Pole (2 Wiring Codes), 5 Wire and 4 Wire Flat

Installation Details HM47570 Installation instructions


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way - HM47570

Average Customer Rating:  4.9 out of 5 stars   (174 Customer Reviews)

Heavy-duty trailer adapter features a unique Quick-Change wiring plug that lets you switch between 6-way wiring codes quickly and easily. Outlet for 4-way and 5-way plugs is also built in. Terminals are covered with easy-open, weatherproof lids.

by:

My '92 GMC Sierra had a 6-pin trailer harness connector and I'm going to be pulling a pop-up camper in a few weeks that has a 7-pin connector. I originally ordered a 47435 6-Pole to 7-Pole Trailer Wiring Adapter. After thinking about it for a day I changed my mind and ordered a HM48470 Hopkins Endurance Multi-tow 7-way, 5 & 4-wire Flat Connector to mount in the bumper and a HM47570 Hopkins Endurance Multi-tow Connect Adapter - 7-way To 6-way, 5-way and 4-way. The HM48470 will allow me to pull the pop-up as well as giving me the 4-wire flat connector that I need for my boat trailer. I bought the HM47570 adapter just to cover all the trailer wiring needs I might run into. I really like the fact that the 47570 adapter has the quick change plug to cover both wiring arrangements for 6-pin trailer connectors.

I placed the original order Saturday evening and the second order Sunday afternoon. Monday morning, I called etrailer.com to try to cancel the first order and was told that both orders were already boxed and on the way the shipper. I had no idea that they had people there to pull and box orders on the weekend. I asked about returning the first order when it arrived and was told by Helen M that it would be no problem at all.

I have been extremely pleased with my purchase experience with etrailer.com. Everyone I spoke with there was very knowledgeable and I will not hesitate to go directly to them for my trailer and towing needs in the future.



by:

I needed an adapter for my electrical towing harness so the that I could use a 5-Way connector on my 7-WAY plug. On line, I found and ordered Item No. HM47570 "HOPKINS ENDURANCE MULTI-TOW CONNECTOR ADAPTER - 7-WAY to 6-WAY, 5-WAY or 4-WAY." When I received the product, I was really stoked, it was exactly what I needed and what I had been looking for! I tried it on for "size" as you might say and it's going to work like a charm. I will send some photos later when I'm done with the installation! No time right now. . this coming weekend! Photo 1&2 my connector; Photo 3&4 the new HM47570; Photo 5,6,&8 the light bar I wanted to install and the completed project. Thanks a bunch!



by:

PERFECT ITEM... NOT ONLY DOES IT WORK FOR MY SPECIFIC APPLICATI0N... BUT GIVES ME OPTIONS TO HOOK UP MOST ANY TYPE TRAILER WIRING...



by:

This is the best all in one connector for your 7 way wiring harness. It allows you to use pretty much every connector for personal vehicle trailers.



by:

Just what i needed.



by:

Received item in new condition, shipped promptly, no issues.



by:

Item as described. Delivered when promi sed



by:

This product really is just "plug-and-play". I have a 2012 Chevy Traverse with the strongest towing package available for that vehicle. It comes with a 7 way receiver. I tow a 1998 viking 2490 pop-up camper that came with a standard 4 pin which I rewired to a 6 pin round adapter so that I could add a battery to the trailer and charge it while I was going down the road. It works great! No problems whatsoever. This is actually the second HM47570 that I have owned because I backed the first one into a high snow bank and broke it.



by:

This is truly an all in one hitch plug adapter. I help several neighbors from time to time, pull many varied trailers, on a highly trafficked recreational river. I haven’t found a trailer plug I can’t plug into this adapter. And it’s parts are holding up well after a year. One and done! You’ll need a 7 pin hitch receptacle and then you’re covered for 7 pin, 6, 5 ( yes, the 5 pin), and 4 pin plugs. Bought a couple more for neighbors that had 7 way plugs on their vehicles.



by:

This trailer connection works as advertised. The best thing is the reversible switch apparatus which allows one to go from one type of connection, i.e. 12-volt, to a pole for brakes. It's nifty.

Michael N. profile picture

Michael N.

9/7/2020

I have used this product several times during the past year of ownership. Works great. Really handy.



by:

Just what I needed to be able to connect virtually any trailer to my vehicle. Price is good, shipping $ were reasonable, and product was received quickly. etrailer is my first choice for all things towing

Roy profile picture

Roy

12/12/2022

After a year, the wiring kit is still 100. Have used it several times on both personal and rental trailers



by:

This has to be the coolest adapter I have ever owned. I needed to tow a boat with surge brakes and needed power from the reverse lights to prevent the surge brake from locking up the trailer while backing. I was not sure this would work but thought I would give it a try. It is a little larger than expected and felt like it sagged down a little when plugged into the truck. However, the spring door caught the top of the adapter with no problem. I plugged my 5 flat plug on the trailer and and put it in reverse. worked like a charm. I checked with a multi meter and indeed 12v were sent to the 5th plug on my 5 flat when in reverse. I can now pull three trailers I own with this one adapter. I have a 5 flat, 4 flat and 6 round plug on each of the three trailers. If a purchase a trailer with electric brake, you can pull the plug, turn it 90 degrees and plug it back in. Watch the video etrailer produced describing this outstanding adapter. I will be ordering a second as a backup. Oh....just towed a trailer 250 miles and the adapter was still secure in the truck ever though it sagged a little.



by:

This trailer plug adapter is a "must have" item if you have a truck set up for Hot Shot or if you pull several different types of trailers. I use this adapter at least 3 times a week (plus I have 7 round pin plug for hauling agriculture trailers). I haven't had to use the "trailer break reversal" wire yet, but this is the main reason to purchase this adapter. This is a well built, Great product, well worth the money.



by:

My stock plug has a pretty tight cover that bends the wires on my flat plug for my utility trailer a bit too much for my comfort and this one just flips up and snaps closed, so no tension when it is open. Works very well for my wiring and I have many options for plugs than I had to begin with. I use this all the time and it is great!



by:

Being a former boat dealer, now a fisherman, and a rancher, I back-up to, and, tow a lot of different stuff. This lets me make sure my hook-up is "legal" with lights!! The ball mount works great with my NEW tow vehicle!! The vehicle is a 3/4 ton, and, comes with a 21/2" to 2" adapter for the factory receiver. The locks & the rest are just niceties in this "steal whatever you need" society?!!



by:

As advertised. Well made too. The spring for the cover/seal is robust and I don't expect it to weaken. The adapter works perfectly with my Pollack 7 pin outlet and captures on the retaining clip as both are desiged, so the adapter is securely in place down the road.

The ability to reverse polarity on the 6 pin trailer brake set up is really nice, but I suggest to have a pair of needle nose pliers handy to stuff the wires back in the housing so you can get the two terminal plug re-inserted. A bit to fiddle with, but once you set it up for your own trailer, you never would mess with it again. Good product. You wont be disappointed.



by:

This adapter sold by etrailer.com solved my wiring problem pronto ! My "new" 2012 Buick only had a 7 point RV plug. I needed a 4 pin trailer outlet. Did not want to rewire half the car to get one. Vanessa at etrailer knew immediately what the fix was. Adapter worked as advertised. Problem solved. Great customer service !





by:

Works great. I’ve had no issues whatsoe ver!



by:

This thing is a beauty, if you have a 7 pole trailer wiring kit, this is a must have. You will never need another set of adapters because you're covered from 4 pole to 6 pole with the adapter and 7 pole when you remove it. Can't go wrong, great quality and the reverse mode for hot circuit/trailer brakes is a great touch. 10/10



by:

This little unit is a must if you ever rent or borrow a trailer. It'll get you through any trailer connector need. As always, the purchase and shipment from etrailer were awesome.

Rick J. profile picture

Rick J.

5/17/2018

Thank you for checking in. I am still happy with my purchases - Ive had occasion to use my Hopkins adapter several times. We own two now, and theyve never given us a moments trouble. Great item to have in the console of every potential tow vehicle.



by:

I needed an adapter for my electrical towing harness so the that I could use a 5-Way connector on my 7-WAY plug. On line, I found and ordered Item No. HM47570 "HOPKINS ENDURANCE MULTI-TOW CONNECTOR ADAPTER - 7-WAY to 6-WAY, 5-WAY or 4-WAY." When I received the product, I was really stoked, it was exactly what I needed and what I had been looking for! I tried it on for "size" as you might say and it's going to work like a charm. I will send some photos later when I'm done with the installation! No time right now. . this coming weekend!



by:

NOW THIS IS PERFECT FOR HOOKING UP AN EXTRA LIGHT AND OR DISCONNECTING BRAKES REAL FAST IF THERE IS AN ISSUE GREAT ITEM AT A GREAT PRICE

Dan C. profile picture

Dan C.

11/23/2017

works great , use it all the time



by:

This is the adapter that I have been looking for. I was skeptical at first as I deal with vintage utility trailers. These types of trailers have heavy long metal cylinder 6 plug connectors and the fear of keeping them from falling out (along with the adapter is huge. The heavy conductors fit nicely into the adapter. I tie a couple of small ball bungees around everything just to be safe. My only complains is that I wish they were Made in America!



by:

Perfect for trailering my boat (5 flat plug). FINALLY resolved my issue with trailer brakes locking up in reverse. Appears to be well made as I have used it for a year and still works fine.



by:

I have other Hopkins Multi-tow trailer adapters. I like that this one can operate both 6 way types. Whether it was the brake used or neutral. All you have to do I remove the piece and flip it around. You do not need two adapters.


25
174
Show More Reviews

See what our Experts say about this Hopkins Trailer Wiring

  • How To Install 6-Way On 2015 Jeep Wrangler Using Hopkins Wiring Kit for Towed Vehicles
    The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56200 which is a it for a 2015 Jeep Wrangler only comes with a 4-way. There aren't any custom fit options that come with a 6-way but all you will need to convert the above is cut off the 4-way and wire on the RoadMaster 6-Wire Trailer Connector part # RM-910030-7 then use the Roadmaster Bent Electrical Socket Bracket part # RM-910030-5 to mount it. There would then be an extra terminal so you can use the Roadmaster Battery...
    view full answer...
  • Adapting a 7-Way on a 2003 Chevy Silverado to a 6-Way Round Trailer Connector on Big Tex Trailer
    If your 2003 Chevy Silverado has a 7-Way connector I recommend keeping the 7-Way that you have # 54006-059, and using it to replace the 6-Way on the trailer. A 6-Way is not nearly as common as a 7-Way blade style connector. You just have to determine the functions of the wires on the trailer and wire them to the new 7-Way accordingly. The functions on the 7-Way should be as follows: White Wire = Ground Red Wire = Left Turn and Brake Brown Wire = Right Turn and Brake Green Wire = Tail...
    view full answer...
  • Trailer Wiring Harness Recommendation to Add a 4-Way to a Vehicle that has a 7-Way
    What you would want is the part # C55384. This will plug in line with your current 7-way to allow you to add a 4-way trailer wiring harness to the rear of your vehicle. I attached an install video for you to check out as well.
    view full answer...
  • Recommended Parts for Re-Wiring 5-Pole Flat Boat Trailer to Match Truck 7-Way Wiring
    Adapters like # 37385 and # HM47570 are convenient and can work fine for the short-term but for long-term reliability you are really better off replacing the connector on the trailer to a 7-way that matches your truck with no adapters - or their potential problems. Those extra connections can mean more chances for corrosion. You can easily test your truck's 7-way using a circuit tester like # PTW2993. Have a helper activate each function while you apply the tester to the appropriate pins...
    view full answer...
  • What is the Configuration of a 6-Pole Trailer Connector
    I have attached a picture that show the configuration of a 6-Way. The pins on the trailer connector should be configured as follows: 1 O'clock position - Blue Brake Controller 5 O'clock position - Green Right Turn/Stop 7 O'clock position - Yellow Left Turn/Stop 10 O'clock position - White Ground 12 O'clock position - Brown Tail and Running Lights Middle - Black 12V Power Please note that for some applications the middle pin which is Black for 12V Battery Power might be swapped with the...
    view full answer...
    Image 1 for Image 2 for
  • Winnebago with Seperate Taillights Towing a Jeep and Troubleshooting Brake Lights not Working
    Since you have connected your Winnebago to both your Jeep and boat trailer and are experiencing the same issue it is likely related to the vehicle wiring on your Winnebago that is the issue. The first thing that I would check would be the vehicle connection 6-way on your Winnebago and make sure that all the wiring to the connection points are in-tact and that the pins do not show any signs of corrosion or damage. You will want to use a circuit tester like part # PTW2993 to test the...
    view full answer...
    Image 1 for Image 2 for
  • Adding a 7-Way Trailer Connector to a Trailer with a Surge Brake Coupler w/Electric Reverse Lockout
    It is possible to re-pin an adapter like # HM47570, but it would be much easier to add a 7-Way trailer connector to the trailer side and wire it accordingly to function with your reverse lockout. You can use Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End, # PK12706, and wire it to match your vehicle side 7-Way. The center pole on the vehicle side 7-Way will need to be connected to the reverse light circuit. The new trailer side 7-Way would then need to be wired...
    view full answer...
  • Installing 7-Way Connector and Brake Controller on my 2014 Audi Q5
    If you currently have a working 4-Way plug then using the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation Kit part # ETBC7 kit is a great way to get a powered 7 Way connector on the rear of your 2014 Audi Q5. You can use the Curt No-Drill Bracket part # C57202 to attach the 7-Way to. The bracket will mount around the tube of your hitch and really does a great job staying solid. With this kit using the Curt Echo part # C51180 is an easy way to add a brake controller that...
    view full answer...
  • Trailer Brakes Do Not Work When Using 7-Way to 6-Way Adapter with a 2010 Chevy Silverado
    The problem that you are experiencing is likely happening because there are 2 different ways to wire a 6-Way trailer connector. The brake output pin will wither be the center pin or it will be in the 2 oclock position, if looking at the face of the trailer side connector. Which ever one that it is, the other one would be the 12 volt circuit. Normally when this happens the trailer brakes will immediately lock up. But it is possible because you have a Chevy truck that the 12 volt circuit...
    view full answer...
  • Available 7-Way to 4-Pole and 5-Pole Wiring Adapters
    Yes, a 4-pole flat type trailer connector can mate with a 5-pole flat. The additional circuit on the 5-pole side would obviously not be connected. But we do have 7-way to 4-pole cord-type wiring adapters too, similar to 7-to-5 adapter # A57CCB, such as # HM47065, and # C57271. We also have plug-style adapters such as # HM47570 that convert a 7-way to 4-, 5- and 6-pole, all in one product. All wiring adapters are shown on the linked page.
    view full answer...
  • 7-Way to 6-Way Trailer Wiring Adapter with Center Pin 12 Volt Accessory
    For a 7-way to 6-way adapter you'd want the part # HM47570 that you referenced. This adapter was designed to easily swap between the two standard 6-way configurations where the center pin can be the 12 volt accessory circuit or the brake output circuit. Check out the review video I attached for more info as well.
    view full answer...
  • Can I Add A Wire Harness To My Camper To Make It Tow Another Utility Trailer
    We highly recommend against double towing and many states either don't allow double towing or have numerous restrictions. There are some states that limit the total length of all 3 units, some only allow certain types of trailers behind the 5th wheel trailer, and some require a special endorsement on your license to be allowed to double/triple tow. I recommend checking the laws for any state you plan on double or triple towing in. You will have to use a universal fit wiring harness like...
    view full answer...
  • Recommended 6-Way Trailer Socket Compatible with Factory US Car Connector Wiring like 2013 Durango
    For your 2013 Dodge Durango with factory 7-way which uses the standard US Car connector wiring, you can use the Hopkins Replacement Multi-Tow 6-Way and 4-Way Trailer Connector # 40965 you referenced. It will plug right into your factory wiring and give you the 6-way trailer connector as well as the 4-way trailer connector without changing any wiring. This will be plug and play with your factory wiring. Another option is to keep your factory 7-way and use the Hopkins Endurance Multi-Tow...
    view full answer...
  • 2018 VW Atlas 7-Pin Round Vehicle Connector and Brake Controller for Use w/ a 6-Way Adapter
    Thanks for the picture! It looks like your 2018 VW Atlas has been wired for a 7-way and has everything but the actual 7-way connector. To use the Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way item # HM47570 you will need the Hopkins Endurance Quick-Install 7-Way Trailer Connector item # HM40940. Both of these combined will give you a 6 pin round and a 4-pin flat connector. I have linked a review video that you will want to watch when connecting your...
    view full answer...
    Image 1 for
  • Trailer Brakes Lock as Soon as Trailer is Plugged Into Tow Vehicle
    I have a sneaking suspicion that your travel trailer might have a 6-way connector on it, but your truck has a 7-way, and you're using an adapter like part # 47549. Am I on the right track? There are two accepted ways of wiring a 6-way trailer connector. One uses the center pin as the brake output circuit, the other used the center pin as the 12-volt power feed to the trailer. If the connector on your trailer is wired one way, and your adapter is wired the other, it would cause your trailer...
    view full answer...
  • How To Convert a 4-Way To a 5-Way For Using Electric Lockout On Surge Coupler
    In order to utilize the electric lockout feature on your Tie-Down Engineering (TDE) Brake Actuator you will need to install the Hopkins Endurance 5-Way Flat Trailer Connector part # HM47910 on the trailer and the Adapter 4-Pole to 5-Pole Trailer Wiring Adapter part # 47515 on the vehicle if you have a 4-way. If you have a 7-way you will need to install the Adapter 7-Pole to 4-Pole and 5-Pole part # 37385 or the Hopkins Endurance Multi-Tow Trailer Connector Adapter part # HM47570 on the vehicle.
    view full answer...
  • Installing Roadmaster Brite-Lite Converter # RM-732 with Roadmaster Tail Light Wiring Kit # RM-155
    The Roadmaster Brite-Lite Wiring Converter # RM-732 can deliver brighter light output than other brands of similar products. It takes in separate stop and turn signals on 3 wires on its right-hand side and outputs combined stop/turn signals on two wires on its left-hand side. Please refer to the linked photo. The converter wires in upstream of the connector on the MH. The running light circuit from the MH will bypass the converter and go directly to the diodes in kit # RM-155. I have attached...
    view full answer...
    Image 1 for Image 2 for
  • Running Light Circuit Blows on 2001 GMC 3500 Using 7-Way to 6-Way Adapter
    Also you will want to make sure that the trailer connectors on the vehicle and trailer are clean and free of corrosion. Also make sure that there are no frayed wires from the trailer connector to the tail lights because there could be a short causing the whole issue. Also make sure the main trailer connector ground and the grounds for all of the lights are attached to clean and corrosion free bare metal surfaces. There are 2 different ways that a 6-Way connector can be wired. The center...
    view full answer...
  • Available Wiring Adapters to Provide Both 7-Way and 4-Pole Connectors
    Hopkins 7- and 4-Pole Trailer Connector Socket # HM40975 is a replacement trailer connector that has both 4-pole flat and 7-way blade style connectors. It installs on a round U.S. Car Connector type plug. This is not an adapter that converts one wiring format to another. If you want an adapter that plugs in to a 4-pole and provides both 4-pole and 7-way connectivity then you can use part # 37185 or # C57674. This will plug in to your 4-pole wiring and provide those lighting signals in...
    view full answer...
  • Replacement 4 and 7-Way Trailer Connector for a 2000 Ford F-350
    You can use the Hopkins 4/7-Way connector # HM48470. All you will need to do is attach the wires from the old connector in the same places on the back of this connector then mount it where you want it. No other wiring harnesses are needed. The replacement 7-Ways we have for a 2000 Ford F-350 that also have the rectangular plug do not have a built-in 4-Way. We have # C55243 and # 118243. You could use one of these and then use an adapter, # HM47570. If the truck came with the factory 7-Way...
    view full answer...
  • No Power to Left Turn Signal/Brake Light Pin on 2015 Nissan Armada Trailer Connector
    It sounds like there is either a tow package fuse that is blown or missing or a tow package relay that is bad or missing. Your Armada has fuse panels under the hood and in the cab on the passengers side. Check the lids of these panels for the fuse and relay locations. If it is a relay then you could use # C57000.
    view full answer...
  • Diameter of 6-Way on Hopkins Endurance Multi-Tow Trailer Connector Adapter # HM47570
    The 6-way socket of the Hopkins Endurance Multi-Tow Trailer Connector Adapter # HM47570 that you referenced is designed to fit the standard 6-way connectors like what you have that measures 1 inch in diameter.
    view full answer...
  • Fit of Hopkins Multi-Tow Trailer Connector Adapter HM47570 on 2018 Volkswagen Atlas
    The Hopkins Multi-Tow Trailer Connector Adapter # HM47570 will work in the 7-way trailer socket on virtually any vehicle that has one. This item converts the 7-way connector format to three others that are in common use: 4-pole flat, 5-pole flat and 6-pole round. All of these types of trailer connectors are illustrated and explained in the linked article that covers all types of trailer wiring. Do please note that is not a stand-alone wiring product; it requires that the vehicle already...
    view full answer...
    Image 1 for
  • Available Wiring Adapters to Join Vehicle 7-Way to Trailer 6-Way Round Connector
    We offer several trailer wiring adapters that can convert a 7-way blade connector on the vehicle to a 6-way round pin connector on the trailer. You can see all of these on the linked page. These include solid adapters like # HM47570 as well as cabled types like # HM47053 and # HM47083. I recommend a cabled adapter since it will provide strain relief and make it easier to do the connections. You need to note that a 6-way can be configured in either of two ways. Please refer to the linked...
    view full answer...


< Previous
123. . .5



Do you have a question about this Trailer Wiring?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video by:
Kathleen M
Employee Alan C
Video by:
Alan C
Employee Shane T
Installed by:
Shane T
Employee Randy B
Installed by:
Randy B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.