Weld on Receiver Tubes from Buyers Products are available in a variety of lengths, dimensions, and finishes to match your towing needs. The 2" I.D. receiver tube features a cast steel collar and a solid stress collar opening. The 6" plain finished tube contains a 5/8" hitch pin hole and can achieve a rating up to 20,000 lbs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna take a look at the 6" long, 2" x 2", raw finish, weld-on receiver tube.Now these weld-on receiver tubes are available in a variety of lengths, dimensions and finishes to match your towing needs.This part happens to be the 6" long version. Now this is a 2" x 2" receiver tube. The internal dimensions are 2" x 2".It features a nice cast steel collar, solid stress collar opening. This 6" long tube contains a 5/8" diameter hitch pinhole, and it can achieve a rating of up to 20,000 pounds. It's a carbon steel construction, and it is a raw finish. And it does go all the way through.
Both ends are open. I'll show you right there.And just to measure it for you, one end to the other, is right at 6" in length. And, again, the maximum gross trailer weight capacity is 20,000 pounds.But that should do it for the review on the 6" long, 2" x 2", raw finish, weld-on receiver tube.
Average Customer Rating: 5.0 out of 5 stars (14 Customer Reviews)
Used this to build a front receiver hitch for our little Grand Cherokee for when we are not using the tow bar. Came out nice. 837437
etrailer is the first place I check when I need a trailer part or truck accessory. Several times, I have found myself thinking "why doesn't somebody make such and such" for an application I envisioned, and, sure enough, I found it on etrailer. This time, I was out of patience with the trailer ball that I used through a hole I torched in my tractor bucket. I frequently use the tractor to move various trailers around, but it has gotten to be a pain taking the ball on and off to change ball sizes, or to keep the underside of the bucket flush when scraping and loading. The ball shaft and nut would dig a gouge whenever I used the bucket to load materials. This 2 inch reciever tube is built stout, and I wanted it unfinished, so I could weld it on my bucket. The price was right, and it arrived quickly, just a few days. I am quite happy with the part, and how easy it was to fabricate it to my bucket. Photos are attached. 837201
Heavy duty product. 824291
I am very satisfied with the quality of the hitch receivers we buy from you and your customer service/follow up procedure is second to none. Flawless, thank you! 819749
This is where I buy all my trailer parts. Whether for fabrication or replacement parts. They always have what I need and you can't beat the prices even with the shipping costs. Also the quality is just as good if not better than what I can buy locally. 782621
Excellent product, has a nice trim for a nice looking receiver. 760564
Great product as expected. E-Trailer continues to outperform the competition in price, service, and quality. 653766
We like the square flange on this and it works well with our rack system. 642015
I needed to fabricate a receiver for a John Deere lawn tractor and this worked perfectly. Great product! Fast Delivery 637206
Great service and customer service was very knowledgeable! 636681
Nice piece... will work perfect when fabricated onto a dozer blade for moving trailers on construction site 593569
Great hitch at a great price 588927
Well made hitch receiver. 527378
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.