LED Taillight Recommendation for a 1968 Heilite Trailer
Published 01/06/2015
Products Featured in This Question
Question:
Hi, I have an old 68 Heilite trailer with new wiring but old lighting fixtures for the tail lights. The bulbs bounce around during towing and lose contact so it starts out working and then mid-trip the lights fail. I was looking to replace with LED lights. Do you have any kits with just the wiring and tail light socket? I didnt know if part 294-0967 would work but was wondering if you can tell me what the diameter is to see if it would fit what I have. Any help/suggestions would be appreciated. Thanks!
asked by: Bertha
Expert Reply:
We have exactly what you need, but the # 294-0967 is for tow bar lighting for vehicles that are getting flat towed so it wouldn't be a good choice for you.
For a similar light to what you have on your trailer that would be LED I would recommend the # STL23R24B. For a wiring harness you would want the # A45PB. For a mounting flange you would want the # A45BB.
Product Page this Question was Asked From
Miro-Flex LED Trailer Light w/ Reflector - Brake, Turn, Tail - Submersible - Round - Red - 24V
- Trailer Lights
- Tail Lights
- Stop
- Tail
- Turn
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 4-5/16 Inch Diameter
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Pin Recommendation for Fastway Weight Distribution System
- Q&A: Is the Optronics 21 Diode LED Trailer Taillight the Brightest
- Q&A: Replacement Drop Leg 12K Jacks for a 2016 14k PJ Trailer
- Q&A: Does Sealed, 4 Round Trailer Turn Signal and Parking Light Come with Wiring Harness
- Article: Types of Bumpers
- Q&A: Trailer Lights Available for a 24V System
- Q&A: Does Optronics LED Trailer Clearance Light MCL66A24B Need Mounting Plate
- Q&A: Comparing the ST51RB to the ST52AA for Function and Cost