Replacement 4 Inch by 2 Inch Round Tail Light for a 2006 Damon Intruder RV

Updated 09/07/2010 | Published 09/03/2010

Products Featured in This Question

Optronics Trailer Tail Light - Stop, Turn, Tail - Submersible - Incandescent - Round - Red Lens

(2565)

$8.30

Rubber Grommet for 4" Round Trailer Lights - PVC

(229)

$4.44

3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead

(389)

$4.69

Miro-Flex LED Trailer Light w/ Reflector - Brake, Turn, Tail - Submersible - Round - Red - 24V

(428)

$20.66

Question:

I have a 2006 Damon Intruder RV .....the tail lights are Glo-Brite Part # 9541 i was wondering if your part # ST45RB would work the GLO-BRITE measures 4x2 Any help would be appreciated...Thanks

asked by: David B

Expert Reply:

The closest match we have to your existing Glo-Brite taillight is the Sealed, 4 inch Round LED Trailer Stop, Turn and Tail Light, Flush Mount, 3-Function, 12 Super Diode, # STL23R-24B. It measures 4 inches in diameter and 1-15/16 inches deep. To install this light, you would also need Rubber Grommet for 4 inch Round Trailer Tail Lights, # A45GB, and Straight 3-Wire Pigtail for Sealed Trailer Stop, Turn and Tail Lights, # A45PB.

Since this light is an LED, if you determine that it is the correct fit, I recommend changing out both taillights so that they match.

The ST45RB that you have referenced probably will not work as it is slightly larger than 4 inches by 2 inches (it is 4-1/4 by 2-1/16 inches).

expert reply by: Michael H